Kodak EasyShare Z915 vs. Kodak EasyShare Z1012 IS
Comparison
change cameras » | |||||
|
vs |
|
|||
Kodak EasyShare Z915 | Kodak EasyShare Z1012 IS | ||||
check price » | check price » |
Megapixels
10.00
10.00
Max. image resolution
3648 x 2736
3648 x 2736
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.03 | : | 1 |
(ratio) | ||
Kodak EasyShare Z915 | Kodak EasyShare Z1012 IS |
Surface area:
28.46 mm² | vs | 27.72 mm² |
Difference: 0.74 mm² (3%)
Z915 sensor is slightly bigger than Z1012 IS sensor (only 3% difference).
Note: You are comparing cameras of different generations.
There is a 2 year gap between Kodak Z915 (2009) and Kodak Z1012 IS (2007).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.07 µm² (3%)
A pixel on Kodak Z915 sensor is approx. 3% bigger than a pixel on Kodak Z1012 IS.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Kodak Z915
Kodak Z1012 IS
Total megapixels
Effective megapixels
10.00
10.00
Optical zoom
10x
12x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
60 cm
60 cm
Macro focus range
10 cm
12 cm
Focal length (35mm equiv.)
35 - 350 mm
33 - 396 mm
Aperture priority
Yes
Yes
Max. aperture
f3.5 - f4.8
f2.8 - f4.8
Metering
Centre weighted, Multi-pattern, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
16 sec
1/30 sec
Max. shutter speed
1/1250 sec
1/3200 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
5
4
Screen size
2.5"
2.5"
Screen resolution
230,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
SDHC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
2 x AA batteries (NiMH)
AA (2) batteries
Weight
220 g
375 g
Dimensions
107 x 72.4 x 35.7 mm
109 x 74 x 77 mm
Year
2009
2007
Choose cameras to compare
Popular comparisons:
- Kodak EasyShare Z915 vs. Kodak EasyShare ZD15
- Kodak EasyShare Z915 vs. Kodak EasyShare Z950
- Kodak EasyShare Z915 vs. Kodak EasyShare Z990
- Kodak EasyShare Z915 vs. Kodak PixPro FZ151
- Kodak EasyShare Z915 vs. Fujifilm FinePix S4300
- Kodak EasyShare Z915 vs. Kodak PixPro AZ361
- Kodak EasyShare Z915 vs. Sony Cyber-shot DSC-RX1
- Kodak EasyShare Z915 vs. Canon PowerShot SX110 IS
- Kodak EasyShare Z915 vs. Kodak PixPro FZ201
- Kodak EasyShare Z915 vs. Kodak PixPro AZ521
- Kodak EasyShare Z915 vs. Olympus SH-21
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Kodak Z915 diagonal
The diagonal of Z915 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Kodak Z1012 IS diagonal
The diagonal of Z1012 IS sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Z915 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Z1012 IS sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Z915 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.69 µm |
3647 |
Z1012 IS pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.67 µm |
3647 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Z915 pixel area
Pixel pitch = 1.69 µm
Pixel area = 1.69² = 2.86 µm²
Pixel area = 1.69² = 2.86 µm²
Z1012 IS pixel area
Pixel pitch = 1.67 µm
Pixel area = 1.67² = 2.79 µm²
Pixel area = 1.67² = 2.79 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Z915 pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.616 cm
Pixel density = (3647 / 0.616)² / 1000000 = 35.05 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3647 / 0.616)² / 1000000 = 35.05 MP/cm²
Z1012 IS pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.608 cm
Pixel density = (3647 / 0.608)² / 1000000 = 35.98 MP/cm²
Sensor width = 0.608 cm
Pixel density = (3647 / 0.608)² / 1000000 = 35.98 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Z915 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 4.62 mm
Effective megapixels = 10.00
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Z1012 IS sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 4.56 mm
Effective megapixels = 10.00
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Z915 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
Z1012 IS crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Z915 equivalent aperture
Crop factor = 5.62
Aperture = f3.5 - f4.8
35-mm equivalent aperture = (f3.5 - f4.8) × 5.62 = f19.7 - f27
Aperture = f3.5 - f4.8
35-mm equivalent aperture = (f3.5 - f4.8) × 5.62 = f19.7 - f27
Z1012 IS equivalent aperture
Crop factor = 5.69
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 5.69 = f15.9 - f27.3
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 5.69 = f15.9 - f27.3
More comparisons of Kodak Z915:
- Kodak EasyShare Z915 vs. Olympus SZ-14
- Kodak EasyShare Z915 vs. Kodak EasyShare C1530
- Kodak EasyShare Z915 vs. Kodak EasyShare Z981
- Kodak EasyShare Z915 vs. Olympus VR-370
- Kodak EasyShare Z915 vs. Kodak PixPro FZ51
- Kodak EasyShare Z915 vs. Kodak EasyShare Z1012 IS
- Kodak EasyShare Z915 vs. Canon Digital IXUS 95 IS
- Kodak EasyShare Z915 vs. Canon PowerShot A590 IS
- Kodak EasyShare Z915 vs. Fujifilm FinePix S5800
- Kodak EasyShare Z915 vs. Kodak EasyShare ZD710
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.