Jenoptik JD C 1.3 LCD vs. Canon PowerShot A560
Comparison
change cameras » | |||||
|
vs |
|
|||
Jenoptik JD C 1.3 LCD | Canon PowerShot A560 | ||||
check price » | check price » |
Megapixels
1.30
7.10
Max. image resolution
1600 x 1200
3072 x 2304
Sensor
Sensor type
CMOS
CCD
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.24 | : | 1 |
(ratio) | ||
Jenoptik JD C 1.3 LCD | Canon PowerShot A560 |
Surface area:
30.72 mm² | vs | 24.84 mm² |
Difference: 5.88 mm² (24%)
JD C 1.3 LCD sensor is approx. 1.24x bigger than A560 sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between Jenoptik JD C 1.3 LCD (2002) and Canon A560 (2007).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 20.22 µm² (578%)
A pixel on Jenoptik JD C 1.3 LCD sensor is approx. 578% bigger than a pixel on Canon A560.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Jenoptik JD C 1.3 LCD
Canon A560
Total megapixels
7.10
Effective megapixels
7.10
Optical zoom
No
4x
Digital zoom
Yes
Yes
ISO sensitivity
100
Auto, 80 ,100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
100 cm
45 cm
Macro focus range
20 cm
5 cm
Focal length (35mm equiv.)
46 mm
35 - 140 mm
Aperture priority
No
No
Max. aperture
f2.8
f2.6 - f5.5
Metering
Centre weighted
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/4 sec
15 sec
Max. shutter speed
1/4000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical
Optical (tunnel)
White balance presets
6
5
Screen size
1.5"
2.5"
Screen resolution
115,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
SD/SDHC card
USB
USB 1.1
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4x AAA
AA (2) batteries (NiMH recommended)
Weight
110 g
205 g
Dimensions
97 x 28 x 63 mm
91 x 64 x 43 mm
Year
2002
2007
Choose cameras to compare
Popular comparisons:
- Jenoptik JD C 1.3 LCD vs. Canon PowerShot A560
- Jenoptik JD C 1.3 LCD vs. Panasonic Lumix DMC-LX100
- Jenoptik JD C 1.3 LCD vs. Samsung Galaxy Camera 2
- Jenoptik JD C 1.3 LCD vs. Canon EOS M50
- Jenoptik JD C 1.3 LCD vs. Nikon Coolpix P300
- Jenoptik JD C 1.3 LCD vs. Fujifilm X-T200
- Jenoptik JD C 1.3 LCD vs. Canon EOS M200
- Jenoptik JD C 1.3 LCD vs. Panasonic Lumix DMC-LX10
- Jenoptik JD C 1.3 LCD vs. Casio QV-5700
- Jenoptik JD C 1.3 LCD vs. Fujifilm XF10
- Jenoptik JD C 1.3 LCD vs. Sony Alpha a5100
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Jenoptik JD C 1.3 LCD diagonal
The diagonal of JD C 1.3 LCD sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Canon A560 diagonal
The diagonal of A560 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
JD C 1.3 LCD sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
A560 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
JD C 1.3 LCD pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1315 pixels
Sensor resolution width = 1315 pixels
Pixel pitch = | 6.40 | × 1000 | = 4.87 µm |
1315 |
A560 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3072 pixels
Sensor resolution width = 3072 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.87 µm |
3072 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
JD C 1.3 LCD pixel area
Pixel pitch = 4.87 µm
Pixel area = 4.87² = 23.72 µm²
Pixel area = 4.87² = 23.72 µm²
A560 pixel area
Pixel pitch = 1.87 µm
Pixel area = 1.87² = 3.5 µm²
Pixel area = 1.87² = 3.5 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
JD C 1.3 LCD pixel density
Sensor resolution width = 1315 pixels
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
A560 pixel density
Sensor resolution width = 3072 pixels
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
JD C 1.3 LCD sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.30
Resolution horizontal: X × r = 989 × 1.33 = 1315
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Sensor height = 4.80 mm
Effective megapixels = 1.30
r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
A560 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.10
Resolution horizontal: X × r = 2310 × 1.33 = 3072
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Sensor height = 4.32 mm
Effective megapixels = 7.10
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
JD C 1.3 LCD crop factor
Sensor diagonal in mm = 8.00 mm
Crop factor = | 43.27 | = 5.41 |
8.00 |
A560 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
JD C 1.3 LCD equivalent aperture
Crop factor = 5.41
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.41 = f15.1
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.41 = f15.1
A560 equivalent aperture
Crop factor = 6.02
Aperture = f2.6 - f5.5
35-mm equivalent aperture = (f2.6 - f5.5) × 6.02 = f15.7 - f33.1
Aperture = f2.6 - f5.5
35-mm equivalent aperture = (f2.6 - f5.5) × 6.02 = f15.7 - f33.1
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.