Konica-Minolta DiMAGE X1 vs. Canon EOS 6D
Comparison
change cameras » | |||||
|
vs |
|
|||
Konica-Minolta DiMAGE X1 | Canon EOS 6D | ||||
check price » | check price » |
Megapixels
8.30
20.20
Max. image resolution
3264 x 2448
5472 x 3648
Sensor
Sensor type
CCD
CMOS
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
35.8 x 23.9 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 22.58 |
(ratio) | ||
Konica-Minolta DiMAGE X1 | Canon EOS 6D |
Surface area:
37.90 mm² | vs | 855.62 mm² |
Difference: 817.72 mm² (2158%)
6D sensor is approx. 22.58x bigger than DiMAGE X1 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 7 years between Konica-Minolta DiMAGE X1 (2005) and Canon 6D (2012).
Seven years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 37.67 µm² (822%)
A pixel on Canon 6D sensor is approx. 822% bigger than a pixel on Konica-Minolta DiMAGE X1.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Konica-Minolta DiMAGE X1
Canon 6D
Total megapixels
20.60
Effective megapixels
20.20
Optical zoom
3x
Digital zoom
Yes
ISO sensitivity
Auto, 50, 100, 200
Auto, 100 - 25600 in 1/3 stops, plus 50, 51200, 102400 as option
RAW
Manual focus
Normal focus range
10 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
37 - 111 mm
Aperture priority
No
Yes
Max. aperture
f3.5 - f3.8
Metering
Multi-segment, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1 sec
30 sec
Max. shutter speed
1/1250 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
Optical (pentaprism)
White balance presets
5
6
Screen size
2.5"
3"
Screen resolution
118,000 dots
1,040,000 dots
Video capture
Max. video resolution
1920x1080 (30p/25p/24p)
Storage types
MultiMedia, Secure Digital
SD/SDHC/SDXC
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion
Lithium-Ion LP-E6 rechargeable battery
Weight
135 g
770 g
Dimensions
95 x 68 x 19.5 mm
144.5 x 110.5 x 71.2 mm
Year
2005
2012
Choose cameras to compare
Popular comparisons:
- Konica-Minolta DiMAGE X1 vs. Konica-Minolta DiMAGE Xg
- Konica-Minolta DiMAGE X1 vs. Konica-Minolta DiMAGE X31
- Konica-Minolta DiMAGE X1 vs. Fujifilm FinePix IS-1
- Konica-Minolta DiMAGE X1 vs. Konica-Minolta DiMAGE X60
- Konica-Minolta DiMAGE X1 vs. Panasonic Lumix DMC-FS10
- Konica-Minolta DiMAGE X1 vs. Nikon D5200
- Konica-Minolta DiMAGE X1 vs. Nikon Coolpix P510
- Konica-Minolta DiMAGE X1 vs. Konica-Minolta DiMAGE X50
- Konica-Minolta DiMAGE X1 vs. Minolta DiMAGE Xt
- Konica-Minolta DiMAGE X1 vs. Nikon Coolpix W300
- Konica-Minolta DiMAGE X1 vs. Canon PowerShot SX740 HS
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Konica-Minolta DiMAGE X1 diagonal
The diagonal of DiMAGE X1 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Canon 6D diagonal
w = 35.80 mm
h = 23.90 mm
h = 23.90 mm
Diagonal = √ | 35.80² + 23.90² | = 43.04 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DiMAGE X1 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
6D sensor area
Width = 35.80 mm
Height = 23.90 mm
Surface area = 35.80 × 23.90 = 855.62 mm²
Height = 23.90 mm
Surface area = 35.80 × 23.90 = 855.62 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DiMAGE X1 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 3322 pixels
Sensor resolution width = 3322 pixels
Pixel pitch = | 7.11 | × 1000 | = 2.14 µm |
3322 |
6D pixel pitch
Sensor width = 35.80 mm
Sensor resolution width = 5505 pixels
Sensor resolution width = 5505 pixels
Pixel pitch = | 35.80 | × 1000 | = 6.5 µm |
5505 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DiMAGE X1 pixel area
Pixel pitch = 2.14 µm
Pixel area = 2.14² = 4.58 µm²
Pixel area = 2.14² = 4.58 µm²
6D pixel area
Pixel pitch = 6.5 µm
Pixel area = 6.5² = 42.25 µm²
Pixel area = 6.5² = 42.25 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DiMAGE X1 pixel density
Sensor resolution width = 3322 pixels
Sensor width = 0.711 cm
Pixel density = (3322 / 0.711)² / 1000000 = 21.83 MP/cm²
Sensor width = 0.711 cm
Pixel density = (3322 / 0.711)² / 1000000 = 21.83 MP/cm²
6D pixel density
Sensor resolution width = 5505 pixels
Sensor width = 3.58 cm
Pixel density = (5505 / 3.58)² / 1000000 = 2.36 MP/cm²
Sensor width = 3.58 cm
Pixel density = (5505 / 3.58)² / 1000000 = 2.36 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DiMAGE X1 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 8.30
Resolution horizontal: X × r = 2498 × 1.33 = 3322
Resolution vertical: X = 2498
Sensor resolution = 3322 x 2498
Sensor height = 5.33 mm
Effective megapixels = 8.30
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2498
Sensor resolution = 3322 x 2498
6D sensor resolution
Sensor width = 35.80 mm
Sensor height = 23.90 mm
Effective megapixels = 20.20
Resolution horizontal: X × r = 3670 × 1.5 = 5505
Resolution vertical: X = 3670
Sensor resolution = 5505 x 3670
Sensor height = 23.90 mm
Effective megapixels = 20.20
r = 35.80/23.90 = 1.5 |
|
Resolution vertical: X = 3670
Sensor resolution = 5505 x 3670
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DiMAGE X1 crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
6D crop factor
Sensor diagonal in mm = 43.04 mm
Crop factor = | 43.27 | = 1.01 |
43.04 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DiMAGE X1 equivalent aperture
Crop factor = 4.87
Aperture = f3.5 - f3.8
35-mm equivalent aperture = (f3.5 - f3.8) × 4.87 = f17 - f18.5
Aperture = f3.5 - f3.8
35-mm equivalent aperture = (f3.5 - f3.8) × 4.87 = f17 - f18.5
6D equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 6D, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 6D is 1.01
Crop factor for Canon 6D is 1.01
More comparisons of Konica-Minolta DiMAGE X1:
- Konica-Minolta DiMAGE X1 vs. HP Photosmart M22
- Konica-Minolta DiMAGE X1 vs. Sony Cyber-shot DSC-HX400
- Konica-Minolta DiMAGE X1 vs. Konica-Minolta DiMAGE G600
- Konica-Minolta DiMAGE X1 vs. Nikon Coolpix 7600
- Konica-Minolta DiMAGE X1 vs. Kodak EasyShare C360
- Konica-Minolta DiMAGE X1 vs. Minolta DiMAGE X
- Konica-Minolta DiMAGE X1 vs. Ricoh GR Digital 4
- Konica-Minolta DiMAGE X1 vs. Sony Cyber-shot DSC-W5
- Konica-Minolta DiMAGE X1 vs. Konica-Minolta DiMAGE A2
- Konica-Minolta DiMAGE X1 vs. Canon EOS 550D
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.