Konica-Minolta DiMAGE Z6 vs. AgfaPhoto sensor 830s
Comparison
change cameras » | |||||
|
vs |
|
|||
Konica-Minolta DiMAGE Z6 | AgfaPhoto sensor 830s | ||||
check price » | check price » |
Megapixels
6.40
8.00
Max. image resolution
2816 x 2112
3264 x 2448
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Konica-Minolta DiMAGE Z6 | AgfaPhoto sensor 830s |
Surface area:
24.84 mm² | vs | 24.84 mm² |
Difference: 0 mm² (0%)
DiMAGE Z6 and sensor 830s sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Konica-Minolta DiMAGE Z6 (2005) and AgfaPhoto sensor 830s (2009).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.78 µm² (25%)
A pixel on Konica-Minolta DiMAGE Z6 sensor is approx. 25% bigger than a pixel on AgfaPhoto sensor 830s.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Konica-Minolta DiMAGE Z6
AgfaPhoto sensor 830s
Total megapixels
Effective megapixels
Optical zoom
12x
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 320
Auto, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
60 cm
40 cm
Macro focus range
1 cm
5 cm
Focal length (35mm equiv.)
35 - 420 mm
36 - 108 mm
Aperture priority
Yes
No
Max. aperture
f2.8 - f4.5
f2.8 - f4.8
Metering
Centre weighted, Multi-segment, Spot
Multi Spot, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/2 EV steps)
Shutter priority
Yes
No
Min. shutter speed
15 sec
4 sec
Max. shutter speed
1/1000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Electronic
None
White balance presets
7
7
Screen size
2"
2.4"
Screen resolution
114,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
SDHC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
2x AA
Weight
340 g
120 g
Dimensions
109 x 80 x 84 mm
91.7 x 30 x 61.5 mm
Year
2005
2009
Choose cameras to compare
Popular comparisons:
- Konica-Minolta DiMAGE Z6 vs. Konica-Minolta DiMAGE Z5
- Konica-Minolta DiMAGE Z6 vs. Sony Cyber-shot DSC-H2
- Konica-Minolta DiMAGE Z6 vs. Fujifilm FinePix S100fs
- Konica-Minolta DiMAGE Z6 vs. Nikon Coolpix P7000
- Konica-Minolta DiMAGE Z6 vs. Konica-Minolta DiMAGE A200
- Konica-Minolta DiMAGE Z6 vs. Canon PowerShot S3 IS
- Konica-Minolta DiMAGE Z6 vs. Sony Cyber-shot DSC-S800
- Konica-Minolta DiMAGE Z6 vs. AgfaPhoto ePhoto 1280
- Konica-Minolta DiMAGE Z6 vs. Sony Cyber-shot DSC-HX300
- Konica-Minolta DiMAGE Z6 vs. Olympus C-720 UZ
- Konica-Minolta DiMAGE Z6 vs. Panasonic Lumix DMC-FZ20
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Konica-Minolta DiMAGE Z6 diagonal
The diagonal of DiMAGE Z6 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
AgfaPhoto sensor 830s diagonal
The diagonal of sensor 830s sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DiMAGE Z6 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
sensor 830s sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DiMAGE Z6 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2918 pixels
Sensor resolution width = 2918 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.97 µm |
2918 |
sensor 830s pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3262 pixels
Sensor resolution width = 3262 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.76 µm |
3262 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DiMAGE Z6 pixel area
Pixel pitch = 1.97 µm
Pixel area = 1.97² = 3.88 µm²
Pixel area = 1.97² = 3.88 µm²
sensor 830s pixel area
Pixel pitch = 1.76 µm
Pixel area = 1.76² = 3.1 µm²
Pixel area = 1.76² = 3.1 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DiMAGE Z6 pixel density
Sensor resolution width = 2918 pixels
Sensor width = 0.575 cm
Pixel density = (2918 / 0.575)² / 1000000 = 25.75 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2918 / 0.575)² / 1000000 = 25.75 MP/cm²
sensor 830s pixel density
Sensor resolution width = 3262 pixels
Sensor width = 0.575 cm
Pixel density = (3262 / 0.575)² / 1000000 = 32.18 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3262 / 0.575)² / 1000000 = 32.18 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DiMAGE Z6 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.40
Resolution horizontal: X × r = 2194 × 1.33 = 2918
Resolution vertical: X = 2194
Sensor resolution = 2918 x 2194
Sensor height = 4.32 mm
Effective megapixels = 6.40
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2194
Sensor resolution = 2918 x 2194
sensor 830s sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 8.00
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Sensor height = 4.32 mm
Effective megapixels = 8.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DiMAGE Z6 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
sensor 830s crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DiMAGE Z6 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 6.02 = f16.9 - f27.1
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 6.02 = f16.9 - f27.1
sensor 830s equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 6.02 = f16.9 - f28.9
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 6.02 = f16.9 - f28.9
More comparisons of Konica-Minolta DiMAGE Z6:
- Konica-Minolta DiMAGE Z6 vs. Canon PowerShot SX120 IS
- Konica-Minolta DiMAGE Z6 vs. Nikon Coolpix 4100
- Konica-Minolta DiMAGE Z6 vs. Samsung GX-1L
- Konica-Minolta DiMAGE Z6 vs. Sony Cyber-shot DSC-HX9V
- Konica-Minolta DiMAGE Z6 vs. Panasonic Lumix DMC-FZ7
- Konica-Minolta DiMAGE Z6 vs. Fujifilm FinePix HS50 EXR
- Konica-Minolta DiMAGE Z6 vs. Minolta DiMAGE 5
- Konica-Minolta DiMAGE Z6 vs. Canon EOS 500D
- Konica-Minolta DiMAGE Z6 vs. Konica-Minolta DiMAGE G600
- Konica-Minolta DiMAGE Z6 vs. Pentax Optio LS1100
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.