Fujifilm FinePix F500 EXR vs. Fujifilm FinePix EX-20
Comparison
change cameras » | |||||
|
vs |
|
|||
Fujifilm FinePix F500 EXR | Fujifilm FinePix EX-20 | ||||
check price » | check price » |
Megapixels
16.00
2.10
Max. image resolution
4608 x 3456
1600 x 1200
Sensor
Sensor type
CMOS
CMOS
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.7" (~ 5.33 x 4 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.44 | : | 1 |
(ratio) | ||
Fujifilm FinePix F500 EXR | Fujifilm FinePix EX-20 |
Surface area:
30.72 mm² | vs | 21.32 mm² |
Difference: 9.4 mm² (44%)
F500 EXR sensor is approx. 1.44x bigger than EX-20 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Fujifilm F500 EXR (2011) and Fujifilm EX-20 (2001).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 8.25 µm² (427%)
A pixel on Fujifilm EX-20 sensor is approx. 427% bigger than a pixel on Fujifilm F500 EXR.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm F500 EXR
Fujifilm EX-20
Total megapixels
Effective megapixels
16.00
Optical zoom
15x
No
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600, 3200, 6400, 12800
100
RAW
Manual focus
Normal focus range
45 cm
120 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
24 - 360 mm
48 mm
Aperture priority
Yes
No
Max. aperture
f3.5 - f5.3
f3.2
Metering
Multi-segment, Spot, TTL 256-zones metering
Centre weighted
Exposure compensation
±2 EV (in 1/3 EV steps)
-0.9 - +1.5 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
8 sec
Max. shutter speed
1/2000 sec
Built-in flash
External flash
Viewfinder
None
Optical
White balance presets
5
Screen size
3"
1.6"
Screen resolution
460,000 dots
55,000 dots
Video capture
Max. video resolution
Storage types
SDHC, SDXC, Secure Digital
SmartMedia
USB
USB 2.0 (480 Mbit/sec)
USB 1.1
HDMI
Wireless
GPS
Battery
Lithium-Ion NP-50 rechargeable battery
2x AA
Weight
195 g
116 g
Dimensions
103.5 x 59.2 x 32.6 mm
110 x 62 x 35 mm
Year
2011
2001
Choose cameras to compare
Popular comparisons:
- Fujifilm FinePix F500 EXR vs. Fujifilm FinePix F660EXR
- Fujifilm FinePix F500 EXR vs. Canon PowerShot SX240 HS
- Fujifilm FinePix F500 EXR vs. Panasonic Lumix DMC-TZ20
- Fujifilm FinePix F500 EXR vs. Fujifilm FinePix F550 EXR
- Fujifilm FinePix F500 EXR vs. Samsung NX1000
- Fujifilm FinePix F500 EXR vs. Canon PowerShot SX150 IS
- Fujifilm FinePix F500 EXR vs. Fujifilm FinePix F600 EXR
- Fujifilm FinePix F500 EXR vs. Sony Cyber-shot DSC-H70
- Fujifilm FinePix F500 EXR vs. Samsung WB750
- Fujifilm FinePix F500 EXR vs. Nikon Coolpix L310
- Fujifilm FinePix F500 EXR vs. Nikon Coolpix 3700
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Fujifilm F500 EXR diagonal
The diagonal of F500 EXR sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Fujifilm EX-20 diagonal
The diagonal of EX-20 sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
F500 EXR sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
EX-20 sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
F500 EXR pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 4612 pixels
Sensor resolution width = 4612 pixels
Pixel pitch = | 6.40 | × 1000 | = 1.39 µm |
4612 |
EX-20 pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 1672 pixels
Sensor resolution width = 1672 pixels
Pixel pitch = | 5.33 | × 1000 | = 3.19 µm |
1672 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
F500 EXR pixel area
Pixel pitch = 1.39 µm
Pixel area = 1.39² = 1.93 µm²
Pixel area = 1.39² = 1.93 µm²
EX-20 pixel area
Pixel pitch = 3.19 µm
Pixel area = 3.19² = 10.18 µm²
Pixel area = 3.19² = 10.18 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
F500 EXR pixel density
Sensor resolution width = 4612 pixels
Sensor width = 0.64 cm
Pixel density = (4612 / 0.64)² / 1000000 = 51.93 MP/cm²
Sensor width = 0.64 cm
Pixel density = (4612 / 0.64)² / 1000000 = 51.93 MP/cm²
EX-20 pixel density
Sensor resolution width = 1672 pixels
Sensor width = 0.533 cm
Pixel density = (1672 / 0.533)² / 1000000 = 9.84 MP/cm²
Sensor width = 0.533 cm
Pixel density = (1672 / 0.533)² / 1000000 = 9.84 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
F500 EXR sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 16.00
Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Sensor height = 4.80 mm
Effective megapixels = 16.00
r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
EX-20 sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 2.10
Resolution horizontal: X × r = 1257 × 1.33 = 1672
Resolution vertical: X = 1257
Sensor resolution = 1672 x 1257
Sensor height = 4.00 mm
Effective megapixels = 2.10
r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 1257
Sensor resolution = 1672 x 1257
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
F500 EXR crop factor
Sensor diagonal in mm = 8.00 mm
Crop factor = | 43.27 | = 5.41 |
8.00 |
EX-20 crop factor
Sensor diagonal in mm = 6.66 mm
Crop factor = | 43.27 | = 6.5 |
6.66 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
F500 EXR equivalent aperture
Crop factor = 5.41
Aperture = f3.5 - f5.3
35-mm equivalent aperture = (f3.5 - f5.3) × 5.41 = f18.9 - f28.7
Aperture = f3.5 - f5.3
35-mm equivalent aperture = (f3.5 - f5.3) × 5.41 = f18.9 - f28.7
EX-20 equivalent aperture
Crop factor = 6.5
Aperture = f3.2
35-mm equivalent aperture = (f3.2) × 6.5 = f20.8
Aperture = f3.2
35-mm equivalent aperture = (f3.2) × 6.5 = f20.8
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.