Samsung NX1000 vs. Samsung NX210

Comparison

change cameras »

Samsung NX1000

Samsung NX210

check price »

Megapixels

20.30

Max. image resolution

5472 x 3648

Sensor

Sensor type

CMOS

Sensor size

23.5 x 15.7 mm

Sensor resolution

5519 x 3679

Diagonal

28.26 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	1
(ratio)

Samsung NX1000		Samsung NX210

Surface area:

368.95 mm²

Difference: 0 mm² (0%)

NX1000 and NX210 sensors are the same size.

Pixel pitch

4.26 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0 µm (0%)

NX1000 and NX210 have the same pixel pitch.

Pixel area

18.15 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 0 µm² (0%)

Samsung NX1000 and Samsung NX210 have the same pixel area.

Pixel density

5.52 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 0 µm (0%)

Samsung NX1000 and Samsung NX210 have the same pixel density.

To learn about the accuracy of these numbers, click here.

Specs

Samsung NX1000

Samsung NX210

Crop factor

1.53

Total megapixels

21.60

Effective megapixels

20.30

Optical zoom

Digital zoom

Yes

ISO sensitivity

Auto, 100, 200, 400, 800, 1600, 3200, 6400, 12800

RAW

Manual focus

Normal focus range

Macro focus range

Focal length (35mm equiv.)

Aperture priority

Yes

Max. aperture

Max. aperture (35mm equiv.)

n/a

Metering

Multi, Center-weighted, Spot

Exposure compensation

±3 EV (in 1/3 EV, 1/2 EV steps)

Shutter priority

Yes

Min. shutter speed

30 sec

Max. shutter speed

1/4000 sec

Built-in flash

External flash

Viewfinder

None

White balance presets

Screen size

Screen resolution

921,000 dots

614,000 dots

Video capture

Max. video resolution

1920x1080 (30p)

Storage types

SD/SDHC/SDXC

USB

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

Lithium-Ion BC1030 battery

Weight

222 g

Dimensions

114 x 63 x 37 mm

117 x 63 x 37 mm

Year

2012

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Samsung NX1000 diagonal

w = 23.50 mm
h = 15.70 mm

Diagonal = √

23.50² + 15.70²

= 28.26 mm

Samsung NX210 diagonal

w = 23.50 mm
h = 15.70 mm

Diagonal = √

23.50² + 15.70²

= 28.26 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

NX1000 sensor area

Width = 23.50 mm
Height = 15.70 mm

Surface area = 23.50 × 15.70 = 368.95 mm²

NX210 sensor area

Width = 23.50 mm
Height = 15.70 mm

Surface area = 23.50 × 15.70 = 368.95 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

NX1000 pixel pitch

Sensor width = 23.50 mm
Sensor resolution width = 5519 pixels

Pixel pitch =	23.50	× 1000	= 4.26 µm
	5519

NX210 pixel pitch

Sensor width = 23.50 mm
Sensor resolution width = 5519 pixels

Pixel pitch =	23.50	× 1000	= 4.26 µm
	5519

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

NX1000 pixel area

Pixel pitch = 4.26 µm

Pixel area = 4.26² = 18.15 µm²

NX210 pixel area

Pixel pitch = 4.26 µm

Pixel area = 4.26² = 18.15 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

NX1000 pixel density

Sensor resolution width = 5519 pixels
Sensor width = 2.35 cm

Pixel density = (5519 / 2.35)² / 1000000 = 5.52 MP/cm²

NX210 pixel density

Sensor resolution width = 5519 pixels
Sensor width = 2.35 cm

Pixel density = (5519 / 2.35)² / 1000000 = 5.52 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

NX1000 sensor resolution

Sensor width = 23.50 mm
Sensor height = 15.70 mm
Effective megapixels = 20.30

r = 23.50/15.70 = 1.5

X = √	20.30 × 1000000	= 3679
	1.5

Resolution horizontal: X × r = 3679 × 1.5 = 5519
Resolution vertical: X = 3679

Sensor resolution = 5519 x 3679

NX210 sensor resolution

Sensor width = 23.50 mm
Sensor height = 15.70 mm
Effective megapixels = 20.30

r = 23.50/15.70 = 1.5

X = √	20.30 × 1000000	= 3679
	1.5

Resolution horizontal: X × r = 3679 × 1.5 = 5519
Resolution vertical: X = 3679

Sensor resolution = 5519 x 3679

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

NX1000 crop factor

Sensor diagonal in mm = 28.26 mm

Crop factor =	43.27	= 1.53
	28.26

NX210 crop factor

Sensor diagonal in mm = 28.26 mm

Crop factor =	43.27	= 1.53
	28.26

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

NX1000 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Samsung NX1000, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Samsung NX1000 is 1.53

NX210 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Samsung NX210, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Samsung NX210 is 1.53

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.