Canon PowerShot SX160 IS vs. Nikon Coolpix L110

Comparison

change cameras »

Canon PowerShot SX160 IS

Nikon Coolpix L110

check price »

Megapixels

16.00

12.20

Max. image resolution

4608 x 3456

4000 x 3000

Sensor

Sensor type

CCD

Sensor size

1/2.3" (~ 6.16 x 4.62 mm)

Sensor resolution

4612 x 3468

4029 x 3029

Diagonal

7.70 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	1
(ratio)

Canon PowerShot SX160 IS		Nikon Coolpix L110

Surface area:

28.46 mm²

Difference: 0 mm² (0%)

SX160 IS and L110 sensors are the same size.

Note: You are comparing cameras of different generations. There is a 2 year gap between Canon SX160 IS (2012) and Nikon L110 (2010). All things being equal, newer sensor generations generally outperform the older.

Pixel pitch

1.34 µm

1.53 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0.19 µm (14%)

Pixel pitch of L110 is approx. 14% higher than pixel pitch of SX160 IS.

Pixel area

1.8 µm²

2.34 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 0.54 µm² (30%)

A pixel on Nikon L110 sensor is approx. 30% bigger than a pixel on Canon SX160 IS.

Pixel density

56.06 MP/cm²

42.78 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 13.28 µm (31%)

Canon SX160 IS has approx. 31% higher pixel density than Nikon L110.

To learn about the accuracy of these numbers, click here.

Specs

Canon SX160 IS

Nikon L110

Crop factor

5.62

Total megapixels

16.60

12.40

Effective megapixels

16.00

12.20

Optical zoom

16x

15x

Digital zoom

Yes

ISO sensitivity

Auto, 80 ,100, 200, 400, 800, 1600

Auto

RAW

Manual focus

Normal focus range

60 cm

Macro focus range

1 cm

Focal length (35mm equiv.)

28 - 448 mm

28 - 420 mm

Aperture priority

Yes

Max. aperture

f3.5 - f5.9

f3.5 - f5.4

Max. aperture (35mm equiv.)

f19.7 - f33.2

f19.7 - f30.3

Metering

Multi, Center-weighted, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

15 sec

8 sec

Max. shutter speed

1/3200 sec

1/2000 sec

Built-in flash

External flash

Viewfinder

None

White balance presets

Screen size

Screen resolution

230,000 dots

Video capture

Max. video resolution

Storage types

SD/SDHC/SDXC

SDHC, Secure Digital

USB

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

2 x AA batteries

4 x AA batteries (Alkaline, NiMH, or Lithium)

Weight

291 g

406 g

Dimensions

111 x 73 x 44 mm

109 x 74 x 78 mm

Year

2012

2010

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Canon SX160 IS diagonal

The diagonal of SX160 IS sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm

Diagonal = √

6.16² + 4.62²

= 7.70 mm

Nikon L110 diagonal

The diagonal of L110 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm

Diagonal = √

6.16² + 4.62²

= 7.70 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

SX160 IS sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²

L110 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

SX160 IS pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 4612 pixels

Pixel pitch =	6.16	× 1000	= 1.34 µm
	4612

L110 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 4029 pixels

Pixel pitch =	6.16	× 1000	= 1.53 µm
	4029

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

SX160 IS pixel area

Pixel pitch = 1.34 µm

Pixel area = 1.34² = 1.8 µm²

L110 pixel area

Pixel pitch = 1.53 µm

Pixel area = 1.53² = 2.34 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

SX160 IS pixel density

Sensor resolution width = 4612 pixels
Sensor width = 0.616 cm

Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²

L110 pixel density

Sensor resolution width = 4029 pixels
Sensor width = 0.616 cm

Pixel density = (4029 / 0.616)² / 1000000 = 42.78 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

SX160 IS sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.00

r = 6.16/4.62 = 1.33

X = √	16.00 × 1000000	= 3468
	1.33

Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468

Sensor resolution = 4612 x 3468

L110 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.20

r = 6.16/4.62 = 1.33

X = √	12.20 × 1000000	= 3029
	1.33

Resolution horizontal: X × r = 3029 × 1.33 = 4029
Resolution vertical: X = 3029

Sensor resolution = 4029 x 3029

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

SX160 IS crop factor

Sensor diagonal in mm = 7.70 mm

Crop factor =	43.27	= 5.62
	7.70

L110 crop factor

Sensor diagonal in mm = 7.70 mm

Crop factor =	43.27	= 5.62
	7.70

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

SX160 IS equivalent aperture

Crop factor = 5.62
Aperture = f3.5 - f5.9

35-mm equivalent aperture = (f3.5 - f5.9) × 5.62 = f19.7 - f33.2

L110 equivalent aperture

Crop factor = 5.62
Aperture = f3.5 - f5.4

35-mm equivalent aperture = (f3.5 - f5.4) × 5.62 = f19.7 - f30.3

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.