Panasonic Lumix DMC-F7 vs. Nokia 808 PureView

Comparison

change cameras »
Lumix DMC-F7 image
vs
808 PureView image
Panasonic Lumix DMC-F7 Nokia 808 PureView
check price » check price »
Megapixels
1.90
41.48
Max. image resolution
1600 x 1200
7152 x 5368

Sensor

Sensor type
CCD
CMOS
Sensor size
1/2.7" (~ 5.33 x 4 mm)
10.82 x 7.52 mm
Sensor resolution
1589 x 1195
7728 x 5367
Diagonal
6.66 mm
13.18 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 3.82
(ratio)
Panasonic Lumix DMC-F7 Nokia 808 PureView
Surface area:
21.32 mm² vs 81.37 mm²
Difference: 60.05 mm² (282%)
808 PureView sensor is approx. 3.82x bigger than F7 sensor.
Note: You are comparing sensors of vastly different generations. There is a gap of 11 years between Panasonic F7 (2001) and Nokia 808 PureView (2012). Eleven years is a huge amount of time, technology wise, resulting in newer sensor being much more efficient than the older one.
Pixel pitch
3.35 µm
1.4 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 1.95 µm (139%)
Pixel pitch of F7 is approx. 139% higher than pixel pitch of 808 PureView.
Pixel area
11.22 µm²
1.96 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 9.26 µm² (472%)
A pixel on Panasonic F7 sensor is approx. 472% bigger than a pixel on Nokia 808 PureView.
Pixel density
8.89 MP/cm²
51.01 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 42.12 µm (474%)
Nokia 808 PureView has approx. 474% higher pixel density than Panasonic F7.
To learn about the accuracy of these numbers, click here.



Specs

Panasonic F7
Nokia 808 PureView
Crop factor
6.5
3.28
Total megapixels
2.10
41.48
Effective megapixels
1.90
Optical zoom
2x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400
50 - 1600
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
10 cm
15 cm
Focal length (35mm equiv.)
35 - 70 mm
28 mm
Aperture priority
No
Max. aperture
f2.8 - f4
f2.4
Max. aperture (35mm equiv.)
f18.2 - f26
f7.9
Metering
Matrix, Spot
Exposure compensation
±2 EV (in 1/2 EV steps)
Shutter priority
No
Min. shutter speed
2 sec
Max. shutter speed
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
White balance presets
7
4
Screen size
1.5"
4"
Screen resolution
60,000 dots
640 x 360 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
16 GB on-board memory
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable
Li-Ion 1400 mAh (BV-4D)
Weight
150 g
169 g
Dimensions
104 x 51 x 32 mm
123.9 x 60.2 x 13.9 mm
Year
2001
2012




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Panasonic F7 diagonal

The diagonal of F7 sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of that value - 6.66 mm. If you want to know why, see sensor sizes.

w = 5.33 mm
h = 4.00 mm
Diagonal =  5.33² + 4.00²   = 6.66 mm

Nokia 808 PureView diagonal

w = 10.82 mm
h = 7.52 mm
Diagonal =  10.82² + 7.52²   = 13.18 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

F7 sensor area

Width = 5.33 mm
Height = 4.00 mm

Surface area = 5.33 × 4.00 = 21.32 mm²

808 PureView sensor area

Width = 10.82 mm
Height = 7.52 mm

Surface area = 10.82 × 7.52 = 81.37 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

F7 pixel pitch

Sensor width = 5.33 mm
Sensor resolution width = 1589 pixels
Pixel pitch =   5.33  × 1000  = 3.35 µm
1589

808 PureView pixel pitch

Sensor width = 10.82 mm
Sensor resolution width = 7728 pixels
Pixel pitch =   10.82  × 1000  = 1.4 µm
7728


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

F7 pixel area

Pixel pitch = 3.35 µm

Pixel area = 3.35² = 11.22 µm²

808 PureView pixel area

Pixel pitch = 1.4 µm

Pixel area = 1.4² = 1.96 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

F7 pixel density

Sensor resolution width = 1589 pixels
Sensor width = 0.533 cm

Pixel density = (1589 / 0.533)² / 1000000 = 8.89 MP/cm²

808 PureView pixel density

Sensor resolution width = 7728 pixels
Sensor width = 1.082 cm

Pixel density = (7728 / 1.082)² / 1000000 = 51.01 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

F7 sensor resolution

Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 1.90
r = 5.33/4.00 = 1.33
X =  1.90 × 1000000  = 1195
1.33
Resolution horizontal: X × r = 1195 × 1.33 = 1589
Resolution vertical: X = 1195

Sensor resolution = 1589 x 1195

808 PureView sensor resolution

Sensor width = 10.82 mm
Sensor height = 7.52 mm
Effective megapixels = 41.48
r = 10.82/7.52 = 1.44
X =  41.48 × 1000000  = 5367
1.44
Resolution horizontal: X × r = 5367 × 1.44 = 7728
Resolution vertical: X = 5367

Sensor resolution = 7728 x 5367


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


F7 crop factor

Sensor diagonal in mm = 6.66 mm
Crop factor =   43.27  = 6.5
6.66

808 PureView crop factor

Sensor diagonal in mm = 13.18 mm
Crop factor =   43.27  = 3.28
13.18

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

F7 equivalent aperture

Crop factor = 6.5
Aperture = f2.8 - f4

35-mm equivalent aperture = (f2.8 - f4) × 6.5 = f18.2 - f26

808 PureView equivalent aperture

Crop factor = 3.28
Aperture = f2.4

35-mm equivalent aperture = (f2.4) × 3.28 = f7.9

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.