Sony Cyber-shot DSC-T50 vs. Sony Cyber-shot DSC-T100

Comparison

change cameras »

Sony Cyber-shot DSC-T50

Sony Cyber-shot DSC-T100

check price »

Megapixels

7.20

Max. image resolution

3072 x 2304

3264 x 2448

Sensor

Sensor type

CCD

Sensor size

1/2.5" (~ 5.75 x 4.32 mm)

Sensor resolution

3095 x 2327

Diagonal

7.19 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	1
(ratio)

Sony Cyber-shot DSC-T50		Sony Cyber-shot DSC-T100

Surface area:

24.84 mm²

Difference: 0 mm² (0%)

T50 and T100 sensors are the same size.

Pixel pitch

1.86 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0 µm (0%)

T50 and T100 have the same pixel pitch.

Pixel area

3.46 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 0 µm² (0%)

Sony T50 and Sony T100 have the same pixel area.

Pixel density

28.97 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 0 µm (0%)

Sony T50 and Sony T100 have the same pixel density.

To learn about the accuracy of these numbers, click here.

Specs

Sony T50

Sony T100

Crop factor

6.02

Total megapixels

Effective megapixels

Optical zoom

Digital zoom

Yes

ISO sensitivity

Auto, 64, 100, 200, 400, 800, 1000

Auto, 80, 100, 200, 400, 800, 1600, 3200

RAW

Manual focus

Normal focus range

50 cm

Macro focus range

6 cm

1 cm

Focal length (35mm equiv.)

38 - 114 mm

35 - 175 mm

Aperture priority

Max. aperture

f3.5 - f4.3

f3.5 - f4.4

Max. aperture (35mm equiv.)

f21.1 - f25.9

f21.1 - f26.5

Metering

Centre weighted, Multi-pattern, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Min. shutter speed

8 sec

1 sec

Max. shutter speed

1/2000 sec

1/1000 sec

Built-in flash

External flash

Viewfinder

None

White balance presets

Screen size

Screen resolution

230,000 dots

Video capture

Max. video resolution

Storage types

Memory Stick Duo, Memory Stick Pro Duo

USB

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

InfoLithium (NP-FR1)

InfoLithium (NP-BG1)

Weight

170 g

172 g

Dimensions

95.0 x 56.5 x 23.4 mm

91.8 x 59.2 x 22.3 mm

Year

2006

2007

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Sony T50 diagonal

The diagonal of T50 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 7.19 mm. If you want to know why, see sensor sizes.

w = 5.75 mm
h = 4.32 mm

Diagonal = √

5.75² + 4.32²

= 7.19 mm

Sony T100 diagonal

The diagonal of T100 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 7.19 mm. If you want to know why, see sensor sizes.

w = 5.75 mm
h = 4.32 mm

Diagonal = √

5.75² + 4.32²

= 7.19 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

T50 sensor area

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²

T100 sensor area

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

T50 pixel pitch

Sensor width = 5.75 mm
Sensor resolution width = 3095 pixels

Pixel pitch =	5.75	× 1000	= 1.86 µm
	3095

T100 pixel pitch

Sensor width = 5.75 mm
Sensor resolution width = 3095 pixels

Pixel pitch =	5.75	× 1000	= 1.86 µm
	3095

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

T50 pixel area

Pixel pitch = 1.86 µm

Pixel area = 1.86² = 3.46 µm²

T100 pixel area

Pixel pitch = 1.86 µm

Pixel area = 1.86² = 3.46 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

T50 pixel density

Sensor resolution width = 3095 pixels
Sensor width = 0.575 cm

Pixel density = (3095 / 0.575)² / 1000000 = 28.97 MP/cm²

T100 pixel density

Sensor resolution width = 3095 pixels
Sensor width = 0.575 cm

Pixel density = (3095 / 0.575)² / 1000000 = 28.97 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

T50 sensor resolution

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.20

r = 5.75/4.32 = 1.33

X = √	7.20 × 1000000	= 2327
	1.33

Resolution horizontal: X × r = 2327 × 1.33 = 3095
Resolution vertical: X = 2327

Sensor resolution = 3095 x 2327

T100 sensor resolution

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.20

r = 5.75/4.32 = 1.33

X = √	7.20 × 1000000	= 2327
	1.33

Resolution horizontal: X × r = 2327 × 1.33 = 3095
Resolution vertical: X = 2327

Sensor resolution = 3095 x 2327

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

T50 crop factor

Sensor diagonal in mm = 7.19 mm

Crop factor =	43.27	= 6.02
	7.19

T100 crop factor

Sensor diagonal in mm = 7.19 mm

Crop factor =	43.27	= 6.02
	7.19

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

T50 equivalent aperture

Crop factor = 6.02
Aperture = f3.5 - f4.3

35-mm equivalent aperture = (f3.5 - f4.3) × 6.02 = f21.1 - f25.9

T100 equivalent aperture

Crop factor = 6.02
Aperture = f3.5 - f4.4

35-mm equivalent aperture = (f3.5 - f4.4) × 6.02 = f21.1 - f26.5

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.