Panasonic Lumix S9 vs. Panasonic Lumix DC-G100
Comparison
change cameras » | |||||
|
vs |
|
|||
Panasonic Lumix S9 | Panasonic Lumix DC-G100 | ||||
check price » | check price » |
Megapixels
24.20
20.30
Max. image resolution
6000 x 4000
5184 x 3888
Sensor
Sensor type
CMOS
CMOS
Sensor size
35.6 x 23.8 mm
Four Thirds (17.3 x 13 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
3.77 | : | 1 |
(ratio) | ||
Panasonic Lumix S9 | Panasonic Lumix DC-G100 |
Surface area:
847.28 mm² | vs | 224.90 mm² |
Difference: 622.38 mm² (277%)
Lumix S9 sensor is approx. 3.77x bigger than Lumix DC-G100 sensor.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Panasonic Lumix S9 (2024) and Panasonic Lumix DC-G100 (2020).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 23.84 µm² (215%)
A pixel on Panasonic Lumix S9 sensor is approx. 215% bigger than a pixel on Panasonic Lumix DC-G100.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic Lumix S9
Panasonic Lumix DC-G100
Total megapixels
25.30
21.77
Effective megapixels
24.20
20.30
Optical zoom
Digital zoom
Yes
ISO sensitivity
Auto, 100-51200 (extends to 50-204800)
Auto, 200-25600 (extends down to 100)
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Multi, Center-weighted, Highlight-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±5 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
60 sec
60 sec
Max. shutter speed
1/8000 sec
1/16000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
7
5
Screen size
3"
3"
Screen resolution
1,840,000 dots
1,840,000 dots
Video capture
Max. video resolution
5952x3968 (30p/25p/24p)
3840x2160 (30p/24p)
Storage types
SD/SDHC/SDXC (UHS-II)
SD/SDHC/SDXC
USB
USB 3.2 (10 GBit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
DMW-BLK22 Lithium-Ion battery
BLG10 lithium-ion battery
Weight
486 g
352 g
Dimensions
126 x 73.9 x 46.7 mm
115.6 x 82.5 x 54.2 mm
Year
2024
2020
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix S9 vs. Sony a7C II
- Panasonic Lumix S9 vs. Nikon Zf
- Panasonic Lumix S9 vs. Nikon Z5
- Panasonic Lumix S9 vs. Panasonic Lumix DC-G9 II
- Panasonic Lumix S9 vs. Sigma fp L
- Panasonic Lumix S9 vs. Panasonic Lumix DC-G100
- Panasonic Lumix S9 vs. Fujifilm X-T4
- Panasonic Lumix S9 vs. Panasonic Lumix DMC-LX100
- Panasonic Lumix S9 vs. Sony Alpha a6500
- Panasonic Lumix S9 vs. Sony Cyber-shot DSC-RX100 V
- Panasonic Lumix S9 vs. Nikon Z6 III
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Panasonic Lumix S9 diagonal
w = 35.60 mm
h = 23.80 mm
h = 23.80 mm
Diagonal = √ | 35.60² + 23.80² | = 42.82 mm |
Panasonic Lumix DC-G100 diagonal
w = 17.30 mm
h = 13.00 mm
h = 13.00 mm
Diagonal = √ | 17.30² + 13.00² | = 21.64 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Lumix S9 sensor area
Width = 35.60 mm
Height = 23.80 mm
Surface area = 35.60 × 23.80 = 847.28 mm²
Height = 23.80 mm
Surface area = 35.60 × 23.80 = 847.28 mm²
Lumix DC-G100 sensor area
Width = 17.30 mm
Height = 13.00 mm
Surface area = 17.30 × 13.00 = 224.90 mm²
Height = 13.00 mm
Surface area = 17.30 × 13.00 = 224.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Lumix S9 pixel pitch
Sensor width = 35.60 mm
Sensor resolution width = 6026 pixels
Sensor resolution width = 6026 pixels
Pixel pitch = | 35.60 | × 1000 | = 5.91 µm |
6026 |
Lumix DC-G100 pixel pitch
Sensor width = 17.30 mm
Sensor resolution width = 5196 pixels
Sensor resolution width = 5196 pixels
Pixel pitch = | 17.30 | × 1000 | = 3.33 µm |
5196 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Lumix S9 pixel area
Pixel pitch = 5.91 µm
Pixel area = 5.91² = 34.93 µm²
Pixel area = 5.91² = 34.93 µm²
Lumix DC-G100 pixel area
Pixel pitch = 3.33 µm
Pixel area = 3.33² = 11.09 µm²
Pixel area = 3.33² = 11.09 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Lumix S9 pixel density
Sensor resolution width = 6026 pixels
Sensor width = 3.56 cm
Pixel density = (6026 / 3.56)² / 1000000 = 2.87 MP/cm²
Sensor width = 3.56 cm
Pixel density = (6026 / 3.56)² / 1000000 = 2.87 MP/cm²
Lumix DC-G100 pixel density
Sensor resolution width = 5196 pixels
Sensor width = 1.73 cm
Pixel density = (5196 / 1.73)² / 1000000 = 9.02 MP/cm²
Sensor width = 1.73 cm
Pixel density = (5196 / 1.73)² / 1000000 = 9.02 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Lumix S9 sensor resolution
Sensor width = 35.60 mm
Sensor height = 23.80 mm
Effective megapixels = 24.20
Resolution horizontal: X × r = 4017 × 1.5 = 6026
Resolution vertical: X = 4017
Sensor resolution = 6026 x 4017
Sensor height = 23.80 mm
Effective megapixels = 24.20
r = 35.60/23.80 = 1.5 |
|
Resolution vertical: X = 4017
Sensor resolution = 6026 x 4017
Lumix DC-G100 sensor resolution
Sensor width = 17.30 mm
Sensor height = 13.00 mm
Effective megapixels = 20.30
Resolution horizontal: X × r = 3907 × 1.33 = 5196
Resolution vertical: X = 3907
Sensor resolution = 5196 x 3907
Sensor height = 13.00 mm
Effective megapixels = 20.30
r = 17.30/13.00 = 1.33 |
|
Resolution vertical: X = 3907
Sensor resolution = 5196 x 3907
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Lumix S9 crop factor
Sensor diagonal in mm = 42.82 mm
Crop factor = | 43.27 | = 1.01 |
42.82 |
Lumix DC-G100 crop factor
Sensor diagonal in mm = 21.64 mm
Crop factor = | 43.27 | = 2 |
21.64 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Lumix S9 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Panasonic Lumix S9, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Panasonic Lumix S9 is 1.01
Crop factor for Panasonic Lumix S9 is 1.01
Lumix DC-G100 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Panasonic Lumix DC-G100, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Panasonic Lumix DC-G100 is 2
Crop factor for Panasonic Lumix DC-G100 is 2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.