Sony FX30 vs. Canon EOS 6D
Comparison
change cameras » | |||||
|
vs |
|
|||
Sony FX30 | Canon EOS 6D | ||||
check price » | check price » |
Megapixels
26.00
20.20
Max. image resolution
6192 x 4128
5472 x 3648
Sensor
Sensor type
CMOS
CMOS
Sensor size
23.3 x 15.5 mm
35.8 x 23.9 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 2.37 |
(ratio) | ||
Sony FX30 | Canon EOS 6D |
Surface area:
361.15 mm² | vs | 855.62 mm² |
Difference: 494.47 mm² (137%)
6D sensor is approx. 2.37x bigger than FX30 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Sony FX30 (2022) and Canon 6D (2012).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 28.34 µm² (204%)
A pixel on Canon 6D sensor is approx. 204% bigger than a pixel on Sony FX30.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Sony FX30
Canon 6D
Total megapixels
27.00
20.60
Effective megapixels
26.00
20.20
Optical zoom
Digital zoom
ISO sensitivity
Auto, 100-32000 (extends to 50-102400)
Auto, 100 - 25600 in 1/3 stops, plus 50, 51200, 102400 as option
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Multi, Center-weighted, Highlight-weighted, Average, Spot, Partial
Multi, Center-weighted, Spot
Exposure compensation
±5 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/8000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
Optical (pentaprism)
White balance presets
7
6
Screen size
3"
3"
Screen resolution
2,360,000 dots
1,040,000 dots
Video capture
Max. video resolution
3840x2160 (120p)
1920x1080 (30p/25p/24p)
Storage types
SD/CFexpress Type A
SD/SDHC/SDXC
USB
USB 3.0 (5 GBit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Rechargeable Battery NP-FZ100
Lithium-Ion LP-E6 rechargeable battery
Weight
646 g
770 g
Dimensions
129.7 x 77.8 x 84.5 mm
144.5 x 110.5 x 71.2 mm
Year
2022
2012
Choose cameras to compare
Popular comparisons:
- Sony FX30 vs. Sony A7 IV
- Sony FX30 vs. Fujifilm X-H2S
- Sony FX30 vs. Sony Alpha A7 III
- Sony FX30 vs. Sony a7S III
- Sony FX30 vs. Sony a7R V
- Sony FX30 vs. Sony ZV-E10
- Sony FX30 vs. Sony a6600
- Sony FX30 vs. Canon EOS R5
- Sony FX30 vs. Sony a7C
- Sony FX30 vs. Canon EOS R7
- Sony FX30 vs. Canon EOS R6 Mark II
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Sony FX30 diagonal
w = 23.30 mm
h = 15.50 mm
h = 15.50 mm
Diagonal = √ | 23.30² + 15.50² | = 27.98 mm |
Canon 6D diagonal
w = 35.80 mm
h = 23.90 mm
h = 23.90 mm
Diagonal = √ | 35.80² + 23.90² | = 43.04 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
FX30 sensor area
Width = 23.30 mm
Height = 15.50 mm
Surface area = 23.30 × 15.50 = 361.15 mm²
Height = 15.50 mm
Surface area = 23.30 × 15.50 = 361.15 mm²
6D sensor area
Width = 35.80 mm
Height = 23.90 mm
Surface area = 35.80 × 23.90 = 855.62 mm²
Height = 23.90 mm
Surface area = 35.80 × 23.90 = 855.62 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
FX30 pixel pitch
Sensor width = 23.30 mm
Sensor resolution width = 6245 pixels
Sensor resolution width = 6245 pixels
Pixel pitch = | 23.30 | × 1000 | = 3.73 µm |
6245 |
6D pixel pitch
Sensor width = 35.80 mm
Sensor resolution width = 5505 pixels
Sensor resolution width = 5505 pixels
Pixel pitch = | 35.80 | × 1000 | = 6.5 µm |
5505 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
FX30 pixel area
Pixel pitch = 3.73 µm
Pixel area = 3.73² = 13.91 µm²
Pixel area = 3.73² = 13.91 µm²
6D pixel area
Pixel pitch = 6.5 µm
Pixel area = 6.5² = 42.25 µm²
Pixel area = 6.5² = 42.25 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
FX30 pixel density
Sensor resolution width = 6245 pixels
Sensor width = 2.33 cm
Pixel density = (6245 / 2.33)² / 1000000 = 7.18 MP/cm²
Sensor width = 2.33 cm
Pixel density = (6245 / 2.33)² / 1000000 = 7.18 MP/cm²
6D pixel density
Sensor resolution width = 5505 pixels
Sensor width = 3.58 cm
Pixel density = (5505 / 3.58)² / 1000000 = 2.36 MP/cm²
Sensor width = 3.58 cm
Pixel density = (5505 / 3.58)² / 1000000 = 2.36 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
FX30 sensor resolution
Sensor width = 23.30 mm
Sensor height = 15.50 mm
Effective megapixels = 26.00
Resolution horizontal: X × r = 4163 × 1.5 = 6245
Resolution vertical: X = 4163
Sensor resolution = 6245 x 4163
Sensor height = 15.50 mm
Effective megapixels = 26.00
r = 23.30/15.50 = 1.5 |
|
Resolution vertical: X = 4163
Sensor resolution = 6245 x 4163
6D sensor resolution
Sensor width = 35.80 mm
Sensor height = 23.90 mm
Effective megapixels = 20.20
Resolution horizontal: X × r = 3670 × 1.5 = 5505
Resolution vertical: X = 3670
Sensor resolution = 5505 x 3670
Sensor height = 23.90 mm
Effective megapixels = 20.20
r = 35.80/23.90 = 1.5 |
|
Resolution vertical: X = 3670
Sensor resolution = 5505 x 3670
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
FX30 crop factor
Sensor diagonal in mm = 27.98 mm
Crop factor = | 43.27 | = 1.55 |
27.98 |
6D crop factor
Sensor diagonal in mm = 43.04 mm
Crop factor = | 43.27 | = 1.01 |
43.04 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
FX30 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sony FX30, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Sony FX30 is 1.55
Crop factor for Sony FX30 is 1.55
6D equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 6D, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 6D is 1.01
Crop factor for Canon 6D is 1.01
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.