Canon PowerShot SX730 HS vs. Sony Cyber-shot DSC-TF1
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon PowerShot SX730 HS | Sony Cyber-shot DSC-TF1 | ||||
check price » | check price » |
Megapixels
20.30
16.10
Max. image resolution
5184 x 3888
4608 x 3456
Sensor
Sensor type
CMOS
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Canon PowerShot SX730 HS | Sony Cyber-shot DSC-TF1 |
Surface area:
28.46 mm² | vs | 28.46 mm² |
Difference: 0 mm² (0%)
SX730 HS and TF1 sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Canon SX730 HS (2017) and Sony TF1 (2013).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.35 µm² (25%)
A pixel on Sony TF1 sensor is approx. 25% bigger than a pixel on Canon SX730 HS.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon SX730 HS
Sony TF1
Total megapixels
21.10
16.40
Effective megapixels
20.30
16.10
Optical zoom
40x
4x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80-3200
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
5 cm
50 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
24 - 960 mm
25 - 100 mm
Aperture priority
Yes
No
Max. aperture
f3.3 - f6.9
f3.6 - f4.7
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
15 sec
2 sec
Max. shutter speed
1/3200 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
5
8
Screen size
3"
2.7"
Screen resolution
921,600 dots
460,800 dots
Video capture
Max. video resolution
1920x1080 (60p/30p)
Storage types
SD/SDHC/SDXC
SD/SDHC/SDXC/Memory Stick Duo/Memory Stick Pro Duo, Memory Stick Pro-HG Duo
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
NB-13L lithium-ion battery
Lithium-Ion NP-BN battery
Weight
300 g
152 g
Dimensions
110.1 x 63.8 x 39.9 mm
102.4 x 62 x 22.7 mm
Year
2017
2013
Choose cameras to compare
Popular comparisons:
- Canon PowerShot SX730 HS vs. Panasonic Lumix DMC-TZ80
- Canon PowerShot SX730 HS vs. Canon PowerShot SX720 HS
- Canon PowerShot SX730 HS vs. Sony Cyber-shot DSC-HX60
- Canon PowerShot SX730 HS vs. Nikon Coolpix A900
- Canon PowerShot SX730 HS vs. Sony Cyber-shot DSC-HX90V
- Canon PowerShot SX730 HS vs. Panasonic Lumix DMC-TZ70
- Canon PowerShot SX730 HS vs. Sony Cyber-shot DSC-WX500
- Canon PowerShot SX730 HS vs. Sony Cyber-shot DSC-HX80
- Canon PowerShot SX730 HS vs. Canon PowerShot SX620 HS
- Canon PowerShot SX730 HS vs. Canon IXUS 285 HS
- Canon PowerShot SX730 HS vs. Canon PowerShot G9 X Mark II
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon SX730 HS diagonal
The diagonal of SX730 HS sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Sony TF1 diagonal
The diagonal of TF1 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
SX730 HS sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
TF1 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
SX730 HS pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 5196 pixels
Sensor resolution width = 5196 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.19 µm |
5196 |
TF1 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4627 pixels
Sensor resolution width = 4627 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.33 µm |
4627 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
SX730 HS pixel area
Pixel pitch = 1.19 µm
Pixel area = 1.19² = 1.42 µm²
Pixel area = 1.19² = 1.42 µm²
TF1 pixel area
Pixel pitch = 1.33 µm
Pixel area = 1.33² = 1.77 µm²
Pixel area = 1.33² = 1.77 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
SX730 HS pixel density
Sensor resolution width = 5196 pixels
Sensor width = 0.616 cm
Pixel density = (5196 / 0.616)² / 1000000 = 71.15 MP/cm²
Sensor width = 0.616 cm
Pixel density = (5196 / 0.616)² / 1000000 = 71.15 MP/cm²
TF1 pixel density
Sensor resolution width = 4627 pixels
Sensor width = 0.616 cm
Pixel density = (4627 / 0.616)² / 1000000 = 56.42 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4627 / 0.616)² / 1000000 = 56.42 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
SX730 HS sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 20.30
Resolution horizontal: X × r = 3907 × 1.33 = 5196
Resolution vertical: X = 3907
Sensor resolution = 5196 x 3907
Sensor height = 4.62 mm
Effective megapixels = 20.30
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3907
Sensor resolution = 5196 x 3907
TF1 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.10
Resolution horizontal: X × r = 3479 × 1.33 = 4627
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
Sensor height = 4.62 mm
Effective megapixels = 16.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
SX730 HS crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
TF1 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
SX730 HS equivalent aperture
Crop factor = 5.62
Aperture = f3.3 - f6.9
35-mm equivalent aperture = (f3.3 - f6.9) × 5.62 = f18.5 - f38.8
Aperture = f3.3 - f6.9
35-mm equivalent aperture = (f3.3 - f6.9) × 5.62 = f18.5 - f38.8
TF1 equivalent aperture
Crop factor = 5.62
Aperture = f3.6 - f4.7
35-mm equivalent aperture = (f3.6 - f4.7) × 5.62 = f20.2 - f26.4
Aperture = f3.6 - f4.7
35-mm equivalent aperture = (f3.6 - f4.7) × 5.62 = f20.2 - f26.4
More comparisons of Canon SX730 HS:
- Canon PowerShot SX730 HS vs. Panasonic Lumix DC-TZ90
- Canon PowerShot SX730 HS vs. Panasonic Lumix DMC-TZ100
- Canon PowerShot SX730 HS vs. Sony Cyber-shot DSC-RX100 V
- Canon PowerShot SX730 HS vs. Panasonic Lumix DMC-ZS60
- Canon PowerShot SX730 HS vs. Canon PowerShot SX60 HS
- Canon PowerShot SX730 HS vs. Sony Cyber-shot DSC-HX350
- Canon PowerShot SX730 HS vs. Nikon Coolpix B700
- Canon PowerShot SX730 HS vs. Canon PowerShot SX710 HS
- Canon PowerShot SX730 HS vs. Canon PowerShot SX740 HS
- Canon PowerShot SX730 HS vs. Canon PowerShot G7 X Mark II
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.