Nikon Coolpix S9200 vs. Fujifilm FinePix F660EXR
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Nikon Coolpix S9200 | Fujifilm FinePix F660EXR | ||||
| check price » | check price » | ||||
Megapixels
16.00
16.00
Max. image resolution
4608 x 3456
4608 x 3456
Sensor
Sensor type
n/a
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2" (~ 6.4 x 4.8 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.08 |
| (ratio) | ||
| Nikon Coolpix S9200 | Fujifilm FinePix F660EXR | |
Surface area:
| 28.46 mm² | vs | 30.72 mm² |
Difference: 2.26 mm² (8%)
F660EXR sensor is approx. 1.08x bigger than S9200 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.13 µm² (7%)
A pixel on Fujifilm F660EXR sensor is approx. 7% bigger than a pixel on Nikon S9200.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Nikon S9200
Fujifilm F660EXR
Total megapixels
16.79
Effective megapixels
16.00
16.00
Optical zoom
15x
Digital zoom
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600, 3200 (6400 and 12800 with boost)
RAW
Manual focus
Normal focus range
45 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
24 - 360 mm
Aperture priority
Yes
Max. aperture
f3.5 - f5.3
Metering
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Min. shutter speed
8 sec
Max. shutter speed
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
7
Screen size
3"
Screen resolution
460,000 dots
Video capture
Max. video resolution
Storage types
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-ion NP-50A rechargeable battery
Weight
217 g
Dimensions
104 x 59 x 33 mm
Year
2012
2012
Choose cameras to compare
Popular comparisons:
- Nikon Coolpix S9200 vs. Canon PowerShot SX260 HS
- Nikon Coolpix S9200 vs. Nikon Coolpix S9300
- Nikon Coolpix S9200 vs. Nikon Coolpix S9500
- Nikon Coolpix S9200 vs. Sony Cyber-shot DSC-WX150
- Nikon Coolpix S9200 vs. Nikon Coolpix P310
- Nikon Coolpix S9200 vs. Nikon Coolpix S6400
- Nikon Coolpix S9200 vs. Nikon Coolpix S9050
- Nikon Coolpix S9200 vs. Nikon Coolpix S6300
- Nikon Coolpix S9200 vs. Fujifilm FinePix F660EXR
- Nikon Coolpix S9200 vs. Panasonic Lumix DMC-TZ25
- Nikon Coolpix S9200 vs. Sony Cyber-shot DSC-WX80
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Nikon S9200 diagonal
The diagonal of S9200 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Fujifilm F660EXR diagonal
The diagonal of F660EXR sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
S9200 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
F660EXR sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
S9200 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4612 pixels
Sensor resolution width = 4612 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.34 µm |
| 4612 |
F660EXR pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 4612 pixels
Sensor resolution width = 4612 pixels
| Pixel pitch = | 6.40 | × 1000 | = 1.39 µm |
| 4612 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
S9200 pixel area
Pixel pitch = 1.34 µm
Pixel area = 1.34² = 1.8 µm²
Pixel area = 1.34² = 1.8 µm²
F660EXR pixel area
Pixel pitch = 1.39 µm
Pixel area = 1.39² = 1.93 µm²
Pixel area = 1.39² = 1.93 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
S9200 pixel density
Sensor resolution width = 4612 pixels
Sensor width = 0.616 cm
Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²
F660EXR pixel density
Sensor resolution width = 4612 pixels
Sensor width = 0.64 cm
Pixel density = (4612 / 0.64)² / 1000000 = 51.93 MP/cm²
Sensor width = 0.64 cm
Pixel density = (4612 / 0.64)² / 1000000 = 51.93 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
S9200 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.00
Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Sensor height = 4.62 mm
Effective megapixels = 16.00
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
F660EXR sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 16.00
Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Sensor height = 4.80 mm
Effective megapixels = 16.00
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
S9200 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
F660EXR crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
S9200 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Nikon S9200, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Nikon S9200 is 5.62
Crop factor for Nikon S9200 is 5.62
F660EXR equivalent aperture
Crop factor = 5.41
Aperture = f3.5 - f5.3
35-mm equivalent aperture = (f3.5 - f5.3) × 5.41 = f18.9 - f28.7
Aperture = f3.5 - f5.3
35-mm equivalent aperture = (f3.5 - f5.3) × 5.41 = f18.9 - f28.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.