Olympus SP 570 UZ vs. Fujifilm FinePix HS10
Comparison
change cameras » | |||||
|
vs |
|
|||
Olympus SP 570 UZ | Fujifilm FinePix HS10 | ||||
check price » | check price » |
Megapixels
10.70
10.30
Max. image resolution
3648 x 2736
3648 x 2736
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.33" (~ 6.08 x 4.56 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.03 |
(ratio) | ||
Olympus SP 570 UZ | Fujifilm FinePix HS10 |
Surface area:
27.72 mm² | vs | 28.46 mm² |
Difference: 0.74 mm² (3%)
HS10 sensor is slightly bigger than SP 570 UZ sensor (only 3% difference).
Note: You are comparing cameras of different generations.
There is a 2 year gap between Olympus SP 570 UZ (2008) and Fujifilm HS10 (2010).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.17 µm² (7%)
A pixel on Fujifilm HS10 sensor is approx. 7% bigger than a pixel on Olympus SP 570 UZ.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Olympus SP 570 UZ
Fujifilm HS10
Total megapixels
Effective megapixels
10.30
Optical zoom
Yes
30x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400, 800, 1600, 3200, 6400
Auto, 100, 200, 400, 800, 1600, 3200, 6400
RAW
Manual focus
Normal focus range
10 cm
60 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
26 - 520 mm
24 - 720 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f4.5
f2.8 - f5.6
Metering
Centre weighted, ESP Digital, Spot
TTL 256-zones metering
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
480 sec
30 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
5
6
Screen size
2.7"
3"
Screen resolution
230,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
xD Picture card
SDHC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4x AA
4 x AA batteries (Alkaline, NiMH or Lithium)
Weight
365 g
666 g
Dimensions
116 x 78.5 x 78 mm
130.6 x 90.7 x 126 mm
Year
2008
2010
Choose cameras to compare
Popular comparisons:
- Olympus SP 570 UZ vs. Sony Cyber-shot DSC-HX50
- Olympus SP 570 UZ vs. Olympus SP 560 UZ
- Olympus SP 570 UZ vs. Canon PowerShot S5 IS
- Olympus SP 570 UZ vs. Fujifilm FinePix S2980
- Olympus SP 570 UZ vs. Olympus SP 810 UZ
- Olympus SP 570 UZ vs. Panasonic Lumix DMC-FZ38
- Olympus SP 570 UZ vs. Panasonic Lumix DMC-FZ50
- Olympus SP 570 UZ vs. Canon PowerShot SX20 IS
- Olympus SP 570 UZ vs. Panasonic Lumix DMC-FZ45
- Olympus SP 570 UZ vs. Sony Cyber-shot DSC-H200
- Olympus SP 570 UZ vs. Fujifilm FinePix S8600
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Olympus SP 570 UZ diagonal
The diagonal of SP 570 UZ sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Fujifilm HS10 diagonal
The diagonal of HS10 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
SP 570 UZ sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
HS10 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
SP 570 UZ pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 3772 pixels
Sensor resolution width = 3772 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.61 µm |
3772 |
HS10 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3701 pixels
Sensor resolution width = 3701 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.66 µm |
3701 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
SP 570 UZ pixel area
Pixel pitch = 1.61 µm
Pixel area = 1.61² = 2.59 µm²
Pixel area = 1.61² = 2.59 µm²
HS10 pixel area
Pixel pitch = 1.66 µm
Pixel area = 1.66² = 2.76 µm²
Pixel area = 1.66² = 2.76 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
SP 570 UZ pixel density
Sensor resolution width = 3772 pixels
Sensor width = 0.608 cm
Pixel density = (3772 / 0.608)² / 1000000 = 38.49 MP/cm²
Sensor width = 0.608 cm
Pixel density = (3772 / 0.608)² / 1000000 = 38.49 MP/cm²
HS10 pixel density
Sensor resolution width = 3701 pixels
Sensor width = 0.616 cm
Pixel density = (3701 / 0.616)² / 1000000 = 36.1 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3701 / 0.616)² / 1000000 = 36.1 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
SP 570 UZ sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 10.70
Resolution horizontal: X × r = 2836 × 1.33 = 3772
Resolution vertical: X = 2836
Sensor resolution = 3772 x 2836
Sensor height = 4.56 mm
Effective megapixels = 10.70
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 2836
Sensor resolution = 3772 x 2836
HS10 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.30
Resolution horizontal: X × r = 2783 × 1.33 = 3701
Resolution vertical: X = 2783
Sensor resolution = 3701 x 2783
Sensor height = 4.62 mm
Effective megapixels = 10.30
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 2783
Sensor resolution = 3701 x 2783
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
SP 570 UZ crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
HS10 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
SP 570 UZ equivalent aperture
Crop factor = 5.69
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 5.69 = f15.9 - f25.6
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 5.69 = f15.9 - f25.6
HS10 equivalent aperture
Crop factor = 5.62
Aperture = f2.8 - f5.6
35-mm equivalent aperture = (f2.8 - f5.6) × 5.62 = f15.7 - f31.5
Aperture = f2.8 - f5.6
35-mm equivalent aperture = (f2.8 - f5.6) × 5.62 = f15.7 - f31.5
More comparisons of Olympus SP 570 UZ:
- Olympus SP 570 UZ vs. Panasonic Lumix DMC-FZ18
- Olympus SP 570 UZ vs. Canon PowerShot G15
- Olympus SP 570 UZ vs. Canon EOS 500D
- Olympus SP 570 UZ vs. Fujifilm FinePix HS10
- Olympus SP 570 UZ vs. BenQ GH600
- Olympus SP 570 UZ vs. Olympus SP 500 UZ
- Olympus SP 570 UZ vs. Sony Cyber-shot DSC-HX200V
- Olympus SP 570 UZ vs. Sony Cyber-shot DSC-H9
- Olympus SP 570 UZ vs. Olympus SP 590 UZ
- Olympus SP 570 UZ vs. Olympus Stylus Tough TG-870
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.