Olympus SP-620 UZ vs. Fujifilm FinePix S2800hd
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Olympus SP-620 UZ | Fujifilm FinePix S2800hd | ||||
| check price » | check price » | ||||
Megapixels
16.00
14.00
Max. image resolution
4608 x 3456
4288 x 3216
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Olympus SP-620 UZ | Fujifilm FinePix S2800hd | |
Surface area:
| 28.46 mm² | vs | 28.46 mm² |
Difference: 0 mm² (0%)
SP-620 UZ and S2800hd sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Olympus SP-620 UZ (2012) and Fujifilm S2800hd (2010).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.24 µm² (13%)
A pixel on Fujifilm S2800hd sensor is approx. 13% bigger than a pixel on Olympus SP-620 UZ.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Olympus SP-620 UZ
Fujifilm S2800hd
Total megapixels
16.60
Effective megapixels
16.00
14.00
Optical zoom
21x
18x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, High Auto, 100, 200, 400, 800, 1600, 3200
Auto, 64, 100, 200, 400, 800, 1600, 3200, 6400
RAW
Manual focus
Normal focus range
60 cm
40 cm
Macro focus range
1 cm
2 cm
Focal length (35mm equiv.)
25 - 525 mm
28 - 504 mm
Aperture priority
No
Yes
Max. aperture
f3.1 - f5.8
f3.1 - f5.6
Metering
Multi, Spot
Multi-segment, Spot, TTL 256-zones metering
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
4 sec
8 sec
Max. shutter speed
1/1500 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
5
6
Screen size
3"
3"
Screen resolution
230,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SD/SDHC/SDXC
SDHC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4 x AA batteries
4 x AA batteries (Alkaline, NiMH or Lithium)
Weight
226 g
437 g
Dimensions
110 x 74 x 74 mm
110.2 x 73.4 x 81.4 mm
Year
2012
2010
Choose cameras to compare
Popular comparisons:
- Olympus SP-620 UZ vs. Fujifilm FinePix S2980
- Olympus SP-620 UZ vs. Nikon Coolpix L310
- Olympus SP-620 UZ vs. Samsung WB100
- Olympus SP-620 UZ vs. Panasonic Lumix DMC-LZ20
- Olympus SP-620 UZ vs. Sony Cyber-shot DSC-H100
- Olympus SP-620 UZ vs. BenQ GH600
- Olympus SP-620 UZ vs. Canon PowerShot SX160 IS
- Olympus SP-620 UZ vs. Nikon Coolpix L810
- Olympus SP-620 UZ vs. Canon PowerShot SX500 IS
- Olympus SP-620 UZ vs. Fujifilm FinePix S2800hd
- Olympus SP-620 UZ vs. GE X500
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Olympus SP-620 UZ diagonal
The diagonal of SP-620 UZ sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Fujifilm S2800hd diagonal
The diagonal of S2800hd sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
SP-620 UZ sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
S2800hd sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
SP-620 UZ pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4612 pixels
Sensor resolution width = 4612 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.34 µm |
| 4612 |
S2800hd pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4315 pixels
Sensor resolution width = 4315 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.43 µm |
| 4315 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
SP-620 UZ pixel area
Pixel pitch = 1.34 µm
Pixel area = 1.34² = 1.8 µm²
Pixel area = 1.34² = 1.8 µm²
S2800hd pixel area
Pixel pitch = 1.43 µm
Pixel area = 1.43² = 2.04 µm²
Pixel area = 1.43² = 2.04 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
SP-620 UZ pixel density
Sensor resolution width = 4612 pixels
Sensor width = 0.616 cm
Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²
S2800hd pixel density
Sensor resolution width = 4315 pixels
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
SP-620 UZ sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.00
Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Sensor height = 4.62 mm
Effective megapixels = 16.00
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
S2800hd sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.00
Resolution horizontal: X × r = 3244 × 1.33 = 4315
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Sensor height = 4.62 mm
Effective megapixels = 14.00
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
SP-620 UZ crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
S2800hd crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
SP-620 UZ equivalent aperture
Crop factor = 5.62
Aperture = f3.1 - f5.8
35-mm equivalent aperture = (f3.1 - f5.8) × 5.62 = f17.4 - f32.6
Aperture = f3.1 - f5.8
35-mm equivalent aperture = (f3.1 - f5.8) × 5.62 = f17.4 - f32.6
S2800hd equivalent aperture
Crop factor = 5.62
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 5.62 = f17.4 - f31.5
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 5.62 = f17.4 - f31.5
More comparisons of Olympus SP-620 UZ:
- Olympus SP-620 UZ vs. Sony Cyber-shot DSC-W690
- Olympus SP-620 UZ vs. Olympus SZ-14
- Olympus SP-620 UZ vs. Nikon Coolpix L320
- Olympus SP-620 UZ vs. BenQ GH700
- Olympus SP-620 UZ vs. Canon PowerShot SX150 IS
- Olympus SP-620 UZ vs. Fujifilm FinePix S2950
- Olympus SP-620 UZ vs. Olympus SP 810 UZ
- Olympus SP-620 UZ vs. Sony Cyber-shot DSC-H200
- Olympus SP-620 UZ vs. Fujifilm FinePix S4500
- Olympus SP-620 UZ vs. Samsung WB150F
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.