Fujifilm FinePix S8500 vs. Canon EOS 40D
Comparison
change cameras » | |||||
|
vs |
|
|||
Fujifilm FinePix S8500 | Canon EOS 40D | ||||
check price » | check price » |
Megapixels
16.20
10.10
Max. image resolution
4608 x 3456
3888 x 2592
Sensor
Sensor type
CMOS
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
22.2 x 14.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 11.54 |
(ratio) | ||
Fujifilm FinePix S8500 | Canon EOS 40D |
Surface area:
28.46 mm² | vs | 328.56 mm² |
Difference: 300.1 mm² (1054%)
40D sensor is approx. 11.54x bigger than S8500 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 6 years between Fujifilm S8500 (2013) and Canon 40D (2007).
Six years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 30.72 µm² (1736%)
A pixel on Canon 40D sensor is approx. 1736% bigger than a pixel on Fujifilm S8500.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm S8500
Canon 40D
Total megapixels
10.50
Effective megapixels
16.20
10.10
Optical zoom
46x
Digital zoom
Yes
No
ISO sensitivity
Auto, 64, 100, 200, 300, 400, 800, 1600, 3200, 6400, 12800
Auto, 100, 200, 400, 800, 1600, 3200 (H)
RAW
Manual focus
Normal focus range
45 cm
Macro focus range
1 cm
Focal length (35mm equiv.)
24 - 1104 mm
Aperture priority
Yes
Yes
Max. aperture
f2.9 - f6.5
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
8 sec
30 sec
Max. shutter speed
1/7000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
Electronic
Optical (pentaprism)
White balance presets
7
6
Screen size
3"
3"
Screen resolution
460,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SD/SDHC/SDXC
Compact Flash (Type I or II)
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4 x AA type alkaline batteries
Canon Lithium-Ion
Weight
670 g
822 g
Dimensions
122.6 x 86.9 x 116.2 mm
146 x 108 x 74 mm
Year
2013
2007
Choose cameras to compare
Popular comparisons:
- Fujifilm FinePix S8500 vs. Nikon Coolpix L820
- Fujifilm FinePix S8500 vs. Canon PowerShot SX50 HS
- Fujifilm FinePix S8500 vs. Fujifilm FinePix HS50 EXR
- Fujifilm FinePix S8500 vs. Nikon Coolpix P520
- Fujifilm FinePix S8500 vs. Fujifilm FinePix HS30 EXR
- Fujifilm FinePix S8500 vs. Fujifilm FinePix S8400
- Fujifilm FinePix S8500 vs. Nikon Coolpix P510
- Fujifilm FinePix S8500 vs. Fujifilm FinePix SL1000
- Fujifilm FinePix S8500 vs. Fujifilm FinePix S6800
- Fujifilm FinePix S8500 vs. Sony Cyber-shot DSC-HX300
- Fujifilm FinePix S8500 vs. Fujifilm X-S1
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Fujifilm S8500 diagonal
The diagonal of S8500 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Canon 40D diagonal
w = 22.20 mm
h = 14.80 mm
h = 14.80 mm
Diagonal = √ | 22.20² + 14.80² | = 26.68 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
S8500 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
40D sensor area
Width = 22.20 mm
Height = 14.80 mm
Surface area = 22.20 × 14.80 = 328.56 mm²
Height = 14.80 mm
Surface area = 22.20 × 14.80 = 328.56 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
S8500 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4642 pixels
Sensor resolution width = 4642 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.33 µm |
4642 |
40D pixel pitch
Sensor width = 22.20 mm
Sensor resolution width = 3893 pixels
Sensor resolution width = 3893 pixels
Pixel pitch = | 22.20 | × 1000 | = 5.7 µm |
3893 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
S8500 pixel area
Pixel pitch = 1.33 µm
Pixel area = 1.33² = 1.77 µm²
Pixel area = 1.33² = 1.77 µm²
40D pixel area
Pixel pitch = 5.7 µm
Pixel area = 5.7² = 32.49 µm²
Pixel area = 5.7² = 32.49 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
S8500 pixel density
Sensor resolution width = 4642 pixels
Sensor width = 0.616 cm
Pixel density = (4642 / 0.616)² / 1000000 = 56.79 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4642 / 0.616)² / 1000000 = 56.79 MP/cm²
40D pixel density
Sensor resolution width = 3893 pixels
Sensor width = 2.22 cm
Pixel density = (3893 / 2.22)² / 1000000 = 3.08 MP/cm²
Sensor width = 2.22 cm
Pixel density = (3893 / 2.22)² / 1000000 = 3.08 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
S8500 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.20
Resolution horizontal: X × r = 3490 × 1.33 = 4642
Resolution vertical: X = 3490
Sensor resolution = 4642 x 3490
Sensor height = 4.62 mm
Effective megapixels = 16.20
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3490
Sensor resolution = 4642 x 3490
40D sensor resolution
Sensor width = 22.20 mm
Sensor height = 14.80 mm
Effective megapixels = 10.10
Resolution horizontal: X × r = 2595 × 1.5 = 3893
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Sensor height = 14.80 mm
Effective megapixels = 10.10
r = 22.20/14.80 = 1.5 |
|
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
S8500 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
40D crop factor
Sensor diagonal in mm = 26.68 mm
Crop factor = | 43.27 | = 1.62 |
26.68 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
S8500 equivalent aperture
Crop factor = 5.62
Aperture = f2.9 - f6.5
35-mm equivalent aperture = (f2.9 - f6.5) × 5.62 = f16.3 - f36.5
Aperture = f2.9 - f6.5
35-mm equivalent aperture = (f2.9 - f6.5) × 5.62 = f16.3 - f36.5
40D equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 40D, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 40D is 1.62
Crop factor for Canon 40D is 1.62
More comparisons of Fujifilm S8500:
- Fujifilm FinePix S8500 vs. Nikon Coolpix L810
- Fujifilm FinePix S8500 vs. Fujifilm FinePix S4800
- Fujifilm FinePix S8500 vs. Fujifilm FinePix S2950
- Fujifilm FinePix S8500 vs. Canon EOS 40D
- Fujifilm FinePix S8500 vs. Nikon Coolpix L830
- Fujifilm FinePix S8500 vs. Sony Cyber-shot DSC-RX100
- Fujifilm FinePix S8500 vs. Canon EOS 7D
- Fujifilm FinePix S8500 vs. Fujifilm FinePix S8200
- Fujifilm FinePix S8500 vs. Fujifilm FinePix HS35 EXR
- Fujifilm FinePix S8500 vs. Sony Cyber-shot DSC-HX200V
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.