AgfaPhoto DC-1030i vs. Olympus FE-45

Comparison

change cameras »
DC-1030i image
vs
FE-45 image
AgfaPhoto DC-1030i Olympus FE-45
check price » check price »
Megapixels
10.00
10.00
Max. image resolution
3648 x 2736
3648 x 2736

Sensor

Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor resolution
3647 x 2742
3647 x 2742
Diagonal
8.89 mm
7.60 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1.37 : 1
(ratio)
AgfaPhoto DC-1030i Olympus FE-45
Surface area:
37.90 mm² vs 27.72 mm²
Difference: 10.18 mm² (37%)
DC-1030i sensor is approx. 1.37x bigger than FE-45 sensor.
Note: You are comparing cameras of different generations. There is a 3 year gap between AgfaPhoto DC-1030i (2006) and Olympus FE-45 (2009). All things being equal, newer sensor generations generally outperform the older.
Pixel pitch
1.95 µm
1.67 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.28 µm (17%)
Pixel pitch of DC-1030i is approx. 17% higher than pixel pitch of FE-45.
Pixel area
3.8 µm²
2.79 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.01 µm² (36%)
A pixel on AgfaPhoto DC-1030i sensor is approx. 36% bigger than a pixel on Olympus FE-45.
Pixel density
26.31 MP/cm²
35.98 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 9.67 µm (37%)
Olympus FE-45 has approx. 37% higher pixel density than AgfaPhoto DC-1030i.
To learn about the accuracy of these numbers, click here.



Specs

AgfaPhoto DC-1030i
Olympus FE-45
Crop factor
4.87
5.69
Total megapixels
Effective megapixels
10.00
Optical zoom
Yes
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 100 - 1600
RAW
Manual focus
Normal focus range
80 cm
60 cm
Macro focus range
5 cm
5 cm
Focal length (35mm equiv.)
38 - 109 mm
36 - 108 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.1
f3.1 - f5.9
Max. aperture (35mm equiv.)
f13.6 - f24.8
f17.6 - f33.6
Metering
Centre weighted, Multi-segment, Spot
ESPi Digital
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
4 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
7
Screen size
2.5"
2.5"
Screen resolution
230,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
xD Picture card
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
2x AA
Li-ion Rechargeable Battery (LI-42B)
Weight
142 g
Dimensions
94 x 62 x 23 mm
Year
2006
2009




Choose cameras to compare

vs

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal = √  w² + h²
where w = sensor width and h = sensor height

AgfaPhoto DC-1030i diagonal

The diagonal of DC-1030i sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm
Diagonal = √  7.11² + 5.33²   = 8.89 mm

Olympus FE-45 diagonal

The diagonal of FE-45 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of that value - 7.6 mm. If you want to know why, see sensor sizes.

w = 6.08 mm
h = 4.56 mm
Diagonal = √  6.08² + 4.56²   = 7.60 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

DC-1030i sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²

FE-45 sensor area

Width = 6.08 mm
Height = 4.56 mm

Surface area = 6.08 × 4.56 = 27.72 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

DC-1030i pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 3647 pixels
Pixel pitch =   7.11  × 1000  = 1.95 µm
3647

FE-45 pixel pitch

Sensor width = 6.08 mm
Sensor resolution width = 3647 pixels
Pixel pitch =   6.08  × 1000  = 1.67 µm
3647


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

DC-1030i pixel area

Pixel pitch = 1.95 µm

Pixel area = 1.95² = 3.8 µm²

FE-45 pixel area

Pixel pitch = 1.67 µm

Pixel area = 1.67² = 2.79 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

DC-1030i pixel density

Sensor resolution width = 3647 pixels
Sensor width = 0.711 cm

Pixel density = (3647 / 0.711)² / 1000000 = 26.31 MP/cm²

FE-45 pixel density

Sensor resolution width = 3647 pixels
Sensor width = 0.608 cm

Pixel density = (3647 / 0.608)² / 1000000 = 35.98 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X = √  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

DC-1030i sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 10.00
r = 7.11/5.33 = 1.33
X = √  10.00 × 1000000  = 2742
1.33
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742

Sensor resolution = 3647 x 2742

FE-45 sensor resolution

Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 10.00
r = 6.08/4.56 = 1.33
X = √  10.00 × 1000000  = 2742
1.33
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742

Sensor resolution = 3647 x 2742


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


DC-1030i crop factor

Sensor diagonal in mm = 8.89 mm
Crop factor =   43.27  = 4.87
8.89

FE-45 crop factor

Sensor diagonal in mm = 7.60 mm
Crop factor =   43.27  = 5.69
7.60

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

DC-1030i equivalent aperture

Crop factor = 4.87
Aperture = f2.8 - f5.1

35-mm equivalent aperture = (f2.8 - f5.1) × 4.87 = f13.6 - f24.8

FE-45 equivalent aperture

Crop factor = 5.69
Aperture = f3.1 - f5.9

35-mm equivalent aperture = (f3.1 - f5.9) × 5.69 = f17.6 - f33.6

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.