Canon IXY DIGITAL 40 vs. Epson PhotoPC 750 Zoom
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Canon IXY DIGITAL 40 | Epson PhotoPC 750 Zoom | ||||
| check price » | check price » | ||||
Megapixels
3.20
1.20
Max. image resolution
2048 x 1536
1280 x 960
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2" (~ 6.4 x 4.8 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.24 |
| (ratio) | ||
| Canon IXY DIGITAL 40 | Epson PhotoPC 750 Zoom | |
Surface area:
| 24.84 mm² | vs | 30.72 mm² |
Difference: 5.88 mm² (24%)
750 Zoom sensor is approx. 1.24x bigger than IXY DIGITAL 40 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 6 years between Canon IXY DIGITAL 40 (2004) and Epson 750 Zoom (1998).
Six years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 17.82 µm² (229%)
A pixel on Epson 750 Zoom sensor is approx. 229% bigger than a pixel on Canon IXY DIGITAL 40.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon IXY DIGITAL 40
Epson 750 Zoom
Total megapixels
3.30
Effective megapixels
3.20
Optical zoom
3x
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
90, 180, 360
RAW
Manual focus
Normal focus range
50 cm
80 cm
Macro focus range
3 cm
20 cm
Focal length (35mm equiv.)
35 - 105 mm
34 - 102 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.9
f2.8 - f8.0
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/2 EV steps)
Shutter priority
No
No
Min. shutter speed
15 sec
1/4 sec
Max. shutter speed
1/1500 sec
1/750 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
5
3
Screen size
2"
2"
Screen resolution
118,000 dots
110,000 dots
Video capture
Max. video resolution
Storage types
SD card
Compact Flash, Internal 4MB
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-4L battery
AA NiMH (4) batteries (supplied)
Weight
135 g
280 g
Dimensions
86 x 54 x 21 mm
113 x 68 x 36 mm
Year
2004
1998
Choose cameras to compare
Popular comparisons:
- Canon IXY DIGITAL 40 vs. Sony Alpha DSLR-A700
- Canon IXY DIGITAL 40 vs. Sony Cyber-shot DSC-RX100
- Canon IXY DIGITAL 40 vs. Sony Mavica CD350
- Canon IXY DIGITAL 40 vs. Panasonic Lumix DMC-TZ20
- Canon IXY DIGITAL 40 vs. Canon Digital IXUS 80 IS
- Canon IXY DIGITAL 40 vs. Canon IXY DIGITAL 70
- Canon IXY DIGITAL 40 vs. Canon PowerShot ELPH 100 HS
- Canon IXY DIGITAL 40 vs. Canon IXY DIGITAL 20 IS
- Canon IXY DIGITAL 40 vs. Canon IXY DIGITAL 50
- Canon IXY DIGITAL 40 vs. Epson PhotoPC L-500V
- Canon IXY DIGITAL 40 vs. Epson PhotoPC 750 Zoom
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Canon IXY DIGITAL 40 diagonal
The diagonal of IXY DIGITAL 40 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Epson 750 Zoom diagonal
The diagonal of 750 Zoom sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
IXY DIGITAL 40 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
750 Zoom sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
IXY DIGITAL 40 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2063 pixels
Sensor resolution width = 2063 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.79 µm |
| 2063 |
750 Zoom pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1264 pixels
Sensor resolution width = 1264 pixels
| Pixel pitch = | 6.40 | × 1000 | = 5.06 µm |
| 1264 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
IXY DIGITAL 40 pixel area
Pixel pitch = 2.79 µm
Pixel area = 2.79² = 7.78 µm²
Pixel area = 2.79² = 7.78 µm²
750 Zoom pixel area
Pixel pitch = 5.06 µm
Pixel area = 5.06² = 25.6 µm²
Pixel area = 5.06² = 25.6 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
IXY DIGITAL 40 pixel density
Sensor resolution width = 2063 pixels
Sensor width = 0.575 cm
Pixel density = (2063 / 0.575)² / 1000000 = 12.87 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2063 / 0.575)² / 1000000 = 12.87 MP/cm²
750 Zoom pixel density
Sensor resolution width = 1264 pixels
Sensor width = 0.64 cm
Pixel density = (1264 / 0.64)² / 1000000 = 3.9 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1264 / 0.64)² / 1000000 = 3.9 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
IXY DIGITAL 40 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 3.20
Resolution horizontal: X × r = 1551 × 1.33 = 2063
Resolution vertical: X = 1551
Sensor resolution = 2063 x 1551
Sensor height = 4.32 mm
Effective megapixels = 3.20
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1551
Sensor resolution = 2063 x 1551
750 Zoom sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.20
Resolution horizontal: X × r = 950 × 1.33 = 1264
Resolution vertical: X = 950
Sensor resolution = 1264 x 950
Sensor height = 4.80 mm
Effective megapixels = 1.20
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 950
Sensor resolution = 1264 x 950
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
IXY DIGITAL 40 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
750 Zoom crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
IXY DIGITAL 40 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
750 Zoom equivalent aperture
Crop factor = 5.41
Aperture = f2.8 - f8.0
35-mm equivalent aperture = (f2.8 - f8.0) × 5.41 = f15.1 - f43.3
Aperture = f2.8 - f8.0
35-mm equivalent aperture = (f2.8 - f8.0) × 5.41 = f15.1 - f43.3
More comparisons of Canon IXY DIGITAL 40:
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.