Jenoptik JD C 3.1 LCD vs. Kodak PixPro AZ651
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Jenoptik JD C 3.1 LCD | Kodak PixPro AZ651 | ||||
| check price » | check price » | ||||
Megapixels
3.14
20.68
Max. image resolution
2048 x 1536
5184 x 3888
Sensor
Sensor type
CMOS
CMOS
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.08 | : | 1 |
| (ratio) | ||
| Jenoptik JD C 3.1 LCD | Kodak PixPro AZ651 | |
Surface area:
| 30.72 mm² | vs | 28.46 mm² |
Difference: 2.26 mm² (8%)
JD C 3.1 LCD sensor is approx. 1.08x bigger than AZ651 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Jenoptik JD C 3.1 LCD (2004) and Kodak AZ651 (2014).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 8.43 µm² (615%)
A pixel on Jenoptik JD C 3.1 LCD sensor is approx. 615% bigger than a pixel on Kodak AZ651.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Jenoptik JD C 3.1 LCD
Kodak AZ651
Total megapixels
21.14
Effective megapixels
20.68
Optical zoom
No
65x
Digital zoom
Yes
Yes
ISO sensitivity
100
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
100 cm
50 cm
Macro focus range
20 cm
1 cm
Focal length (35mm equiv.)
44 mm
24 - 1560 mm
Aperture priority
No
Yes
Max. aperture
f2.8
f2.9 - f6.7
Metering
Centre weighted
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1/2 sec
30 sec
Max. shutter speed
1/6458 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical
None
White balance presets
5
6
Screen size
1.5"
3"
Screen resolution
460,000 dots
Video capture
Max. video resolution
1920x1080
Storage types
Secure Digital
SD/SDHC
USB
USB 1.1
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4x AAA
Rechargeable Li-ion Battery LB-070
Weight
110 g
604 g
Dimensions
97 x 33 x 63 mm
124.7 x 89 x 113.8 mm
Year
2004
2014
Choose cameras to compare
Popular comparisons:
- Jenoptik JD C 3.1 LCD vs. Jenoptik JD C 1.3 LCD
- Jenoptik JD C 3.1 LCD vs. Jenoptik JD C 5.0 SL
- Jenoptik JD C 3.1 LCD vs. Jenoptik JD C 3.1 z3
- Jenoptik JD C 3.1 LCD vs. Jenoptik JD 3.3 AF
- Jenoptik JD C 3.1 LCD vs. HP Photosmart 320
- Jenoptik JD C 3.1 LCD vs. HP Photosmart M417
- Jenoptik JD C 3.1 LCD vs. Kodak PixPro AZ651
- Jenoptik JD C 3.1 LCD vs. HP Photosmart R507
- Jenoptik JD C 3.1 LCD vs. Epson PhotoPC 800
- Jenoptik JD C 3.1 LCD vs. Casio QV-300
- Jenoptik JD C 3.1 LCD vs. Kodak EasyShare DX3500
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Jenoptik JD C 3.1 LCD diagonal
The diagonal of JD C 3.1 LCD sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Kodak AZ651 diagonal
The diagonal of AZ651 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
JD C 3.1 LCD sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
AZ651 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
JD C 3.1 LCD pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 2044 pixels
Sensor resolution width = 2044 pixels
| Pixel pitch = | 6.40 | × 1000 | = 3.13 µm |
| 2044 |
AZ651 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 5244 pixels
Sensor resolution width = 5244 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.17 µm |
| 5244 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
JD C 3.1 LCD pixel area
Pixel pitch = 3.13 µm
Pixel area = 3.13² = 9.8 µm²
Pixel area = 3.13² = 9.8 µm²
AZ651 pixel area
Pixel pitch = 1.17 µm
Pixel area = 1.17² = 1.37 µm²
Pixel area = 1.17² = 1.37 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
JD C 3.1 LCD pixel density
Sensor resolution width = 2044 pixels
Sensor width = 0.64 cm
Pixel density = (2044 / 0.64)² / 1000000 = 10.2 MP/cm²
Sensor width = 0.64 cm
Pixel density = (2044 / 0.64)² / 1000000 = 10.2 MP/cm²
AZ651 pixel density
Sensor resolution width = 5244 pixels
Sensor width = 0.616 cm
Pixel density = (5244 / 0.616)² / 1000000 = 72.47 MP/cm²
Sensor width = 0.616 cm
Pixel density = (5244 / 0.616)² / 1000000 = 72.47 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
JD C 3.1 LCD sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 3.14
Resolution horizontal: X × r = 1537 × 1.33 = 2044
Resolution vertical: X = 1537
Sensor resolution = 2044 x 1537
Sensor height = 4.80 mm
Effective megapixels = 3.14
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 1537
Sensor resolution = 2044 x 1537
AZ651 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 20.68
Resolution horizontal: X × r = 3943 × 1.33 = 5244
Resolution vertical: X = 3943
Sensor resolution = 5244 x 3943
Sensor height = 4.62 mm
Effective megapixels = 20.68
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3943
Sensor resolution = 5244 x 3943
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
JD C 3.1 LCD crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
AZ651 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
JD C 3.1 LCD equivalent aperture
Crop factor = 5.41
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.41 = f15.1
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.41 = f15.1
AZ651 equivalent aperture
Crop factor = 5.62
Aperture = f2.9 - f6.7
35-mm equivalent aperture = (f2.9 - f6.7) × 5.62 = f16.3 - f37.7
Aperture = f2.9 - f6.7
35-mm equivalent aperture = (f2.9 - f6.7) × 5.62 = f16.3 - f37.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.