Fujifilm X100V vs. Fujifilm FinePix X100
Comparison
change cameras » | |||||
|
vs |
|
|||
Fujifilm X100V | Fujifilm FinePix X100 | ||||
check price » | check price » |
Megapixels
26.10
12.30
Max. image resolution
6240 x 4160
4288 x 2848
Sensor
Sensor type
CMOS
CMOS
Sensor size
23.5 x 15.6 mm
23.6 x 15.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.02 |
(ratio) | ||
Fujifilm X100V | Fujifilm FinePix X100 |
Surface area:
366.60 mm² | vs | 372.88 mm² |
Difference: 6.28 mm² (2%)
X100 sensor is slightly bigger than X100V sensor (only 2% difference).
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Fujifilm X100V (2020) and Fujifilm X100 (2010).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 16.37 µm² (117%)
A pixel on Fujifilm X100 sensor is approx. 117% bigger than a pixel on Fujifilm X100V.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm X100V
Fujifilm X100
Total megapixels
Effective megapixels
26.10
12.30
Optical zoom
1x
1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 160-12800 (expandable to 80-51200)
Auto, 200, 400, 800, 1600, 3200, 6400 (expandable to 100-12800)
RAW
Manual focus
Normal focus range
80 cm
80 cm
Macro focus range
10 cm
10 cm
Focal length (35mm equiv.)
35 mm
35 mm
Aperture priority
Yes
Yes
Max. aperture
f2.0
f2.0
Metering
Multi, Center-weighted, Average, Spot
Centre weighted, Multi-pattern, Spot
Exposure compensation
±5 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/32000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic and Optical (tunnel)
Electronic and Optical (tunnel)
White balance presets
7
7
Screen size
3"
2.8"
Screen resolution
1,620,000 dots
460,000 dots
Video capture
Max. video resolution
4096x2160 (30p/25p/24p)
1280x720 (24p)
Storage types
SD/SDHC/SDXC
SDHC, SDXC, Secure Digital
USB
USB 3.0 (5 GBit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
NP-W126S lithium-ion battery
Lithium-Ion NP-95 rechargeable battery
Weight
478 g
445 g
Dimensions
128 x 74.8 x 53.3 mm
127 x 75 x 54 mm
Year
2020
2010
Choose cameras to compare
Popular comparisons:
- Fujifilm X100V vs. Sony Cyber-shot DSC-RX100 VII
- Fujifilm X100V vs. Leica D-Lux 7
- Fujifilm X100V vs. Ricoh GR III
- Fujifilm X100V vs. Leica Q2
- Fujifilm X100V vs. Panasonic Lumix DC-LX100 II
- Fujifilm X100V vs. Fujifilm X100F
- Fujifilm X100V vs. Fujifilm X100T
- Fujifilm X100V vs. Canon PowerShot G7 X Mark III
- Fujifilm X100V vs. Sony Cyber-shot DSC-RX1R II
- Fujifilm X100V vs. Canon PowerShot G1 X Mark III
- Fujifilm X100V vs. Panasonic Lumix DC-GX9
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Fujifilm X100V diagonal
w = 23.50 mm
h = 15.60 mm
h = 15.60 mm
Diagonal = √ | 23.50² + 15.60² | = 28.21 mm |
Fujifilm X100 diagonal
w = 23.60 mm
h = 15.80 mm
h = 15.80 mm
Diagonal = √ | 23.60² + 15.80² | = 28.40 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
X100V sensor area
Width = 23.50 mm
Height = 15.60 mm
Surface area = 23.50 × 15.60 = 366.60 mm²
Height = 15.60 mm
Surface area = 23.50 × 15.60 = 366.60 mm²
X100 sensor area
Width = 23.60 mm
Height = 15.80 mm
Surface area = 23.60 × 15.80 = 372.88 mm²
Height = 15.80 mm
Surface area = 23.60 × 15.80 = 372.88 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
X100V pixel pitch
Sensor width = 23.50 mm
Sensor resolution width = 6277 pixels
Sensor resolution width = 6277 pixels
Pixel pitch = | 23.50 | × 1000 | = 3.74 µm |
6277 |
X100 pixel pitch
Sensor width = 23.60 mm
Sensor resolution width = 4281 pixels
Sensor resolution width = 4281 pixels
Pixel pitch = | 23.60 | × 1000 | = 5.51 µm |
4281 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
X100V pixel area
Pixel pitch = 3.74 µm
Pixel area = 3.74² = 13.99 µm²
Pixel area = 3.74² = 13.99 µm²
X100 pixel area
Pixel pitch = 5.51 µm
Pixel area = 5.51² = 30.36 µm²
Pixel area = 5.51² = 30.36 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
X100V pixel density
Sensor resolution width = 6277 pixels
Sensor width = 2.35 cm
Pixel density = (6277 / 2.35)² / 1000000 = 7.13 MP/cm²
Sensor width = 2.35 cm
Pixel density = (6277 / 2.35)² / 1000000 = 7.13 MP/cm²
X100 pixel density
Sensor resolution width = 4281 pixels
Sensor width = 2.36 cm
Pixel density = (4281 / 2.36)² / 1000000 = 3.29 MP/cm²
Sensor width = 2.36 cm
Pixel density = (4281 / 2.36)² / 1000000 = 3.29 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
X100V sensor resolution
Sensor width = 23.50 mm
Sensor height = 15.60 mm
Effective megapixels = 26.10
Resolution horizontal: X × r = 4157 × 1.51 = 6277
Resolution vertical: X = 4157
Sensor resolution = 6277 x 4157
Sensor height = 15.60 mm
Effective megapixels = 26.10
r = 23.50/15.60 = 1.51 |
|
Resolution vertical: X = 4157
Sensor resolution = 6277 x 4157
X100 sensor resolution
Sensor width = 23.60 mm
Sensor height = 15.80 mm
Effective megapixels = 12.30
Resolution horizontal: X × r = 2873 × 1.49 = 4281
Resolution vertical: X = 2873
Sensor resolution = 4281 x 2873
Sensor height = 15.80 mm
Effective megapixels = 12.30
r = 23.60/15.80 = 1.49 |
|
Resolution vertical: X = 2873
Sensor resolution = 4281 x 2873
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
X100V crop factor
Sensor diagonal in mm = 28.21 mm
Crop factor = | 43.27 | = 1.53 |
28.21 |
X100 crop factor
Sensor diagonal in mm = 28.40 mm
Crop factor = | 43.27 | = 1.52 |
28.40 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
X100V equivalent aperture
Crop factor = 1.53
Aperture = f2.0
35-mm equivalent aperture = (f2.0) × 1.53 = f3.1
Aperture = f2.0
35-mm equivalent aperture = (f2.0) × 1.53 = f3.1
X100 equivalent aperture
Crop factor = 1.52
Aperture = f2.0
35-mm equivalent aperture = (f2.0) × 1.52 = f3
Aperture = f2.0
35-mm equivalent aperture = (f2.0) × 1.52 = f3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.