GE X500 vs. Panasonic Lumix DMC-FZ200

Comparison

change cameras »
X500 image
vs
Lumix DMC-FZ200 image
GE X500 Panasonic Lumix DMC-FZ200
check price » check price »
Megapixels
16.50
12.10
Max. image resolution
4608 x 3456
4000 x 3000

Sensor

Sensor type
CCD
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor resolution
4684 x 3522
4011 x 3016
Diagonal
7.70 mm
7.70 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1
(ratio)
GE X500 Panasonic Lumix DMC-FZ200
Surface area:
28.46 mm² vs 28.46 mm²
Difference: 0 mm² (0%)
X500 and FZ200 sensors are the same size.
Pixel pitch
1.32 µm
1.54 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.22 µm (17%)
Pixel pitch of FZ200 is approx. 17% higher than pixel pitch of X500.
Pixel area
1.74 µm²
2.37 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.63 µm² (36%)
A pixel on Panasonic FZ200 sensor is approx. 36% bigger than a pixel on GE X500.
Pixel density
57.82 MP/cm²
42.4 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 15.42 µm (36%)
GE X500 has approx. 36% higher pixel density than Panasonic FZ200.
To learn about the accuracy of these numbers, click here.



Specs

GE X500
Panasonic FZ200
Crop factor
5.62
5.62
Total megapixels
12.80
Effective megapixels
12.10
Optical zoom
Yes
24x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400, 800, 1600, 3200
Auto, 100, 200, 400, 800, 1600, 3200, (6400 with boost)
RAW
Manual focus
Normal focus range
60 cm
30 cm
Macro focus range
5 cm
1 cm
Focal length (35mm equiv.)
27 - 405 mm
25 - 600 mm
Aperture priority
Yes
Yes
Max. aperture
f3.0 - f5.2
f2.8
Max. aperture (35mm equiv.)
f16.9 - f29.2
f15.7
Metering
Centre weighted, Multi-segment, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
4 sec
60 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
6
5
Screen size
2.7"
3"
Screen resolution
230,400 dots
460,000 dots
Video capture
Max. video resolution
1920x1080 (60p/60i/30p)
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC, Internal
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4x AA
Lithium-Ion rechargeable battery
Weight
350 g
588 g
Dimensions
103 x 74 x 68 mm
125 x 87 x 110 mm
Year
2011
2012




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

GE X500 diagonal

The diagonal of X500 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm
Diagonal =  6.16² + 4.62²   = 7.70 mm

Panasonic FZ200 diagonal

The diagonal of FZ200 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm
Diagonal =  6.16² + 4.62²   = 7.70 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

X500 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²

FZ200 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

X500 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 4684 pixels
Pixel pitch =   6.16  × 1000  = 1.32 µm
4684

FZ200 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 4011 pixels
Pixel pitch =   6.16  × 1000  = 1.54 µm
4011


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

X500 pixel area

Pixel pitch = 1.32 µm

Pixel area = 1.32² = 1.74 µm²

FZ200 pixel area

Pixel pitch = 1.54 µm

Pixel area = 1.54² = 2.37 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

X500 pixel density

Sensor resolution width = 4684 pixels
Sensor width = 0.616 cm

Pixel density = (4684 / 0.616)² / 1000000 = 57.82 MP/cm²

FZ200 pixel density

Sensor resolution width = 4011 pixels
Sensor width = 0.616 cm

Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

X500 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.50
r = 6.16/4.62 = 1.33
X =  16.50 × 1000000  = 3522
1.33
Resolution horizontal: X × r = 3522 × 1.33 = 4684
Resolution vertical: X = 3522

Sensor resolution = 4684 x 3522

FZ200 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.10
r = 6.16/4.62 = 1.33
X =  12.10 × 1000000  = 3016
1.33
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016

Sensor resolution = 4011 x 3016


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


X500 crop factor

Sensor diagonal in mm = 7.70 mm
Crop factor =   43.27  = 5.62
7.70

FZ200 crop factor

Sensor diagonal in mm = 7.70 mm
Crop factor =   43.27  = 5.62
7.70

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

X500 equivalent aperture

Crop factor = 5.62
Aperture = f3.0 - f5.2

35-mm equivalent aperture = (f3.0 - f5.2) × 5.62 = f16.9 - f29.2

FZ200 equivalent aperture

Crop factor = 5.62
Aperture = f2.8

35-mm equivalent aperture = (f2.8) × 5.62 = f15.7

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.