Fujifilm FinePix S5500 Zoom vs. Fujifilm FinePix S4500

Comparison

change cameras »
FinePix S5500 Zoom image
vs
FinePix S4500 image
Fujifilm FinePix S5500 Zoom Fujifilm FinePix S4500
check price » check price »
Megapixels
4.20
14.00
Max. image resolution
2272 x 1704
4288 x 3216

Sensor

Sensor type
CCD
CCD
Sensor size
1/2.7" (~ 5.33 x 4 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor resolution
2363 x 1777
4315 x 3244
Diagonal
6.66 mm
7.70 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1.33
(ratio)
Fujifilm FinePix S5500 Zoom Fujifilm FinePix S4500
Surface area:
21.32 mm² vs 28.46 mm²
Difference: 7.14 mm² (33%)
S4500 sensor is approx. 1.33x bigger than S5500 Zoom sensor.
Note: You are comparing sensors of very different generations. There is a gap of 8 years between Fujifilm S5500 Zoom (2004) and Fujifilm S4500 (2012). Eight years is a lot of time in terms of technology, meaning newer sensors are overall much more efficient than the older ones.
Pixel pitch
2.26 µm
1.43 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.83 µm (58%)
Pixel pitch of S5500 Zoom is approx. 58% higher than pixel pitch of S4500.
Pixel area
5.11 µm²
2.04 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 3.07 µm² (150%)
A pixel on Fujifilm S5500 Zoom sensor is approx. 150% bigger than a pixel on Fujifilm S4500.
Pixel density
19.65 MP/cm²
49.07 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 29.42 µm (150%)
Fujifilm S4500 has approx. 150% higher pixel density than Fujifilm S5500 Zoom.
To learn about the accuracy of these numbers, click here.



Specs

Fujifilm S5500 Zoom
Fujifilm S4500
Crop factor
6.5
5.62
Total megapixels
Effective megapixels
14.00
Optical zoom
Yes
30x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 64, 100, 200, 400
Auto, 64, 100, 200, 300, 400, 800, 1600, (3200, 6400 with boost)
RAW
Manual focus
Normal focus range
90 cm
40 cm
Macro focus range
10 cm
2 cm
Focal length (35mm equiv.)
37 - 370 mm
24 - 720 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f3.1
f3.1 - f5.9
Max. aperture (35mm equiv.)
f18.2 - f20.2
f17.4 - f33.2
Metering
64-segment, Centre weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
15 sec
8 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
5
6
Screen size
1.5"
3"
Screen resolution
115,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
xD Picture card
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4x AA
4 x AA type alkaline batteries
Weight
337 g
543 g
Dimensions
113 x 81 x 79 mm
118 x 81 x 100 mm
Year
2004
2012




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Fujifilm S5500 Zoom diagonal

The diagonal of S5500 Zoom sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of that value - 6.66 mm. If you want to know why, see sensor sizes.

w = 5.33 mm
h = 4.00 mm
Diagonal =  5.33² + 4.00²   = 6.66 mm

Fujifilm S4500 diagonal

The diagonal of S4500 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm
Diagonal =  6.16² + 4.62²   = 7.70 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

S5500 Zoom sensor area

Width = 5.33 mm
Height = 4.00 mm

Surface area = 5.33 × 4.00 = 21.32 mm²

S4500 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

S5500 Zoom pixel pitch

Sensor width = 5.33 mm
Sensor resolution width = 2363 pixels
Pixel pitch =   5.33  × 1000  = 2.26 µm
2363

S4500 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 4315 pixels
Pixel pitch =   6.16  × 1000  = 1.43 µm
4315


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

S5500 Zoom pixel area

Pixel pitch = 2.26 µm

Pixel area = 2.26² = 5.11 µm²

S4500 pixel area

Pixel pitch = 1.43 µm

Pixel area = 1.43² = 2.04 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

S5500 Zoom pixel density

Sensor resolution width = 2363 pixels
Sensor width = 0.533 cm

Pixel density = (2363 / 0.533)² / 1000000 = 19.65 MP/cm²

S4500 pixel density

Sensor resolution width = 4315 pixels
Sensor width = 0.616 cm

Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

S5500 Zoom sensor resolution

Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 4.20
r = 5.33/4.00 = 1.33
X =  4.20 × 1000000  = 1777
1.33
Resolution horizontal: X × r = 1777 × 1.33 = 2363
Resolution vertical: X = 1777

Sensor resolution = 2363 x 1777

S4500 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.00
r = 6.16/4.62 = 1.33
X =  14.00 × 1000000  = 3244
1.33
Resolution horizontal: X × r = 3244 × 1.33 = 4315
Resolution vertical: X = 3244

Sensor resolution = 4315 x 3244


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


S5500 Zoom crop factor

Sensor diagonal in mm = 6.66 mm
Crop factor =   43.27  = 6.5
6.66

S4500 crop factor

Sensor diagonal in mm = 7.70 mm
Crop factor =   43.27  = 5.62
7.70

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

S5500 Zoom equivalent aperture

Crop factor = 6.5
Aperture = f2.8 - f3.1

35-mm equivalent aperture = (f2.8 - f3.1) × 6.5 = f18.2 - f20.2

S4500 equivalent aperture

Crop factor = 5.62
Aperture = f3.1 - f5.9

35-mm equivalent aperture = (f3.1 - f5.9) × 5.62 = f17.4 - f33.2

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.