Sony ZV-E10 II vs. Sony a7CR
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Sony ZV-E10 II | Sony a7CR | ||||
| check price » | check price » | ||||
Megapixels
26.00
61.00
Max. image resolution
6192 x 4128
9504 x 6336
Sensor
Sensor type
CMOS
CMOS
Sensor size
23.3 x 15.5 mm
35.7 x 23.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 2.35 |
| (ratio) | ||
| Sony ZV-E10 II | Sony a7CR | |
Surface area:
| 361.15 mm² | vs | 849.66 mm² |
Difference: 488.51 mm² (135%)
a7CR sensor is approx. 2.35x bigger than ZV-E10 II sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0 µm² (0%)
Sony ZV-E10 II and Sony a7CR have the same pixel area.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Sony ZV-E10 II
Sony a7CR
Total megapixels
27.00
62.50
Effective megapixels
26.00
61.00
Optical zoom
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100-32000 (extends to 50-102400)
Auto, 100-32000 (extends to 50-102400)
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Multi, Center-weighted, Highlight-weighted, Spot
Multi, Center-weighted, Highlight-weighted, Average, Spot
Exposure compensation
±5 EV (in 1/3 EV, 1/2 EV, 1 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/8000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
10
9
Screen size
3"
3"
Screen resolution
1,036,800 dots
1,036,800 dots
Video capture
Max. video resolution
3840x2160 (60p/50p/30p/25p/24p)
3840x2160 (60/50/30/25/24)
Storage types
SD (UHS-I/II compliant)
SD/SDHC/SDXC (UHS-II)
USB
USB 3.2 (10 GBit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
NP-FZ100 Lithium-Ion battery
NP-FZ100 lithium-ion battery
Weight
292 g
515 g
Dimensions
114.8 x 67.5 x 54.2 mm
124 x 71.1 x 63.4 mm
Year
2024
2023
Choose cameras to compare
Popular comparisons:
- Sony ZV-E10 II vs. Sony ZV-E10
- Sony ZV-E10 II vs. Sony a7R V
- Sony ZV-E10 II vs. Sony a6700
- Sony ZV-E10 II vs. Sony ZV-1
- Sony ZV-E10 II vs. Sony a7CR
- Sony ZV-E10 II vs. Sony a6600
- Sony ZV-E10 II vs. Canon IXY DIGITAL 3000 IS
- Sony ZV-E10 II vs. Sony Alpha a6500
- Sony ZV-E10 II vs. Sony Cyber-shot DSC-RX10 IV
- Sony ZV-E10 II vs. Panasonic Lumix DC-ZS200
- Sony ZV-E10 II vs. Nikon Z6 III
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Sony ZV-E10 II diagonal
w = 23.30 mm
h = 15.50 mm
h = 15.50 mm
| Diagonal = √ | 23.30² + 15.50² | = 27.98 mm |
Sony a7CR diagonal
w = 35.70 mm
h = 23.80 mm
h = 23.80 mm
| Diagonal = √ | 35.70² + 23.80² | = 42.91 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
ZV-E10 II sensor area
Width = 23.30 mm
Height = 15.50 mm
Surface area = 23.30 × 15.50 = 361.15 mm²
Height = 15.50 mm
Surface area = 23.30 × 15.50 = 361.15 mm²
a7CR sensor area
Width = 35.70 mm
Height = 23.80 mm
Surface area = 35.70 × 23.80 = 849.66 mm²
Height = 23.80 mm
Surface area = 35.70 × 23.80 = 849.66 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
ZV-E10 II pixel pitch
Sensor width = 23.30 mm
Sensor resolution width = 6245 pixels
Sensor resolution width = 6245 pixels
| Pixel pitch = | 23.30 | × 1000 | = 3.73 µm |
| 6245 |
a7CR pixel pitch
Sensor width = 35.70 mm
Sensor resolution width = 9566 pixels
Sensor resolution width = 9566 pixels
| Pixel pitch = | 35.70 | × 1000 | = 3.73 µm |
| 9566 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
ZV-E10 II pixel area
Pixel pitch = 3.73 µm
Pixel area = 3.73² = 13.91 µm²
Pixel area = 3.73² = 13.91 µm²
a7CR pixel area
Pixel pitch = 3.73 µm
Pixel area = 3.73² = 13.91 µm²
Pixel area = 3.73² = 13.91 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
ZV-E10 II pixel density
Sensor resolution width = 6245 pixels
Sensor width = 2.33 cm
Pixel density = (6245 / 2.33)² / 1000000 = 7.18 MP/cm²
Sensor width = 2.33 cm
Pixel density = (6245 / 2.33)² / 1000000 = 7.18 MP/cm²
a7CR pixel density
Sensor resolution width = 9566 pixels
Sensor width = 3.57 cm
Pixel density = (9566 / 3.57)² / 1000000 = 7.18 MP/cm²
Sensor width = 3.57 cm
Pixel density = (9566 / 3.57)² / 1000000 = 7.18 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
ZV-E10 II sensor resolution
Sensor width = 23.30 mm
Sensor height = 15.50 mm
Effective megapixels = 26.00
Resolution horizontal: X × r = 4163 × 1.5 = 6245
Resolution vertical: X = 4163
Sensor resolution = 6245 x 4163
Sensor height = 15.50 mm
Effective megapixels = 26.00
| r = 23.30/15.50 = 1.5 |
|
Resolution vertical: X = 4163
Sensor resolution = 6245 x 4163
a7CR sensor resolution
Sensor width = 35.70 mm
Sensor height = 23.80 mm
Effective megapixels = 61.00
Resolution horizontal: X × r = 6377 × 1.5 = 9566
Resolution vertical: X = 6377
Sensor resolution = 9566 x 6377
Sensor height = 23.80 mm
Effective megapixels = 61.00
| r = 35.70/23.80 = 1.5 |
|
Resolution vertical: X = 6377
Sensor resolution = 9566 x 6377
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
ZV-E10 II crop factor
Sensor diagonal in mm = 27.98 mm
| Crop factor = | 43.27 | = 1.55 |
| 27.98 |
a7CR crop factor
Sensor diagonal in mm = 42.91 mm
| Crop factor = | 43.27 | = 1.01 |
| 42.91 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
ZV-E10 II equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sony ZV-E10 II, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Sony ZV-E10 II is 1.55
Crop factor for Sony ZV-E10 II is 1.55
a7CR equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sony a7CR, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Sony a7CR is 1.01
Crop factor for Sony a7CR is 1.01
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.