Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-LS1
Comparison
change cameras » | |||||
|
vs |
|
|||
Panasonic Lumix DMC-LC20 | Panasonic Lumix DMC-LS1 | ||||
check price » | check price » |
Megapixels
1.90
4.00
Max. image resolution
1600 x 1200
2304 x 1728
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.7" (~ 5.33 x 4 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.17 |
(ratio) | ||
Panasonic Lumix DMC-LC20 | Panasonic Lumix DMC-LS1 |
Surface area:
21.32 mm² | vs | 24.84 mm² |
Difference: 3.52 mm² (17%)
LS1 sensor is approx. 1.17x bigger than LC20 sensor.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Panasonic LC20 (2002) and Panasonic LS1 (2005).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 5.02 µm² (81%)
A pixel on Panasonic LC20 sensor is approx. 81% bigger than a pixel on Panasonic LS1.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic LC20
Panasonic LS1
Total megapixels
2.10
4.20
Effective megapixels
1.90
4.00
Optical zoom
3x
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400
Auto, 64, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
15 cm
5 cm
Focal length (35mm equiv.)
35 - 105 mm
35 - 105 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.5
f2.8 - f5
Metering
Centre weighted
Multi-pattern
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1 sec
8 sec
Max. shutter speed
1/1000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
7
5
Screen size
1.5"
2"
Screen resolution
110,000 dots
85,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
Secure Digital
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA (2) batteries (NiMH recommended)
AA (2) batteries (NiMH recommended)
Weight
250 g
142 g
Dimensions
99 x 66 x 40 mm
94 x 63 x 31 mm
Year
2002
2005
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix DMC-LC20 vs. Fujifilm FinePix A120
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-LX5
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-FZ50
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-LS2
- Panasonic Lumix DMC-LC20 vs. Nikon Coolpix SQ
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-LC80
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-LC5
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-LC33
- Panasonic Lumix DMC-LC20 vs. Minolta DiMAGE X
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-LS1
- Panasonic Lumix DMC-LC20 vs. Olympus C-40 Zoom
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Panasonic LC20 diagonal
The diagonal of LC20 sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Panasonic LS1 diagonal
The diagonal of LS1 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
LC20 sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
LS1 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
LC20 pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 1589 pixels
Sensor resolution width = 1589 pixels
Pixel pitch = | 5.33 | × 1000 | = 3.35 µm |
1589 |
LS1 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2306 pixels
Sensor resolution width = 2306 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.49 µm |
2306 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
LC20 pixel area
Pixel pitch = 3.35 µm
Pixel area = 3.35² = 11.22 µm²
Pixel area = 3.35² = 11.22 µm²
LS1 pixel area
Pixel pitch = 2.49 µm
Pixel area = 2.49² = 6.2 µm²
Pixel area = 2.49² = 6.2 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
LC20 pixel density
Sensor resolution width = 1589 pixels
Sensor width = 0.533 cm
Pixel density = (1589 / 0.533)² / 1000000 = 8.89 MP/cm²
Sensor width = 0.533 cm
Pixel density = (1589 / 0.533)² / 1000000 = 8.89 MP/cm²
LS1 pixel density
Sensor resolution width = 2306 pixels
Sensor width = 0.575 cm
Pixel density = (2306 / 0.575)² / 1000000 = 16.08 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2306 / 0.575)² / 1000000 = 16.08 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
LC20 sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 1.90
Resolution horizontal: X × r = 1195 × 1.33 = 1589
Resolution vertical: X = 1195
Sensor resolution = 1589 x 1195
Sensor height = 4.00 mm
Effective megapixels = 1.90
r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 1195
Sensor resolution = 1589 x 1195
LS1 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 4.00
Resolution horizontal: X × r = 1734 × 1.33 = 2306
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
Sensor height = 4.32 mm
Effective megapixels = 4.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
LC20 crop factor
Sensor diagonal in mm = 6.66 mm
Crop factor = | 43.27 | = 6.5 |
6.66 |
LS1 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
LC20 equivalent aperture
Crop factor = 6.5
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 6.5 = f18.2 - f29.3
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 6.5 = f18.2 - f29.3
LS1 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f5
35-mm equivalent aperture = (f2.8 - f5) × 6.02 = f16.9 - f30.1
Aperture = f2.8 - f5
35-mm equivalent aperture = (f2.8 - f5) × 6.02 = f16.9 - f30.1
More comparisons of Panasonic LC20:
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-FP1
- Panasonic Lumix DMC-LC20 vs. Nikon D50
- Panasonic Lumix DMC-LC20 vs. Canon PowerShot S2 IS
- Panasonic Lumix DMC-LC20 vs. HP Photosmart M537
- Panasonic Lumix DMC-LC20 vs. Sony Cyber-shot DSC-P73
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-FX5
- Panasonic Lumix DMC-LC20 vs. Panasonic Lumix DMC-TZ100
- Panasonic Lumix DMC-LC20 vs. Canon PowerShot S110
- Panasonic Lumix DMC-LC20 vs. Sony Cyber-shot DSC-W830
- Panasonic Lumix DMC-LC20 vs. Canon PowerShot G5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.