Canon EOS 7D Mark II vs. Sony Alpha a6000
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon EOS 7D Mark II | Sony Alpha a6000 | ||||
check price » | check price » |
Megapixels
20.20
24.30
Max. image resolution
5472 x 3648
6000 x 4000
Sensor
Sensor type
CMOS
CMOS
Sensor size
22.4 x 15 mm
23.5 x 15.6 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.09 |
(ratio) | ||
Canon EOS 7D Mark II | Sony Alpha a6000 |
Surface area:
336.00 mm² | vs | 366.60 mm² |
Difference: 30.6 mm² (9%)
Alpha a6000 sensor is approx. 1.09x bigger than 7D Mark II sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.6 µm² (11%)
A pixel on Canon 7D Mark II sensor is approx. 11% bigger than a pixel on Sony Alpha a6000.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon 7D Mark II
Sony Alpha a6000
Total megapixels
20.90
24.70
Effective megapixels
20.20
24.30
Optical zoom
Digital zoom
Yes
ISO sensitivity
Auto, 100-16000 (expandable to 51200)
Auto, 100-25600
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Evaluative, Partial, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±5 EV (in 1/3 EV, 1/2 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/8000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (pentaprism)
Electronic
White balance presets
8
10
Screen size
3"
3"
Screen resolution
1,040,000 dots
921,600 dots
Video capture
Max. video resolution
1920x1080 (60p/50p/30p/25p/24p)
1920x1080 (60p/60i/24p)
Storage types
SD/SDHC/SDXC/Type I CompactFlash
SD/SDHC/SDXC, Memory Stick Duo/Pro Duo/Pro-HG Duo
USB
USB 3.0 (5 GBit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Battery Pack LP-E6N (or LP-E6)
NP-FW50 lithium-ion battery
Weight
910 g
344 g
Dimensions
148.6 x 112.4 x 78.2 mm
120 x 67 x 45 mm
Year
2014
2014
Choose cameras to compare
Popular comparisons:
- Canon EOS 7D Mark II vs. Canon EOS 80D
- Canon EOS 7D Mark II vs. Canon EOS 1300D
- Canon EOS 7D Mark II vs. Canon EOS 5D Mark IV
- Canon EOS 7D Mark II vs. Canon EOS 6D
- Canon EOS 7D Mark II vs. Canon EOS 5D Mark III
- Canon EOS 7D Mark II vs. Canon EOS 6D Mark II
- Canon EOS 7D Mark II vs. Canon EOS 7D
- Canon EOS 7D Mark II vs. Canon EOS 70D
- Canon EOS 7D Mark II vs. Nikon D7100
- Canon EOS 7D Mark II vs. Nikon D750
- Canon EOS 7D Mark II vs. Olympus OM-D E-M1
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon 7D Mark II diagonal
w = 22.40 mm
h = 15.00 mm
h = 15.00 mm
Diagonal = √ | 22.40² + 15.00² | = 26.96 mm |
Sony Alpha a6000 diagonal
w = 23.50 mm
h = 15.60 mm
h = 15.60 mm
Diagonal = √ | 23.50² + 15.60² | = 28.21 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
7D Mark II sensor area
Width = 22.40 mm
Height = 15.00 mm
Surface area = 22.40 × 15.00 = 336.00 mm²
Height = 15.00 mm
Surface area = 22.40 × 15.00 = 336.00 mm²
Alpha a6000 sensor area
Width = 23.50 mm
Height = 15.60 mm
Surface area = 23.50 × 15.60 = 366.60 mm²
Height = 15.60 mm
Surface area = 23.50 × 15.60 = 366.60 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
7D Mark II pixel pitch
Sensor width = 22.40 mm
Sensor resolution width = 5486 pixels
Sensor resolution width = 5486 pixels
Pixel pitch = | 22.40 | × 1000 | = 4.08 µm |
5486 |
Alpha a6000 pixel pitch
Sensor width = 23.50 mm
Sensor resolution width = 6058 pixels
Sensor resolution width = 6058 pixels
Pixel pitch = | 23.50 | × 1000 | = 3.88 µm |
6058 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
7D Mark II pixel area
Pixel pitch = 4.08 µm
Pixel area = 4.08² = 16.65 µm²
Pixel area = 4.08² = 16.65 µm²
Alpha a6000 pixel area
Pixel pitch = 3.88 µm
Pixel area = 3.88² = 15.05 µm²
Pixel area = 3.88² = 15.05 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
7D Mark II pixel density
Sensor resolution width = 5486 pixels
Sensor width = 2.24 cm
Pixel density = (5486 / 2.24)² / 1000000 = 6 MP/cm²
Sensor width = 2.24 cm
Pixel density = (5486 / 2.24)² / 1000000 = 6 MP/cm²
Alpha a6000 pixel density
Sensor resolution width = 6058 pixels
Sensor width = 2.35 cm
Pixel density = (6058 / 2.35)² / 1000000 = 6.65 MP/cm²
Sensor width = 2.35 cm
Pixel density = (6058 / 2.35)² / 1000000 = 6.65 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
7D Mark II sensor resolution
Sensor width = 22.40 mm
Sensor height = 15.00 mm
Effective megapixels = 20.20
Resolution horizontal: X × r = 3682 × 1.49 = 5486
Resolution vertical: X = 3682
Sensor resolution = 5486 x 3682
Sensor height = 15.00 mm
Effective megapixels = 20.20
r = 22.40/15.00 = 1.49 |
|
Resolution vertical: X = 3682
Sensor resolution = 5486 x 3682
Alpha a6000 sensor resolution
Sensor width = 23.50 mm
Sensor height = 15.60 mm
Effective megapixels = 24.30
Resolution horizontal: X × r = 4012 × 1.51 = 6058
Resolution vertical: X = 4012
Sensor resolution = 6058 x 4012
Sensor height = 15.60 mm
Effective megapixels = 24.30
r = 23.50/15.60 = 1.51 |
|
Resolution vertical: X = 4012
Sensor resolution = 6058 x 4012
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
7D Mark II crop factor
Sensor diagonal in mm = 26.96 mm
Crop factor = | 43.27 | = 1.6 |
26.96 |
Alpha a6000 crop factor
Sensor diagonal in mm = 28.21 mm
Crop factor = | 43.27 | = 1.53 |
28.21 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
7D Mark II equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 7D Mark II, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 7D Mark II is 1.6
Crop factor for Canon 7D Mark II is 1.6
Alpha a6000 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sony Alpha a6000, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Sony Alpha a6000 is 1.53
Crop factor for Sony Alpha a6000 is 1.53
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.