Panasonic Lumix DMC-F1 vs. Panasonic Lumix DMC-F3
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Panasonic Lumix DMC-F1 | Panasonic Lumix DMC-F3 | ||||
| check price » | check price » | ||||
Megapixels
3.20
12.10
Max. image resolution
2048 x 1536
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.12 |
| (ratio) | ||
| Panasonic Lumix DMC-F1 | Panasonic Lumix DMC-F3 | |
Surface area:
| 24.84 mm² | vs | 27.72 mm² |
Difference: 2.88 mm² (12%)
F3 sensor is approx. 1.12x bigger than F1 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 7 years between Panasonic F1 (2003) and Panasonic F3 (2010).
Seven years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 5.47 µm² (237%)
A pixel on Panasonic F1 sensor is approx. 237% bigger than a pixel on Panasonic F3.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic F1
Panasonic F3
Total megapixels
Effective megapixels
Optical zoom
Yes
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 80, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
10 cm
20 cm
Focal length (35mm equiv.)
35 - 105 mm
28 - 112 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.9
f2.8 - f6.2
Metering
Centre weighted, Multi-segment, Spot
Intelligent Multiple
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
60 sec
Max. shutter speed
1/2000 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
Optical
None
White balance presets
7
6
Screen size
1.5"
Screen resolution
114,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
SDHC, Secure Digital
USB
USB 1.1
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
Li-Ion
Weight
204 g
110 g
Dimensions
104 x 51 x 32 mm
95.9 x 53.9 x 22.0 mm
Year
2003
2010
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix DMC-F1 vs. Leica D-LUX
- Panasonic Lumix DMC-F1 vs. Sony Cyber-shot DSC-RX100 II
- Panasonic Lumix DMC-F1 vs. Panasonic Lumix DMC-FZ7
- Panasonic Lumix DMC-F1 vs. Nokia 808 PureView
- Panasonic Lumix DMC-F1 vs. Samsung ST500
- Panasonic Lumix DMC-F1 vs. Nokia Lumia 1020
- Panasonic Lumix DMC-F1 vs. AgfaPhoto Compact 102
- Panasonic Lumix DMC-F1 vs. Fujifilm FinePix F31fd
- Panasonic Lumix DMC-F1 vs. Canon PowerShot S110
- Panasonic Lumix DMC-F1 vs. Nikon Coolpix P510
- Panasonic Lumix DMC-F1 vs. Panasonic Lumix DMC-LC33
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Panasonic F1 diagonal
The diagonal of F1 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Panasonic F3 diagonal
The diagonal of F3 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
| Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
F1 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
F3 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
F1 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2063 pixels
Sensor resolution width = 2063 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.79 µm |
| 2063 |
F3 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 4011 pixels
Sensor resolution width = 4011 pixels
| Pixel pitch = | 6.08 | × 1000 | = 1.52 µm |
| 4011 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
F1 pixel area
Pixel pitch = 2.79 µm
Pixel area = 2.79² = 7.78 µm²
Pixel area = 2.79² = 7.78 µm²
F3 pixel area
Pixel pitch = 1.52 µm
Pixel area = 1.52² = 2.31 µm²
Pixel area = 1.52² = 2.31 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
F1 pixel density
Sensor resolution width = 2063 pixels
Sensor width = 0.575 cm
Pixel density = (2063 / 0.575)² / 1000000 = 12.87 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2063 / 0.575)² / 1000000 = 12.87 MP/cm²
F3 pixel density
Sensor resolution width = 4011 pixels
Sensor width = 0.608 cm
Pixel density = (4011 / 0.608)² / 1000000 = 43.52 MP/cm²
Sensor width = 0.608 cm
Pixel density = (4011 / 0.608)² / 1000000 = 43.52 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
F1 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 3.20
Resolution horizontal: X × r = 1551 × 1.33 = 2063
Resolution vertical: X = 1551
Sensor resolution = 2063 x 1551
Sensor height = 4.32 mm
Effective megapixels = 3.20
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1551
Sensor resolution = 2063 x 1551
F3 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Sensor height = 4.56 mm
Effective megapixels = 12.10
| r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
F1 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
F3 crop factor
Sensor diagonal in mm = 7.60 mm
| Crop factor = | 43.27 | = 5.69 |
| 7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
F1 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
F3 equivalent aperture
Crop factor = 5.69
Aperture = f2.8 - f6.2
35-mm equivalent aperture = (f2.8 - f6.2) × 5.69 = f15.9 - f35.3
Aperture = f2.8 - f6.2
35-mm equivalent aperture = (f2.8 - f6.2) × 5.69 = f15.9 - f35.3
More comparisons of Panasonic F1:
- Panasonic Lumix DMC-F1 vs. Olympus PEN E-PL1
- Panasonic Lumix DMC-F1 vs. Panasonic Lumix DMC-F3
- Panasonic Lumix DMC-F1 vs. Canon PowerShot A4000 IS
- Panasonic Lumix DMC-F1 vs. Canon EOS 500D
- Panasonic Lumix DMC-F1 vs. Sony Cyber-shot DSC-HX50
- Panasonic Lumix DMC-F1 vs. Canon PowerShot SX280 HS
- Panasonic Lumix DMC-F1 vs. Sony Cyber-shot DSC-RX100
- Panasonic Lumix DMC-F1 vs. Panasonic Lumix DMC-F7
- Panasonic Lumix DMC-F1 vs. Samsung NX300
- Panasonic Lumix DMC-F1 vs. Panasonic Lumix DMC-LX5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.