Canon IXUS 130 vs. Panasonic Lumix DMC-ZS3
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon IXUS 130 | Panasonic Lumix DMC-ZS3 | ||||
check price » | check price » |
Megapixels
14.10
10.10
Max. image resolution
4320 x 3240
3648 x 2736
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.03 | : | 1 |
(ratio) | ||
Canon IXUS 130 | Panasonic Lumix DMC-ZS3 |
Surface area:
28.46 mm² | vs | 27.72 mm² |
Difference: 0.74 mm² (3%)
IXUS 130 sensor is slightly bigger than ZS3 sensor (only 3% difference).
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.74 µm² (37%)
A pixel on Panasonic ZS3 sensor is approx. 37% bigger than a pixel on Canon IXUS 130.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon IXUS 130
Panasonic ZS3
Total megapixels
14.50
12.70
Effective megapixels
14.10
10.10
Optical zoom
4x
12x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400, 800, 1600
Auto, 80, 100, 200, 400, 800, 1600 - 6400
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
3 cm
3 cm
Focal length (35mm equiv.)
28 - 112 mm
25 - 300 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.9
f3.3 - f4.9
Metering
Centre weighted, Evaluative, Spot
Intelligent Multiple
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
15 sec
60 sec
Max. shutter speed
1/1500 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
5
5
Screen size
2.7"
3"
Screen resolution
230,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
SDHC, SDXC, Secure Digital
MultiMedia, SDHC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-4L battery
Lithium-Ion rechargeable battery
Weight
133 g
229 g
Dimensions
92.2 x 56.1 x 17.8 mm
103.3 x 59.6 x 32.8 mm
Year
2010
2009
Choose cameras to compare
Popular comparisons:
- Canon IXUS 130 vs. Canon IXUS 132
- Canon IXUS 130 vs. Canon IXUS 115 HS
- Canon IXUS 130 vs. Canon IXUS 220 HS
- Canon IXUS 130 vs. Canon IXUS 125 HS
- Canon IXUS 130 vs. Canon EOS 6D
- Canon IXUS 130 vs. Sony Cyber-shot DSC-WX50
- Canon IXUS 130 vs. Sony Cyber-shot DSC-RX100
- Canon IXUS 130 vs. Canon PowerShot SX230 HS
- Canon IXUS 130 vs. Canon IXUS 285 HS
- Canon IXUS 130 vs. Canon PowerShot A3400 IS
- Canon IXUS 130 vs. Canon PowerShot SX240 HS
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon IXUS 130 diagonal
The diagonal of IXUS 130 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Panasonic ZS3 diagonal
The diagonal of ZS3 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
IXUS 130 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
ZS3 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
IXUS 130 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4330 pixels
Sensor resolution width = 4330 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.42 µm |
4330 |
ZS3 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 3665 pixels
Sensor resolution width = 3665 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.66 µm |
3665 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
IXUS 130 pixel area
Pixel pitch = 1.42 µm
Pixel area = 1.42² = 2.02 µm²
Pixel area = 1.42² = 2.02 µm²
ZS3 pixel area
Pixel pitch = 1.66 µm
Pixel area = 1.66² = 2.76 µm²
Pixel area = 1.66² = 2.76 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
IXUS 130 pixel density
Sensor resolution width = 4330 pixels
Sensor width = 0.616 cm
Pixel density = (4330 / 0.616)² / 1000000 = 49.41 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4330 / 0.616)² / 1000000 = 49.41 MP/cm²
ZS3 pixel density
Sensor resolution width = 3665 pixels
Sensor width = 0.608 cm
Pixel density = (3665 / 0.608)² / 1000000 = 36.34 MP/cm²
Sensor width = 0.608 cm
Pixel density = (3665 / 0.608)² / 1000000 = 36.34 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
IXUS 130 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.10
Resolution horizontal: X × r = 3256 × 1.33 = 4330
Resolution vertical: X = 3256
Sensor resolution = 4330 x 3256
Sensor height = 4.62 mm
Effective megapixels = 14.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3256
Sensor resolution = 4330 x 3256
ZS3 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 10.10
Resolution horizontal: X × r = 2756 × 1.33 = 3665
Resolution vertical: X = 2756
Sensor resolution = 3665 x 2756
Sensor height = 4.56 mm
Effective megapixels = 10.10
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 2756
Sensor resolution = 3665 x 2756
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
IXUS 130 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
ZS3 crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
IXUS 130 equivalent aperture
Crop factor = 5.62
Aperture = f2.8 - f5.9
35-mm equivalent aperture = (f2.8 - f5.9) × 5.62 = f15.7 - f33.2
Aperture = f2.8 - f5.9
35-mm equivalent aperture = (f2.8 - f5.9) × 5.62 = f15.7 - f33.2
ZS3 equivalent aperture
Crop factor = 5.69
Aperture = f3.3 - f4.9
35-mm equivalent aperture = (f3.3 - f4.9) × 5.69 = f18.8 - f27.9
Aperture = f3.3 - f4.9
35-mm equivalent aperture = (f3.3 - f4.9) × 5.69 = f18.8 - f27.9
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.