Kodak EasyShare C143 vs. Canon PowerShot G11

Comparison

change cameras »

Kodak EasyShare C143

Canon PowerShot G11

check price »

Megapixels

12.50

10.00

Max. image resolution

4000 x 3000

3648 x 2736

Sensor

Sensor type

CCD

Sensor size

1/2.3" (~ 6.16 x 4.62 mm)

1/1.7" (~ 7.53 x 5.64 mm)

Sensor resolution

4078 x 3066

3661 x 2732

Diagonal

7.70 mm

9.41 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	1.49
(ratio)

Kodak EasyShare C143		Canon PowerShot G11

Surface area:

28.46 mm²

42.47 mm²

Difference: 14.01 mm² (49%)

G11 sensor is approx. 1.49x bigger than C143 sensor.

Pixel pitch

1.51 µm

2.06 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0.55 µm (36%)

Pixel pitch of G11 is approx. 36% higher than pixel pitch of C143.

Pixel area

2.28 µm²

4.24 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 1.96 µm² (86%)

A pixel on Canon G11 sensor is approx. 86% bigger than a pixel on Kodak C143.

Pixel density

43.83 MP/cm²

23.64 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 20.19 µm (85%)

Kodak C143 has approx. 85% higher pixel density than Canon G11.

To learn about the accuracy of these numbers, click here.

Specs

Kodak C143

Canon G11

Crop factor

5.62

4.6

Total megapixels

10.40

Effective megapixels

10.00

Optical zoom

Yes

Digital zoom

Yes

ISO sensitivity

Auto

Auto, 80 ,100, 200, 400, 800, 1600, 3200

RAW

Manual focus

Normal focus range

10 cm

50 cm

Macro focus range

10 cm

1 cm

Focal length (35mm equiv.)

32 - 96 mm

28 - 140 mm

Aperture priority

Yes

Max. aperture

f2.8 - f4.5

Max. aperture (35mm equiv.)

n/a

f12.9 - f20.7

Metering

Centre weighted, Multi-pattern

Multi, Center-weighted, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

1/8 sec

15 sec

Max. shutter speed

1/1400 sec

1/4000 sec

Built-in flash

External flash

Viewfinder

None

Optical (tunnel)

White balance presets

Screen size

2.7"

2.8"

Screen resolution

230,000 dots

461,000 dots

Video capture

Max. video resolution

Storage types

SDHC, Secure Digital

SD, SDHC, MMC, MMCplus, HC MMCplus card

USB

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

2x AA

Lithium-Ion NB-7L rechargeable battery

Weight

172 g

375 g

Dimensions

93.8 x 62.0 x 30.1 mm

112 x 76 x 48 mm

Year

2010

2009

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Kodak C143 diagonal

The diagonal of C143 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm

Diagonal = √

6.16² + 4.62²

= 7.70 mm

Canon G11 diagonal

The diagonal of G11 sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of that value - 9.41 mm. If you want to know why, see sensor sizes.

w = 7.53 mm
h = 5.64 mm

Diagonal = √

7.53² + 5.64²

= 9.41 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

C143 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²

G11 sensor area

Width = 7.53 mm
Height = 5.64 mm

Surface area = 7.53 × 5.64 = 42.47 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

C143 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 4078 pixels

Pixel pitch =	6.16	× 1000	= 1.51 µm
	4078

G11 pixel pitch

Sensor width = 7.53 mm
Sensor resolution width = 3661 pixels

Pixel pitch =	7.53	× 1000	= 2.06 µm
	3661

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

C143 pixel area

Pixel pitch = 1.51 µm

Pixel area = 1.51² = 2.28 µm²

G11 pixel area

Pixel pitch = 2.06 µm

Pixel area = 2.06² = 4.24 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

C143 pixel density

Sensor resolution width = 4078 pixels
Sensor width = 0.616 cm

Pixel density = (4078 / 0.616)² / 1000000 = 43.83 MP/cm²

G11 pixel density

Sensor resolution width = 3661 pixels
Sensor width = 0.753 cm

Pixel density = (3661 / 0.753)² / 1000000 = 23.64 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

C143 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.50

r = 6.16/4.62 = 1.33

X = √	12.50 × 1000000	= 3066
	1.33

Resolution horizontal: X × r = 3066 × 1.33 = 4078
Resolution vertical: X = 3066

Sensor resolution = 4078 x 3066

G11 sensor resolution

Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 10.00

r = 7.53/5.64 = 1.34

X = √	10.00 × 1000000	= 2732
	1.34

Resolution horizontal: X × r = 2732 × 1.34 = 3661
Resolution vertical: X = 2732

Sensor resolution = 3661 x 2732

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

C143 crop factor

Sensor diagonal in mm = 7.70 mm

Crop factor =	43.27	= 5.62
	7.70

G11 crop factor

Sensor diagonal in mm = 9.41 mm

Crop factor =	43.27	= 4.6
	9.41

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

C143 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Kodak C143, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Kodak C143 is 5.62

G11 equivalent aperture

Crop factor = 4.6
Aperture = f2.8 - f4.5

35-mm equivalent aperture = (f2.8 - f4.5) × 4.6 = f12.9 - f20.7

More comparisons of Kodak C143:

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.