Leica SL2 vs. Canon EOS 1200D

Comparison

change cameras »
SL2 image
vs
EOS 1200D image
Leica SL2 Canon EOS 1200D
check price » check price »
Megapixels
47.30
18.00
Max. image resolution
8368 x 5584
5184 x 3456

Sensor

Sensor type
CMOS
CMOS
Sensor size
36 x 24 mm
22.3 x 14.9 mm
Sensor resolution
8423 x 5615
5196 x 3464
Diagonal
43.27 mm
26.82 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
2.6 : 1
(ratio)
Leica SL2 Canon EOS 1200D
Surface area:
864.00 mm² vs 332.27 mm²
Difference: 531.73 mm² (160%)
SL2 sensor is approx. 2.6x bigger than 1200D sensor.
Note: You are comparing cameras of different generations. There is a 5 year gap between Leica SL2 (2019) and Canon 1200D (2014). All things being equal, newer sensor generations generally outperform the older.
Pixel pitch
4.27 µm
4.29 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.02 µm (0.5%)
Pixel pitch of 1200D is approx. 0.5% higher than pixel pitch of SL2.
Pixel area
18.23 µm²
18.4 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.17 µm² (0.9%)
A pixel on Canon 1200D sensor is approx. 0.9% bigger than a pixel on Leica SL2.
Pixel density
5.47 MP/cm²
5.43 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 0.04 µm (0.7%)
Leica SL2 has approx. 0.7% higher pixel density than Canon 1200D.
To learn about the accuracy of these numbers, click here.



Specs

Leica SL2
Canon 1200D
Crop factor
1
1.61
Total megapixels
18.70
Effective megapixels
47.30
18.00
Optical zoom
 
Digital zoom
No
ISO sensitivity
Auto, 100-50000 (extends to 50)
Auto, 100, 200, 400, 800, 1600, 3200, 6400
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Max. aperture (35mm equiv.)
n/a
n/a
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±3 EV (in 1/3 EV, 1/2 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
1800 sec
30 sec
Max. shutter speed
1/8000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic
Optical (pentamirror)
White balance presets
8
6
Screen size
3.2"
3"
Screen resolution
2,100,000 dots
460,000 dots
Video capture
Max. video resolution
4992x3744 (30p/​25p/​24p)
1920x1080 (30p/25p/24p)
Storage types
SD/SDHC/SDXC
SD/SDHC/SDXC
USB
USB 3.0 (5 GBit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
BP-SCL4 lithium-ion battery
Li-ion Battery LP-E10
Weight
928 g
480 g
Dimensions
146 x 107 x 42 mm
129.6 x 99.7 x 77.9 mm
Year
2019
2014




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Leica SL2 diagonal

w = 36.00 mm
h = 24.00 mm
Diagonal =  36.00² + 24.00²   = 43.27 mm

Canon 1200D diagonal

w = 22.30 mm
h = 14.90 mm
Diagonal =  22.30² + 14.90²   = 26.82 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

SL2 sensor area

Width = 36.00 mm
Height = 24.00 mm

Surface area = 36.00 × 24.00 = 864.00 mm²

1200D sensor area

Width = 22.30 mm
Height = 14.90 mm

Surface area = 22.30 × 14.90 = 332.27 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

SL2 pixel pitch

Sensor width = 36.00 mm
Sensor resolution width = 8423 pixels
Pixel pitch =   36.00  × 1000  = 4.27 µm
8423

1200D pixel pitch

Sensor width = 22.30 mm
Sensor resolution width = 5196 pixels
Pixel pitch =   22.30  × 1000  = 4.29 µm
5196


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

SL2 pixel area

Pixel pitch = 4.27 µm

Pixel area = 4.27² = 18.23 µm²

1200D pixel area

Pixel pitch = 4.29 µm

Pixel area = 4.29² = 18.4 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

SL2 pixel density

Sensor resolution width = 8423 pixels
Sensor width = 3.6 cm

Pixel density = (8423 / 3.6)² / 1000000 = 5.47 MP/cm²

1200D pixel density

Sensor resolution width = 5196 pixels
Sensor width = 2.23 cm

Pixel density = (5196 / 2.23)² / 1000000 = 5.43 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

SL2 sensor resolution

Sensor width = 36.00 mm
Sensor height = 24.00 mm
Effective megapixels = 47.30
r = 36.00/24.00 = 1.5
X =  47.30 × 1000000  = 5615
1.5
Resolution horizontal: X × r = 5615 × 1.5 = 8423
Resolution vertical: X = 5615

Sensor resolution = 8423 x 5615

1200D sensor resolution

Sensor width = 22.30 mm
Sensor height = 14.90 mm
Effective megapixels = 18.00
r = 22.30/14.90 = 1.5
X =  18.00 × 1000000  = 3464
1.5
Resolution horizontal: X × r = 3464 × 1.5 = 5196
Resolution vertical: X = 3464

Sensor resolution = 5196 x 3464


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


SL2 crop factor

Sensor diagonal in mm = 43.27 mm
Crop factor =   43.27  = 1
43.27

1200D crop factor

Sensor diagonal in mm = 26.82 mm
Crop factor =   43.27  = 1.61
26.82

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

SL2 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Leica SL2, take the aperture of the lens you're using and multiply it with crop factor.

Since crop factor for Leica SL2 is 1, the equivalent aperture is aperture.

1200D equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Canon 1200D, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Canon 1200D is 1.61

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.