Canon PowerShot SX50 HS vs. Canon EOS 350D

Comparison

change cameras »

Canon PowerShot SX50 HS

Canon EOS 350D

check price »

Megapixels

12.10

8.00

Max. image resolution

4000 x 3000

3456 x 2304

Sensor

Sensor type

CMOS

Sensor size

1/2.3" (~ 6.16 x 4.62 mm)

22.2 x 14.8 mm

Sensor resolution

4011 x 3016

3464 x 2309

Diagonal

7.70 mm

26.68 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	11.54
(ratio)

Canon PowerShot SX50 HS		Canon EOS 350D

Surface area:

28.46 mm²

328.56 mm²

Difference: 300.1 mm² (1054%)

350D sensor is approx. 11.54x bigger than SX50 HS sensor.

Note: You are comparing sensors of very different generations. There is a gap of 7 years between Canon SX50 HS (2012) and Canon 350D (2005). Seven years is a lot of time in terms of technology, meaning newer sensors are overall much more efficient than the older ones.

Pixel pitch

1.54 µm

6.41 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 4.87 µm (316%)

Pixel pitch of 350D is approx. 316% higher than pixel pitch of SX50 HS.

Pixel area

2.37 µm²

41.09 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 38.72 µm² (1634%)

A pixel on Canon 350D sensor is approx. 1634% bigger than a pixel on Canon SX50 HS.

Pixel density

42.4 MP/cm²

2.43 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 39.97 µm (1645%)

Canon SX50 HS has approx. 1645% higher pixel density than Canon 350D.

To learn about the accuracy of these numbers, click here.

Specs

Canon SX50 HS

Canon 350D

Crop factor

5.62

1.62

Total megapixels

12.80

8.20

Effective megapixels

12.10

8.00

Optical zoom

50x

Digital zoom

Yes

ISO sensitivity

Auto, 80 - 6400

Auto, 100, 200, 400, 800, 1600

RAW

Manual focus

Normal focus range

5 cm

Macro focus range

Focal length (35mm equiv.)

24 - 1200 mm

Aperture priority

Yes

Max. aperture

f3.4 - f6.5

Max. aperture (35mm equiv.)

f19.1 - f36.5

n/a

Metering

Multi, Center-weighted, Spot

Centre weighted, Evaluative, Multi-pattern

Exposure compensation

±3 EV (in 1/3 EV steps)

±2 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

15 sec

Bulb+30 sec

Max. shutter speed

1/2000 sec

1/4000 sec

Built-in flash

External flash

Viewfinder

Electronic

Optical (pentamirror)

White balance presets

Screen size

2.8"

1.8"

Screen resolution

461,000 dots

115,000 dots

Video capture

Max. video resolution

1920x1080 (24p)

Storage types

SD/SDHC/SDXC

CompactFlash type I, CompactFlash type II, Microdrive

USB

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

Lithium-Ion NB-10L rechargeable battery

Lithium-Ion NB-3L battery

Weight

595 g

540 g

Dimensions

122.5 x 87.3 x 105.5 mm

126.5 x 94.2 x 64 mm

Year

2012

2005

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Canon SX50 HS diagonal

The diagonal of SX50 HS sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm

Diagonal = √

6.16² + 4.62²

= 7.70 mm

Canon 350D diagonal

w = 22.20 mm
h = 14.80 mm

Diagonal = √

22.20² + 14.80²

= 26.68 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

SX50 HS sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²

350D sensor area

Width = 22.20 mm
Height = 14.80 mm

Surface area = 22.20 × 14.80 = 328.56 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

SX50 HS pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 4011 pixels

Pixel pitch =	6.16	× 1000	= 1.54 µm
	4011

350D pixel pitch

Sensor width = 22.20 mm
Sensor resolution width = 3464 pixels

Pixel pitch =	22.20	× 1000	= 6.41 µm
	3464

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

SX50 HS pixel area

Pixel pitch = 1.54 µm

Pixel area = 1.54² = 2.37 µm²

350D pixel area

Pixel pitch = 6.41 µm

Pixel area = 6.41² = 41.09 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

SX50 HS pixel density

Sensor resolution width = 4011 pixels
Sensor width = 0.616 cm

Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²

350D pixel density

Sensor resolution width = 3464 pixels
Sensor width = 2.22 cm

Pixel density = (3464 / 2.22)² / 1000000 = 2.43 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

SX50 HS sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.10

r = 6.16/4.62 = 1.33

X = √	12.10 × 1000000	= 3016
	1.33

Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016

Sensor resolution = 4011 x 3016

350D sensor resolution

Sensor width = 22.20 mm
Sensor height = 14.80 mm
Effective megapixels = 8.00

r = 22.20/14.80 = 1.5

X = √	8.00 × 1000000	= 2309
	1.5

Resolution horizontal: X × r = 2309 × 1.5 = 3464
Resolution vertical: X = 2309

Sensor resolution = 3464 x 2309

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

SX50 HS crop factor

Sensor diagonal in mm = 7.70 mm

Crop factor =	43.27	= 5.62
	7.70

350D crop factor

Sensor diagonal in mm = 26.68 mm

Crop factor =	43.27	= 1.62
	26.68

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

SX50 HS equivalent aperture

Crop factor = 5.62
Aperture = f3.4 - f6.5

35-mm equivalent aperture = (f3.4 - f6.5) × 5.62 = f19.1 - f36.5

350D equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Canon 350D, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Canon 350D is 1.62

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.