Leica Digilux vs. Leica Digilux 2
Comparison
change cameras » | |||||
|
vs |
|
|||
Leica Digilux | Leica Digilux 2 | ||||
check price » | check price » |
Megapixels
1.30
4.90
Max. image resolution
1280 x 1024
2560 x 1920
Sensor
Sensor type
CCD
CCD
Sensor size
1/2" (~ 6.4 x 4.8 mm)
2/3" (~ 8.8 x 6.6 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.89 |
(ratio) | ||
Leica Digilux | Leica Digilux 2 |
Surface area:
30.72 mm² | vs | 58.08 mm² |
Difference: 27.36 mm² (89%)
Digilux 2 sensor is approx. 1.89x bigger than Digilux sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between Leica Digilux (1998) and Leica Digilux 2 (2003).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 11.82 µm² (99%)
A pixel on Leica Digilux sensor is approx. 99% bigger than a pixel on Leica Digilux 2.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Leica Digilux
Leica Digilux 2
Total megapixels
1.50
5.20
Effective megapixels
1.30
4.90
Optical zoom
1x
3.2x
Digital zoom
Yes
Yes
ISO sensitivity
100
100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
30 cm
Macro focus range
9 cm
30 cm
Focal length (35mm equiv.)
35 mm
28 - 90 mm
Aperture priority
No
Yes
Max. aperture
f3.2 - f8.0
f2.0 - f2.4
Metering
Multi, Center-weighted, Spot
Centre weighted, Multi-segment, Spot
Exposure compensation
-0.9 - +1.5 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1/4 sec
8 sec
Max. shutter speed
1/1000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Electronic
White balance presets
4
7
Screen size
2"
2.5"
Screen resolution
110,000 dots
211,000 dots
Video capture
Max. video resolution
Storage types
SmartMedia
MultiMedia, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion (NP-100)
Lithium-Ion 1400 mAh supplied
Weight
260 g
630 g
Dimensions
80 x 101 x 33 mm
135 x 82 x 103 mm
Year
1998
2003
Choose cameras to compare
Popular comparisons:
- Leica Digilux vs. Leica Digilux Zoom
- Leica Digilux vs. Fujifilm X20
- Leica Digilux vs. Sony Alpha NEX-7
- Leica Digilux vs. Canon EOS 7D
- Leica Digilux vs. Leica D-LUX 5
- Leica Digilux vs. Leica Digilux 1
- Leica Digilux vs. Leica D-Lux 7
- Leica Digilux vs. Nikon D40
- Leica Digilux vs. Canon EOS 5D Mark III
- Leica Digilux vs. Leica Digilux 2
- Leica Digilux vs. Leica D-LUX 2
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Leica Digilux diagonal
The diagonal of Digilux sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Leica Digilux 2 diagonal
The diagonal of Digilux 2 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Digilux sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Digilux 2 sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Digilux pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1315 pixels
Sensor resolution width = 1315 pixels
Pixel pitch = | 6.40 | × 1000 | = 4.87 µm |
1315 |
Digilux 2 pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 2552 pixels
Sensor resolution width = 2552 pixels
Pixel pitch = | 8.80 | × 1000 | = 3.45 µm |
2552 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Digilux pixel area
Pixel pitch = 4.87 µm
Pixel area = 4.87² = 23.72 µm²
Pixel area = 4.87² = 23.72 µm²
Digilux 2 pixel area
Pixel pitch = 3.45 µm
Pixel area = 3.45² = 11.9 µm²
Pixel area = 3.45² = 11.9 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Digilux pixel density
Sensor resolution width = 1315 pixels
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
Digilux 2 pixel density
Sensor resolution width = 2552 pixels
Sensor width = 0.88 cm
Pixel density = (2552 / 0.88)² / 1000000 = 8.41 MP/cm²
Sensor width = 0.88 cm
Pixel density = (2552 / 0.88)² / 1000000 = 8.41 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Digilux sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.30
Resolution horizontal: X × r = 989 × 1.33 = 1315
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Sensor height = 4.80 mm
Effective megapixels = 1.30
r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Digilux 2 sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 4.90
Resolution horizontal: X × r = 1919 × 1.33 = 2552
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
Sensor height = 6.60 mm
Effective megapixels = 4.90
r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Digilux crop factor
Sensor diagonal in mm = 8.00 mm
Crop factor = | 43.27 | = 5.41 |
8.00 |
Digilux 2 crop factor
Sensor diagonal in mm = 11.00 mm
Crop factor = | 43.27 | = 3.93 |
11.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Digilux equivalent aperture
Crop factor = 5.41
Aperture = f3.2 - f8.0
35-mm equivalent aperture = (f3.2 - f8.0) × 5.41 = f17.3 - f43.3
Aperture = f3.2 - f8.0
35-mm equivalent aperture = (f3.2 - f8.0) × 5.41 = f17.3 - f43.3
Digilux 2 equivalent aperture
Crop factor = 3.93
Aperture = f2.0 - f2.4
35-mm equivalent aperture = (f2.0 - f2.4) × 3.93 = f7.9 - f9.4
Aperture = f2.0 - f2.4
35-mm equivalent aperture = (f2.0 - f2.4) × 3.93 = f7.9 - f9.4
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.