Canon PowerShot A400 vs. Canon PowerShot A580

Comparison

change cameras »
PowerShot A400 image
vs
PowerShot A580 image
Canon PowerShot A400 Canon PowerShot A580
check price » check price »
Megapixels
3.10
8.00
Max. image resolution
2048 x 1536
3264 x 2448

Sensor

Sensor type
CCD
CCD
Sensor size
1/3.2" (~ 4.5 x 3.37 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor resolution
2038 x 1521
3262 x 2453
Diagonal
5.62 mm
7.19 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1.64
(ratio)
Canon PowerShot A400 Canon PowerShot A580
Surface area:
15.17 mm² vs 24.84 mm²
Difference: 9.67 mm² (64%)
A580 sensor is approx. 1.64x bigger than A400 sensor.
Note: You are comparing cameras of different generations. There is a 4 year gap between Canon A400 (2004) and Canon A580 (2008). All things being equal, newer sensor generations generally outperform the older.
Pixel pitch
2.21 µm
1.76 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.45 µm (26%)
Pixel pitch of A400 is approx. 26% higher than pixel pitch of A580.
Pixel area
4.88 µm²
3.1 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.78 µm² (57%)
A pixel on Canon A400 sensor is approx. 57% bigger than a pixel on Canon A580.
Pixel density
20.51 MP/cm²
32.18 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 11.67 µm (57%)
Canon A580 has approx. 57% higher pixel density than Canon A400.
To learn about the accuracy of these numbers, click here.



Specs

Canon A400
Canon A580
Crop factor
7.7
6.02
Total megapixels
3.30
8.20
Effective megapixels
3.10
8.00
Optical zoom
2.2x
4x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
50 cm
40 cm
Macro focus range
5 cm
5 cm
Focal length (35mm equiv.)
45 - 100 mm
35 - 140 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.9
f2.6 - f5.5
Max. aperture (35mm equiv.)
f21.6 - f37.7
f15.7 - f33.1
Metering
Multi, Center-weighted, Spot
Centre weighted, Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1 sec
15 sec
Max. shutter speed
1/1500 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
5
6
Screen size
1.5"
2.5"
Screen resolution
115,000 dots
115,000 dots
Video capture
Max. video resolution
Storage types
SD/MMC card
SDHC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (2) batteries (NiMH recommended)
AA (2) batteries (NiMH recommended)
Weight
255 g
175 g
Dimensions
107 x 53 x 37 mm
94.3 x 64.7 x 40.8 mm
Year
2004
2008




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Canon A400 diagonal

The diagonal of A400 sensor is not 1/3.2 or 0.31" (7.9 mm) as you might expect, but approximately two thirds of that value - 5.62 mm. If you want to know why, see sensor sizes.

w = 4.50 mm
h = 3.37 mm
Diagonal =  4.50² + 3.37²   = 5.62 mm

Canon A580 diagonal

The diagonal of A580 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 7.19 mm. If you want to know why, see sensor sizes.

w = 5.75 mm
h = 4.32 mm
Diagonal =  5.75² + 4.32²   = 7.19 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

A400 sensor area

Width = 4.50 mm
Height = 3.37 mm

Surface area = 4.50 × 3.37 = 15.17 mm²

A580 sensor area

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

A400 pixel pitch

Sensor width = 4.50 mm
Sensor resolution width = 2038 pixels
Pixel pitch =   4.50  × 1000  = 2.21 µm
2038

A580 pixel pitch

Sensor width = 5.75 mm
Sensor resolution width = 3262 pixels
Pixel pitch =   5.75  × 1000  = 1.76 µm
3262


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

A400 pixel area

Pixel pitch = 2.21 µm

Pixel area = 2.21² = 4.88 µm²

A580 pixel area

Pixel pitch = 1.76 µm

Pixel area = 1.76² = 3.1 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

A400 pixel density

Sensor resolution width = 2038 pixels
Sensor width = 0.45 cm

Pixel density = (2038 / 0.45)² / 1000000 = 20.51 MP/cm²

A580 pixel density

Sensor resolution width = 3262 pixels
Sensor width = 0.575 cm

Pixel density = (3262 / 0.575)² / 1000000 = 32.18 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

A400 sensor resolution

Sensor width = 4.50 mm
Sensor height = 3.37 mm
Effective megapixels = 3.10
r = 4.50/3.37 = 1.34
X =  3.10 × 1000000  = 1521
1.34
Resolution horizontal: X × r = 1521 × 1.34 = 2038
Resolution vertical: X = 1521

Sensor resolution = 2038 x 1521

A580 sensor resolution

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 8.00
r = 5.75/4.32 = 1.33
X =  8.00 × 1000000  = 2453
1.33
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453

Sensor resolution = 3262 x 2453


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


A400 crop factor

Sensor diagonal in mm = 5.62 mm
Crop factor =   43.27  = 7.7
5.62

A580 crop factor

Sensor diagonal in mm = 7.19 mm
Crop factor =   43.27  = 6.02
7.19

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

A400 equivalent aperture

Crop factor = 7.7
Aperture = f2.8 - f4.9

35-mm equivalent aperture = (f2.8 - f4.9) × 7.7 = f21.6 - f37.7

A580 equivalent aperture

Crop factor = 6.02
Aperture = f2.6 - f5.5

35-mm equivalent aperture = (f2.6 - f5.5) × 6.02 = f15.7 - f33.1

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.