Fujifilm FinePix F70EXR vs. Panasonic Lumix DMC-TZ10
Comparison
change cameras » | |||||
|
vs |
|
|||
Fujifilm FinePix F70EXR | Panasonic Lumix DMC-TZ10 | ||||
check price » | check price » |
Megapixels
10.00
12.10
Max. image resolution
3616 x 2712
4000 x 3000
Sensor
Sensor type
CCD
CCD
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.11 | : | 1 |
(ratio) | ||
Fujifilm FinePix F70EXR | Panasonic Lumix DMC-TZ10 |
Surface area:
30.72 mm² | vs | 27.72 mm² |
Difference: 3 mm² (11%)
F70EXR sensor is approx. 1.11x bigger than TZ10 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.75 µm² (32%)
A pixel on Fujifilm F70EXR sensor is approx. 32% bigger than a pixel on Panasonic TZ10.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm F70EXR
Panasonic TZ10
Total megapixels
14.50
Effective megapixels
10.00
12.10
Optical zoom
10x
12x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600, 3200, 6400, 12800
Auto, 80, 100, 200, 400, 800, 1600 - 6400
RAW
Manual focus
Normal focus range
45 cm
50 cm
Macro focus range
5 cm
3 cm
Focal length (35mm equiv.)
27 - 270 mm
25 - 300 mm
Aperture priority
Yes
Yes
Max. aperture
f3.3 - f5.6
f3.3 - f4.9
Metering
TTL 256-zones metering
Centre weighted, Intelligent Multiple, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
8 sec
60 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
7
6
Screen size
2.7"
3"
Screen resolution
230,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
SDHC, SDXC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-ion NP-50 battery
Lithium-Ion rechargeable battery
Weight
205 g
128 g
Dimensions
99.3 x 58.9 x 22.7 mm
103.3 x 59.6 x 32.6 mm
Year
2009
2010
Choose cameras to compare
Popular comparisons:
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix F80EXR
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix F200EXR
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix F500 EXR
- Fujifilm FinePix F70EXR vs. Panasonic Lumix DMC-TZ10
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix F100fd
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix F900EXR
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix Z30
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix F660EXR
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix S5200 Zoom
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix F550 EXR
- Fujifilm FinePix F70EXR vs. Fujifilm FinePix F72EXR
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Fujifilm F70EXR diagonal
The diagonal of F70EXR sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Panasonic TZ10 diagonal
The diagonal of TZ10 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
F70EXR sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
TZ10 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
F70EXR pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
Pixel pitch = | 6.40 | × 1000 | = 1.75 µm |
3647 |
TZ10 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 4011 pixels
Sensor resolution width = 4011 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.52 µm |
4011 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
F70EXR pixel area
Pixel pitch = 1.75 µm
Pixel area = 1.75² = 3.06 µm²
Pixel area = 1.75² = 3.06 µm²
TZ10 pixel area
Pixel pitch = 1.52 µm
Pixel area = 1.52² = 2.31 µm²
Pixel area = 1.52² = 2.31 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
F70EXR pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.64 cm
Pixel density = (3647 / 0.64)² / 1000000 = 32.47 MP/cm²
Sensor width = 0.64 cm
Pixel density = (3647 / 0.64)² / 1000000 = 32.47 MP/cm²
TZ10 pixel density
Sensor resolution width = 4011 pixels
Sensor width = 0.608 cm
Pixel density = (4011 / 0.608)² / 1000000 = 43.52 MP/cm²
Sensor width = 0.608 cm
Pixel density = (4011 / 0.608)² / 1000000 = 43.52 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
F70EXR sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 4.80 mm
Effective megapixels = 10.00
r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
TZ10 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Sensor height = 4.56 mm
Effective megapixels = 12.10
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
F70EXR crop factor
Sensor diagonal in mm = 8.00 mm
Crop factor = | 43.27 | = 5.41 |
8.00 |
TZ10 crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
F70EXR equivalent aperture
Crop factor = 5.41
Aperture = f3.3 - f5.6
35-mm equivalent aperture = (f3.3 - f5.6) × 5.41 = f17.9 - f30.3
Aperture = f3.3 - f5.6
35-mm equivalent aperture = (f3.3 - f5.6) × 5.41 = f17.9 - f30.3
TZ10 equivalent aperture
Crop factor = 5.69
Aperture = f3.3 - f4.9
35-mm equivalent aperture = (f3.3 - f4.9) × 5.69 = f18.8 - f27.9
Aperture = f3.3 - f4.9
35-mm equivalent aperture = (f3.3 - f4.9) × 5.69 = f18.8 - f27.9
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.