Panasonic Lumix DMC-FH7 vs. Fujifilm FinePix JX200
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Panasonic Lumix DMC-FH7 | Fujifilm FinePix JX200 | ||||
| check price » | check price » | ||||
Megapixels
16.10
12.20
Max. image resolution
4608 x 3456
4000 x 3000
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.33" (~ 6.08 x 4.56 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.03 |
| (ratio) | ||
| Panasonic Lumix DMC-FH7 | Fujifilm FinePix JX200 | |
Surface area:
| 27.72 mm² | vs | 28.46 mm² |
Difference: 0.74 mm² (3%)
JX200 sensor is slightly bigger than FH7 sensor (only 3% difference).
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.62 µm² (36%)
A pixel on Fujifilm JX200 sensor is approx. 36% bigger than a pixel on Panasonic FH7.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic FH7
Fujifilm JX200
Total megapixels
16.60
Effective megapixels
16.10
Optical zoom
4x
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600 - 6400
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
50 cm
45 cm
Macro focus range
5 cm
10 cm
Focal length (35mm equiv.)
28 - 112 mm
28 - 140 mm
Aperture priority
No
No
Max. aperture
f3.1 - f6.5
f3.6 - f5.9
Metering
Intelligent Multiple
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
60 sec
8 sec
Max. shutter speed
1/1600 sec
1/1400 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
5
Screen size
3"
2.7"
Screen resolution
230,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SDHC, SDXC, Secure Digital
SDHC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable battery
Li-Ion
Weight
126 g
113 g
Dimensions
95.3 x 56.3 x 19.4 mm
93 x 55 x 22.9 mm
Year
2011
2010
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix DMC-FH7 vs. Panasonic Lumix DMC-FH8
- Panasonic Lumix DMC-FH7 vs. Panasonic Lumix DMC-LX3
- Panasonic Lumix DMC-FH7 vs. Fujifilm FinePix JX420
- Panasonic Lumix DMC-FH7 vs. Nikon Coolpix L29
- Panasonic Lumix DMC-FH7 vs. Sony Cyber-shot DSC-T700
- Panasonic Lumix DMC-FH7 vs. Fujifilm FinePix S2950
- Panasonic Lumix DMC-FH7 vs. Panasonic Lumix DMC-TZ30
- Panasonic Lumix DMC-FH7 vs. Sony Cyber-shot DSC-W350
- Panasonic Lumix DMC-FH7 vs. Sony Cyber-shot DSC-RX100 II
- Panasonic Lumix DMC-FH7 vs. Panasonic Lumix DMC-SZ1
- Panasonic Lumix DMC-FH7 vs. Sony Cyber-shot DSC-W810
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Panasonic FH7 diagonal
The diagonal of FH7 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
| Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Fujifilm JX200 diagonal
The diagonal of JX200 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
FH7 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
JX200 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
FH7 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 4627 pixels
Sensor resolution width = 4627 pixels
| Pixel pitch = | 6.08 | × 1000 | = 1.31 µm |
| 4627 |
JX200 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4029 pixels
Sensor resolution width = 4029 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.53 µm |
| 4029 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
FH7 pixel area
Pixel pitch = 1.31 µm
Pixel area = 1.31² = 1.72 µm²
Pixel area = 1.31² = 1.72 µm²
JX200 pixel area
Pixel pitch = 1.53 µm
Pixel area = 1.53² = 2.34 µm²
Pixel area = 1.53² = 2.34 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
FH7 pixel density
Sensor resolution width = 4627 pixels
Sensor width = 0.608 cm
Pixel density = (4627 / 0.608)² / 1000000 = 57.92 MP/cm²
Sensor width = 0.608 cm
Pixel density = (4627 / 0.608)² / 1000000 = 57.92 MP/cm²
JX200 pixel density
Sensor resolution width = 4029 pixels
Sensor width = 0.616 cm
Pixel density = (4029 / 0.616)² / 1000000 = 42.78 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4029 / 0.616)² / 1000000 = 42.78 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
FH7 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 16.10
Resolution horizontal: X × r = 3479 × 1.33 = 4627
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
Sensor height = 4.56 mm
Effective megapixels = 16.10
| r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
JX200 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.20
Resolution horizontal: X × r = 3029 × 1.33 = 4029
Resolution vertical: X = 3029
Sensor resolution = 4029 x 3029
Sensor height = 4.62 mm
Effective megapixels = 12.20
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3029
Sensor resolution = 4029 x 3029
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
FH7 crop factor
Sensor diagonal in mm = 7.60 mm
| Crop factor = | 43.27 | = 5.69 |
| 7.60 |
JX200 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
FH7 equivalent aperture
Crop factor = 5.69
Aperture = f3.1 - f6.5
35-mm equivalent aperture = (f3.1 - f6.5) × 5.69 = f17.6 - f37
Aperture = f3.1 - f6.5
35-mm equivalent aperture = (f3.1 - f6.5) × 5.69 = f17.6 - f37
JX200 equivalent aperture
Crop factor = 5.62
Aperture = f3.6 - f5.9
35-mm equivalent aperture = (f3.6 - f5.9) × 5.62 = f20.2 - f33.2
Aperture = f3.6 - f5.9
35-mm equivalent aperture = (f3.6 - f5.9) × 5.62 = f20.2 - f33.2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.