Leica M11 vs. Leica X2
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Leica M11 | Leica X2 | ||||
| check price » | check price » | ||||
Megapixels
60.30
16.20
Max. image resolution
9528 x 6328
4928 x 3264
Sensor
Sensor type
CMOS
CMOS
Sensor size
36 x 24 mm
23.6 x 15.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 2.32 | : | 1 |
| (ratio) | ||
| Leica M11 | Leica X2 | |
Surface area:
| 864.00 mm² | vs | 372.88 mm² |
Difference: 491.12 mm² (132%)
M11 sensor is approx. 2.32x bigger than X2 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Leica M11 ( 2022) and Leica X2 (2012).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 8.68 µm² (60%)
A pixel on Leica X2 sensor is approx. 60% bigger than a pixel on Leica M11.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Leica M11
Leica X2
Total megapixels
16.50
Effective megapixels
60.30
16.20
Optical zoom
1x
Digital zoom
No
No
ISO sensitivity
Auto, 64-50000
Auto, 100, 200, 400, 800, 1600, 3200, 6400, 12500
RAW
Manual focus
Normal focus range
30 cm
Macro focus range
30 cm
Focal length (35mm equiv.)
36 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±3 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
3600 sec
30 sec
Max. shutter speed
1/4000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (rangefinder)
Electronic (optional)
White balance presets
8
5
Screen size
3"
2.7"
Screen resolution
2,332,800 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SD/SDHC/SDXC, UHS-II
SD/SDHC card
USB
USB 3.0 (5 GBit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
BC-SCL7 lithium-ion battery
Lithium-Ion rechargeable battery
Weight
640 g
345 g
Dimensions
139 x 38.5 x 80 mm
124 x 69 x 52 mm
Year
2022
2012
Choose cameras to compare
Popular comparisons:
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Leica M11 diagonal
w = 36.00 mm
h = 24.00 mm
h = 24.00 mm
| Diagonal = √ | 36.00² + 24.00² | = 43.27 mm |
Leica X2 diagonal
w = 23.60 mm
h = 15.80 mm
h = 15.80 mm
| Diagonal = √ | 23.60² + 15.80² | = 28.40 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
M11 sensor area
Width = 36.00 mm
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
X2 sensor area
Width = 23.60 mm
Height = 15.80 mm
Surface area = 23.60 × 15.80 = 372.88 mm²
Height = 15.80 mm
Surface area = 23.60 × 15.80 = 372.88 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
M11 pixel pitch
Sensor width = 36.00 mm
Sensor resolution width = 9510 pixels
Sensor resolution width = 9510 pixels
| Pixel pitch = | 36.00 | × 1000 | = 3.79 µm |
| 9510 |
X2 pixel pitch
Sensor width = 23.60 mm
Sensor resolution width = 4913 pixels
Sensor resolution width = 4913 pixels
| Pixel pitch = | 23.60 | × 1000 | = 4.8 µm |
| 4913 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
M11 pixel area
Pixel pitch = 3.79 µm
Pixel area = 3.79² = 14.36 µm²
Pixel area = 3.79² = 14.36 µm²
X2 pixel area
Pixel pitch = 4.8 µm
Pixel area = 4.8² = 23.04 µm²
Pixel area = 4.8² = 23.04 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
M11 pixel density
Sensor resolution width = 9510 pixels
Sensor width = 3.6 cm
Pixel density = (9510 / 3.6)² / 1000000 = 6.98 MP/cm²
Sensor width = 3.6 cm
Pixel density = (9510 / 3.6)² / 1000000 = 6.98 MP/cm²
X2 pixel density
Sensor resolution width = 4913 pixels
Sensor width = 2.36 cm
Pixel density = (4913 / 2.36)² / 1000000 = 4.33 MP/cm²
Sensor width = 2.36 cm
Pixel density = (4913 / 2.36)² / 1000000 = 4.33 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
M11 sensor resolution
Sensor width = 36.00 mm
Sensor height = 24.00 mm
Effective megapixels = 60.30
Resolution horizontal: X × r = 6340 × 1.5 = 9510
Resolution vertical: X = 6340
Sensor resolution = 9510 x 6340
Sensor height = 24.00 mm
Effective megapixels = 60.30
| r = 36.00/24.00 = 1.5 |
|
Resolution vertical: X = 6340
Sensor resolution = 9510 x 6340
X2 sensor resolution
Sensor width = 23.60 mm
Sensor height = 15.80 mm
Effective megapixels = 16.20
Resolution horizontal: X × r = 3297 × 1.49 = 4913
Resolution vertical: X = 3297
Sensor resolution = 4913 x 3297
Sensor height = 15.80 mm
Effective megapixels = 16.20
| r = 23.60/15.80 = 1.49 |
|
Resolution vertical: X = 3297
Sensor resolution = 4913 x 3297
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
M11 crop factor
Sensor diagonal in mm = 43.27 mm
| Crop factor = | 43.27 | = 1 |
| 43.27 |
X2 crop factor
Sensor diagonal in mm = 28.40 mm
| Crop factor = | 43.27 | = 1.52 |
| 28.40 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
M11 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Leica M11, take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Leica M11 is 1, the equivalent aperture is aperture.
Since crop factor for Leica M11 is 1, the equivalent aperture is aperture.
X2 equivalent aperture
Crop factor = 1.52
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 1.52 = f4.3
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 1.52 = f4.3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.