Sony ZV-E10 II vs. Canon IXY DIGITAL 3000 IS
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Sony ZV-E10 II | Canon IXY DIGITAL 3000 IS | ||||
| check price » | check price » | ||||
Megapixels
26.00
14.70
Max. image resolution
6192 x 4128
4416 x 3312
Sensor
Sensor type
CMOS
CCD
Sensor size
23.3 x 15.5 mm
1/1.7" (~ 7.53 x 5.64 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 8.5 | : | 1 |
| (ratio) | ||
| Sony ZV-E10 II | Canon IXY DIGITAL 3000 IS | |
Surface area:
| 361.15 mm² | vs | 42.47 mm² |
Difference: 318.68 mm² (750%)
ZV-E10 II sensor is approx. 8.5x bigger than IXY DIGITAL 3000 IS sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 16 years between Sony ZV-E10 II (2024) and
Canon IXY DIGITAL 3000 IS (2008).
Sixteen years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 11.02 µm² (381%)
A pixel on Sony ZV-E10 II sensor is approx. 381% bigger than a pixel on Canon IXY DIGITAL 3000 IS.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Sony ZV-E10 II
Canon IXY DIGITAL 3000 IS
Total megapixels
27.00
Effective megapixels
26.00
14.70
Optical zoom
3.7x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100-32000 (extends to 50-102400)
Auto, 80 ,100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
36 - 133 mm
Aperture priority
Yes
No
Max. aperture
f2.8 - f5.8
Metering
Multi, Center-weighted, Highlight-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±5 EV (in 1/3 EV, 1/2 EV, 1 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
30 sec
15 sec
Max. shutter speed
1/8000 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
None
Optical (tunnel)
White balance presets
10
5
Screen size
3"
2.5"
Screen resolution
1,036,800 dots
230,000 dots
Video capture
Max. video resolution
3840x2160 (60p/50p/30p/25p/24p)
Storage types
SD (UHS-I/II compliant)
SD/SDHC/MMC card
USB
USB 3.2 (10 GBit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
NP-FZ100 Lithium-Ion battery
Lithium-Ion NB-5L battery
Weight
292 g
205 g
Dimensions
114.8 x 67.5 x 54.2 mm
98 x 62 x 28 mm
Year
2024
2008
Choose cameras to compare
Popular comparisons:
- Sony ZV-E10 II vs. Sony ZV-E10
- Sony ZV-E10 II vs. Sony a7R V
- Sony ZV-E10 II vs. Sony a6700
- Sony ZV-E10 II vs. Sony ZV-1
- Sony ZV-E10 II vs. Sony a7CR
- Sony ZV-E10 II vs. Sony a6600
- Sony ZV-E10 II vs. Canon IXY DIGITAL 3000 IS
- Sony ZV-E10 II vs. Sony Alpha a6500
- Sony ZV-E10 II vs. Sony Cyber-shot DSC-RX10 IV
- Sony ZV-E10 II vs. Panasonic Lumix DC-ZS200
- Sony ZV-E10 II vs. Nikon Z6 III
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Sony ZV-E10 II diagonal
w = 23.30 mm
h = 15.50 mm
h = 15.50 mm
| Diagonal = √ | 23.30² + 15.50² | = 27.98 mm |
Canon IXY DIGITAL 3000 IS diagonal
The diagonal of IXY DIGITAL 3000 IS sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
| Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
ZV-E10 II sensor area
Width = 23.30 mm
Height = 15.50 mm
Surface area = 23.30 × 15.50 = 361.15 mm²
Height = 15.50 mm
Surface area = 23.30 × 15.50 = 361.15 mm²
IXY DIGITAL 3000 IS sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
ZV-E10 II pixel pitch
Sensor width = 23.30 mm
Sensor resolution width = 6245 pixels
Sensor resolution width = 6245 pixels
| Pixel pitch = | 23.30 | × 1000 | = 3.73 µm |
| 6245 |
IXY DIGITAL 3000 IS pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 4438 pixels
Sensor resolution width = 4438 pixels
| Pixel pitch = | 7.53 | × 1000 | = 1.7 µm |
| 4438 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
ZV-E10 II pixel area
Pixel pitch = 3.73 µm
Pixel area = 3.73² = 13.91 µm²
Pixel area = 3.73² = 13.91 µm²
IXY DIGITAL 3000 IS pixel area
Pixel pitch = 1.7 µm
Pixel area = 1.7² = 2.89 µm²
Pixel area = 1.7² = 2.89 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
ZV-E10 II pixel density
Sensor resolution width = 6245 pixels
Sensor width = 2.33 cm
Pixel density = (6245 / 2.33)² / 1000000 = 7.18 MP/cm²
Sensor width = 2.33 cm
Pixel density = (6245 / 2.33)² / 1000000 = 7.18 MP/cm²
IXY DIGITAL 3000 IS pixel density
Sensor resolution width = 4438 pixels
Sensor width = 0.753 cm
Pixel density = (4438 / 0.753)² / 1000000 = 34.74 MP/cm²
Sensor width = 0.753 cm
Pixel density = (4438 / 0.753)² / 1000000 = 34.74 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
ZV-E10 II sensor resolution
Sensor width = 23.30 mm
Sensor height = 15.50 mm
Effective megapixels = 26.00
Resolution horizontal: X × r = 4163 × 1.5 = 6245
Resolution vertical: X = 4163
Sensor resolution = 6245 x 4163
Sensor height = 15.50 mm
Effective megapixels = 26.00
| r = 23.30/15.50 = 1.5 |
|
Resolution vertical: X = 4163
Sensor resolution = 6245 x 4163
IXY DIGITAL 3000 IS sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 14.70
Resolution horizontal: X × r = 3312 × 1.34 = 4438
Resolution vertical: X = 3312
Sensor resolution = 4438 x 3312
Sensor height = 5.64 mm
Effective megapixels = 14.70
| r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 3312
Sensor resolution = 4438 x 3312
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
ZV-E10 II crop factor
Sensor diagonal in mm = 27.98 mm
| Crop factor = | 43.27 | = 1.55 |
| 27.98 |
IXY DIGITAL 3000 IS crop factor
Sensor diagonal in mm = 9.41 mm
| Crop factor = | 43.27 | = 4.6 |
| 9.41 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
ZV-E10 II equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sony ZV-E10 II, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Sony ZV-E10 II is 1.55
Crop factor for Sony ZV-E10 II is 1.55
IXY DIGITAL 3000 IS equivalent aperture
Crop factor = 4.6
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 4.6 = f12.9 - f26.7
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 4.6 = f12.9 - f26.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.