BenQ AE100 vs. Casio QV-300
Comparison
change cameras » | |||||
|
vs |
|
|||
BenQ AE100 | Casio QV-300 | ||||
check price » | check price » |
Megapixels
14.00
0.30
Max. image resolution
4320 x 3240
640 x 480
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/3" (~ 4.8 x 3.6 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.65 | : | 1 |
(ratio) | ||
BenQ AE100 | Casio QV-300 |
Surface area:
28.46 mm² | vs | 17.28 mm² |
Difference: 11.18 mm² (65%)
AE100 sensor is approx. 1.65x bigger than QV-300 sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 15 years between BenQ AE100 (2011) and
Casio QV-300 (1996).
Fifteen years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 55.57 µm² (2724%)
A pixel on Casio QV-300 sensor is approx. 2724% bigger than a pixel on BenQ AE100.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
BenQ AE100
Casio QV-300
Total megapixels
0.40
Effective megapixels
0.30
Optical zoom
Yes
2.3x
Digital zoom
Yes
No
ISO sensitivity
Auto, 100 - 3200
120
RAW
Manual focus
Normal focus range
60 cm
Macro focus range
5 cm
9 cm
Focal length (35mm equiv.)
47 - 106 mm
Aperture priority
No
Max. aperture
f2.4
f2.6 - f8.0
Metering
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/4 EV steps)
Shutter priority
No
Min. shutter speed
1/8 sec
Max. shutter speed
1/4000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
3
Screen size
2.7"
2.5"
Screen resolution
230,000 dots
61,380 dots
Video capture
Max. video resolution
Storage types
SDHC, SDXC, Secure Digital
Internal
USB
USB 2.0 (480 Mbit/sec)
USB 1.0
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
Weight
110 g
290 g
Dimensions
98.1 x 18.5 x 57.9 mm
162 x 72 x 49 mm
Year
2011
1996
Choose cameras to compare
Popular comparisons:
- BenQ AE100 vs. Canon PowerShot A810
- BenQ AE100 vs. BenQ AC100
- BenQ AE100 vs. Samsung D860
- BenQ AE100 vs. Sony Cyber-shot DSC-W610
- BenQ AE100 vs. Nikon Coolpix P330
- BenQ AE100 vs. Nikon Coolpix S3100
- BenQ AE100 vs. Concord 1500
- BenQ AE100 vs. Nikon Coolpix S3000
- BenQ AE100 vs. Kodak EasyShare C182
- BenQ AE100 vs. Casio Exilim EX-Z75
- BenQ AE100 vs. Samsung S760
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
BenQ AE100 diagonal
The diagonal of AE100 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Casio QV-300 diagonal
The diagonal of QV-300 sensor is not 1/3 or 0.33" (8.5 mm) as you might expect, but approximately two thirds of
that value - 6 mm. If you want to know why, see
sensor sizes.
w = 4.80 mm
h = 3.60 mm
w = 4.80 mm
h = 3.60 mm
Diagonal = √ | 4.80² + 3.60² | = 6.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
AE100 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
QV-300 sensor area
Width = 4.80 mm
Height = 3.60 mm
Surface area = 4.80 × 3.60 = 17.28 mm²
Height = 3.60 mm
Surface area = 4.80 × 3.60 = 17.28 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
AE100 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4315 pixels
Sensor resolution width = 4315 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.43 µm |
4315 |
QV-300 pixel pitch
Sensor width = 4.80 mm
Sensor resolution width = 632 pixels
Sensor resolution width = 632 pixels
Pixel pitch = | 4.80 | × 1000 | = 7.59 µm |
632 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
AE100 pixel area
Pixel pitch = 1.43 µm
Pixel area = 1.43² = 2.04 µm²
Pixel area = 1.43² = 2.04 µm²
QV-300 pixel area
Pixel pitch = 7.59 µm
Pixel area = 7.59² = 57.61 µm²
Pixel area = 7.59² = 57.61 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
AE100 pixel density
Sensor resolution width = 4315 pixels
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
QV-300 pixel density
Sensor resolution width = 632 pixels
Sensor width = 0.48 cm
Pixel density = (632 / 0.48)² / 1000000 = 1.73 MP/cm²
Sensor width = 0.48 cm
Pixel density = (632 / 0.48)² / 1000000 = 1.73 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
AE100 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.00
Resolution horizontal: X × r = 3244 × 1.33 = 4315
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Sensor height = 4.62 mm
Effective megapixels = 14.00
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
QV-300 sensor resolution
Sensor width = 4.80 mm
Sensor height = 3.60 mm
Effective megapixels = 0.30
Resolution horizontal: X × r = 475 × 1.33 = 632
Resolution vertical: X = 475
Sensor resolution = 632 x 475
Sensor height = 3.60 mm
Effective megapixels = 0.30
r = 4.80/3.60 = 1.33 |
|
Resolution vertical: X = 475
Sensor resolution = 632 x 475
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
AE100 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
QV-300 crop factor
Sensor diagonal in mm = 6.00 mm
Crop factor = | 43.27 | = 7.21 |
6.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
AE100 equivalent aperture
Crop factor = 5.62
Aperture = f2.4
35-mm equivalent aperture = (f2.4) × 5.62 = f13.5
Aperture = f2.4
35-mm equivalent aperture = (f2.4) × 5.62 = f13.5
QV-300 equivalent aperture
Crop factor = 7.21
Aperture = f2.6 - f8.0
35-mm equivalent aperture = (f2.6 - f8.0) × 7.21 = f18.7 - f57.7
Aperture = f2.6 - f8.0
35-mm equivalent aperture = (f2.6 - f8.0) × 7.21 = f18.7 - f57.7
More comparisons of BenQ AE100:
- BenQ AE100 vs. Nikon Coolpix L26
- BenQ AE100 vs. Olympus T-100
- BenQ AE100 vs. Sony Cyber-shot DSC-WX7
- BenQ AE100 vs. Panasonic Lumix DMC-SZ1
- BenQ AE100 vs. Praktica Luxmedia 16-Z51
- BenQ AE100 vs. Nikon Coolpix L28
- BenQ AE100 vs. Nikon Coolpix S2500
- BenQ AE100 vs. Praktica Luxmedia 12-Z4
- BenQ AE100 vs. Casio QV-300
- BenQ AE100 vs. Casio Exilim EX-N50
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.