Leica Q3 vs. Canon EOS R5
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Leica Q3 | Canon EOS R5 | ||||
| check price » | check price » | ||||
Megapixels
60.30
45.00
Max. image resolution
9520 x 6336
8192 x 5464
Sensor
Sensor type
CMOS
CMOS
Sensor size
36 x 24 mm
36 x 24 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Leica Q3 | Canon EOS R5 | |
Surface area:
| 864.00 mm² | vs | 864.00 mm² |
Difference: 0 mm² (0%)
Q3 and R5 sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Leica Q3 (2023) and Canon R5 (2020).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 4.82 µm² (34%)
A pixel on Canon R5 sensor is approx. 34% bigger than a pixel on Leica Q3.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Leica Q3
Canon R5
Total megapixels
62.39
47.10
Effective megapixels
60.30
45.00
Optical zoom
1x
Digital zoom
Yes
ISO sensitivity
Auto, 50-100000
Auto, 100-51200 (extends to 50-102400)
RAW
Manual focus
Normal focus range
30 cm
Macro focus range
17 cm
Focal length (35mm equiv.)
28 mm
Aperture priority
Yes
Yes
Max. aperture
f1.7
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot, Partial
Exposure compensation
±3 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
120 sec
30 sec
Max. shutter speed
1/16000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
5
8
Screen size
3"
3.2"
Screen resolution
1,843,200 dots
2,100,000 dots
Video capture
Max. video resolution
8192x4320 (30p/25p/24p)
8192x4320 (30p/24/23.98p)
Storage types
SD/SDHC/SDXC, UHS-II
SD/SDHC/SDXC, CFexpress
USB
USB 3.2 (10 GBit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
BP-SCL6 Lithium-ion battery
LP-E6NH lithium-ion battery
Weight
743 g
738 g
Dimensions
130 x 80.3 x 92.6 mm
138.5 x 97.5 x 88 mm
Year
2023
2020
Choose cameras to compare
Popular comparisons:
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Leica Q3 diagonal
w = 36.00 mm
h = 24.00 mm
h = 24.00 mm
| Diagonal = √ | 36.00² + 24.00² | = 43.27 mm |
Canon R5 diagonal
w = 36.00 mm
h = 24.00 mm
h = 24.00 mm
| Diagonal = √ | 36.00² + 24.00² | = 43.27 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Q3 sensor area
Width = 36.00 mm
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
R5 sensor area
Width = 36.00 mm
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
Q3 pixel pitch
Sensor width = 36.00 mm
Sensor resolution width = 9510 pixels
Sensor resolution width = 9510 pixels
| Pixel pitch = | 36.00 | × 1000 | = 3.79 µm |
| 9510 |
R5 pixel pitch
Sensor width = 36.00 mm
Sensor resolution width = 8216 pixels
Sensor resolution width = 8216 pixels
| Pixel pitch = | 36.00 | × 1000 | = 4.38 µm |
| 8216 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
Q3 pixel area
Pixel pitch = 3.79 µm
Pixel area = 3.79² = 14.36 µm²
Pixel area = 3.79² = 14.36 µm²
R5 pixel area
Pixel pitch = 4.38 µm
Pixel area = 4.38² = 19.18 µm²
Pixel area = 4.38² = 19.18 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
Q3 pixel density
Sensor resolution width = 9510 pixels
Sensor width = 3.6 cm
Pixel density = (9510 / 3.6)² / 1000000 = 6.98 MP/cm²
Sensor width = 3.6 cm
Pixel density = (9510 / 3.6)² / 1000000 = 6.98 MP/cm²
R5 pixel density
Sensor resolution width = 8216 pixels
Sensor width = 3.6 cm
Pixel density = (8216 / 3.6)² / 1000000 = 5.21 MP/cm²
Sensor width = 3.6 cm
Pixel density = (8216 / 3.6)² / 1000000 = 5.21 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Q3 sensor resolution
Sensor width = 36.00 mm
Sensor height = 24.00 mm
Effective megapixels = 60.30
Resolution horizontal: X × r = 6340 × 1.5 = 9510
Resolution vertical: X = 6340
Sensor resolution = 9510 x 6340
Sensor height = 24.00 mm
Effective megapixels = 60.30
| r = 36.00/24.00 = 1.5 |
|
Resolution vertical: X = 6340
Sensor resolution = 9510 x 6340
R5 sensor resolution
Sensor width = 36.00 mm
Sensor height = 24.00 mm
Effective megapixels = 45.00
Resolution horizontal: X × r = 5477 × 1.5 = 8216
Resolution vertical: X = 5477
Sensor resolution = 8216 x 5477
Sensor height = 24.00 mm
Effective megapixels = 45.00
| r = 36.00/24.00 = 1.5 |
|
Resolution vertical: X = 5477
Sensor resolution = 8216 x 5477
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
Q3 crop factor
Sensor diagonal in mm = 43.27 mm
| Crop factor = | 43.27 | = 1 |
| 43.27 |
R5 crop factor
Sensor diagonal in mm = 43.27 mm
| Crop factor = | 43.27 | = 1 |
| 43.27 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Q3 equivalent aperture
Crop factor = 1
Aperture = f1.7
35-mm equivalent aperture = (f1.7) × 1 = f1.7
Aperture = f1.7
35-mm equivalent aperture = (f1.7) × 1 = f1.7
R5 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon R5, take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Canon R5 is 1, the equivalent aperture is aperture.
Since crop factor for Canon R5 is 1, the equivalent aperture is aperture.
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.