Panasonic Lumix DC-G95 vs. Fujifilm FinePix F31fd
Comparison
change cameras » | |||||
|
vs |
|
|||
Panasonic Lumix DC-G95 | Fujifilm FinePix F31fd | ||||
check price » | check price » |
Megapixels
20.30
6.10
Max. image resolution
5184 x 3888
2848 x 2136
Sensor
Sensor type
CMOS
CCD
Sensor size
Four Thirds (17.3 x 13 mm)
1/1.7" (~ 7.53 x 5.64 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
5.3 | : | 1 |
(ratio) | ||
Panasonic Lumix DC-G95 | Fujifilm FinePix F31fd |
Surface area:
224.90 mm² | vs | 42.47 mm² |
Difference: 182.43 mm² (430%)
Lumix DC-G95 sensor is approx. 5.3x bigger than F31fd sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 13 years between Panasonic Lumix DC-G95 (2019) and
Fujifilm F31fd (2006).
Thirteen years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 4.17 µm² (60%)
A pixel on Panasonic Lumix DC-G95 sensor is approx. 60% bigger than a pixel on Fujifilm F31fd.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic Lumix DC-G95
Fujifilm F31fd
Total megapixels
21.77
6.30
Effective megapixels
20.30
6.10
Optical zoom
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 200-25600 (extends to 100)
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
60 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
36 - 108 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f5
Metering
Multi, Center-weighted, Spot
256-segment Matrix, Multi Spot, Spot
Exposure compensation
±5 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
60 sec
15 sec
Max. shutter speed
1/4000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Electronic
None
White balance presets
5
6
Screen size
3"
2.5"
Screen resolution
1,240,000 dots
230,000 dots
Video capture
Max. video resolution
3840x2160 (30p/24p)
Storage types
SD/SDHC/SDXC
xD Picture card
USB
USB 2.0 (480 Mbit/sec)
USB 1.0
HDMI
Wireless
GPS
Battery
Li-ion Battery Pack
Lithium-Ion (NP-95)
Weight
533 g
155 g
Dimensions
130.4 x 93.5 x 77.4 mm
92.7 x 56.7 x 27.8 mm
Year
2019
2006
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DC-G9
- Panasonic Lumix DC-G95 vs. Olympus OM-D E-M5 Mark III
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DMC-G85
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DC-GH5
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DC-GX9
- Panasonic Lumix DC-G95 vs. Sony Alpha a6400
- Panasonic Lumix DC-G95 vs. Canon EOS M50
- Panasonic Lumix DC-G95 vs. Olympus OM-D E-M1 Mark II
- Panasonic Lumix DC-G95 vs. Nikon Z50
- Panasonic Lumix DC-G95 vs. Fujifilm X-T30
- Panasonic Lumix DC-G95 vs. Sony Alpha a6500
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Panasonic Lumix DC-G95 diagonal
w = 17.30 mm
h = 13.00 mm
h = 13.00 mm
Diagonal = √ | 17.30² + 13.00² | = 21.64 mm |
Fujifilm F31fd diagonal
The diagonal of F31fd sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Lumix DC-G95 sensor area
Width = 17.30 mm
Height = 13.00 mm
Surface area = 17.30 × 13.00 = 224.90 mm²
Height = 13.00 mm
Surface area = 17.30 × 13.00 = 224.90 mm²
F31fd sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Lumix DC-G95 pixel pitch
Sensor width = 17.30 mm
Sensor resolution width = 5196 pixels
Sensor resolution width = 5196 pixels
Pixel pitch = | 17.30 | × 1000 | = 3.33 µm |
5196 |
F31fd pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 2860 pixels
Sensor resolution width = 2860 pixels
Pixel pitch = | 7.53 | × 1000 | = 2.63 µm |
2860 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Lumix DC-G95 pixel area
Pixel pitch = 3.33 µm
Pixel area = 3.33² = 11.09 µm²
Pixel area = 3.33² = 11.09 µm²
F31fd pixel area
Pixel pitch = 2.63 µm
Pixel area = 2.63² = 6.92 µm²
Pixel area = 2.63² = 6.92 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Lumix DC-G95 pixel density
Sensor resolution width = 5196 pixels
Sensor width = 1.73 cm
Pixel density = (5196 / 1.73)² / 1000000 = 9.02 MP/cm²
Sensor width = 1.73 cm
Pixel density = (5196 / 1.73)² / 1000000 = 9.02 MP/cm²
F31fd pixel density
Sensor resolution width = 2860 pixels
Sensor width = 0.753 cm
Pixel density = (2860 / 0.753)² / 1000000 = 14.43 MP/cm²
Sensor width = 0.753 cm
Pixel density = (2860 / 0.753)² / 1000000 = 14.43 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Lumix DC-G95 sensor resolution
Sensor width = 17.30 mm
Sensor height = 13.00 mm
Effective megapixels = 20.30
Resolution horizontal: X × r = 3907 × 1.33 = 5196
Resolution vertical: X = 3907
Sensor resolution = 5196 x 3907
Sensor height = 13.00 mm
Effective megapixels = 20.30
r = 17.30/13.00 = 1.33 |
|
Resolution vertical: X = 3907
Sensor resolution = 5196 x 3907
F31fd sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 6.10
Resolution horizontal: X × r = 2134 × 1.34 = 2860
Resolution vertical: X = 2134
Sensor resolution = 2860 x 2134
Sensor height = 5.64 mm
Effective megapixels = 6.10
r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 2134
Sensor resolution = 2860 x 2134
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Lumix DC-G95 crop factor
Sensor diagonal in mm = 21.64 mm
Crop factor = | 43.27 | = 2 |
21.64 |
F31fd crop factor
Sensor diagonal in mm = 9.41 mm
Crop factor = | 43.27 | = 4.6 |
9.41 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Lumix DC-G95 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Panasonic Lumix DC-G95, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Panasonic Lumix DC-G95 is 2
Crop factor for Panasonic Lumix DC-G95 is 2
F31fd equivalent aperture
Crop factor = 4.6
Aperture = f2.8 - f5
35-mm equivalent aperture = (f2.8 - f5) × 4.6 = f12.9 - f23
Aperture = f2.8 - f5
35-mm equivalent aperture = (f2.8 - f5) × 4.6 = f12.9 - f23
More comparisons of Panasonic Lumix DC-G95:
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DMC-G7
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DMC-GX85
- Panasonic Lumix DC-G95 vs. Sony Alpha A7 III
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DC-G100
- Panasonic Lumix DC-G95 vs. Canon EOS 200D
- Panasonic Lumix DC-G95 vs. Canon EOS 80D
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DC-LX100 II
- Panasonic Lumix DC-G95 vs. Nikon Z fc
- Panasonic Lumix DC-G95 vs. Panasonic Lumix DC-S5 II
- Panasonic Lumix DC-G95 vs. Sony Cyber-shot DSC-RX10 IV
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.