Olympus SP 500 UZ


Brand: Olympus
Model: SP 500 UZ
Megapixels: 6.37
Sensor: 1/2.5" (~ 5.75 x 4.32 mm)
Price: check here »

Sensor info

Olympus SP 500 UZ comes with a 1/2.5" (~ 5.75 x 4.32 mm) CCD sensor, which has a diagonal of 7.19 mm (0.28") and a surface area of 24.84 mm².
7.19 mm
Surface area
24.8 mm²
Pixel pitch
1.98 µm
Pixel area
3.92 µm²
Pixel density
25.61 MP/cm²
If you want to know about the accuracy of these numbers, click here.

Actual sensor size

Note: Actual size is set to screen → change »
This is the actual size of the SP 500 UZ sensor: ~5.75 x 4.32 mm
The sensor has a surface area of 24.8 mm². There are approx. 6,370,000 photosites (pixels) on this area. Pixel pitch, which is a measure of the distance between pixels, is 1.98 µm. Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next.

Pixel or photosite area is 3.92 µm². The larger the photosite, the more light it can capture and the more information can be recorded.

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor. Olympus SP 500 UZ has a pixel density of 25.61 MP/cm².

These numbers are important in terms of assessing the overall quality of a digital camera. Generally, the bigger (and newer) the sensor, pixel pitch and photosite area, and the smaller the pixel density, the better the camera. If you want to see how SP 500 UZ compares to other cameras, click here.


Brand: Olympus
Model: SP 500 UZ
Megapixels: 6.37
Sensor size: 1/2.5" (~ 5.75 x 4.32 mm)
Sensor type: CCD
Sensor resolution: 2910 x 2188
Max. image resolution: 2816 x 2112
Crop factor: 6.02
Optical zoom: Yes
Digital zoom: Yes
ISO: Auto, 80, 100, 200, 400
RAW support:
Manual focus:
Normal focus range: 60 cm
Macro focus range: 3 cm
Focal length (35mm equiv.): 38 - 380 mm
Aperture priority: Yes
Max aperture: f2.8 - f3.7
Max. aperture (35mm equiv.): f16.9 - f22.3
Depth of field: simulate →
Metering: Centre weighted, ESP Digital, Spot
Exposure Compensation: ±2 EV (in 1/3 EV steps)
Shutter priority: Yes
Min. shutter speed: 15 sec
Max. shutter speed: 1/1000 sec
Built-in flash:
External flash:
Viewfinder: Electronic
White balance presets: 6
Screen size: 2.5"
Screen resolution: 115,000 dots
Video capture:
Storage types: xD Picture card
Battery: 2x CR-V3, 4x AA
Weight: 285 g
Dimensions: 105.5 x 74.5 x 71.0 mm
Year: 2005

Compare SP 500 UZ with another camera



The diagonal of SP 500 UZ sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 0.28" (7.19 mm). If you want to know why, see sensor sizes.

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Olympus SP 500 UZ diagonal:

w = 5.75 mm
h = 4.32 mm
Diagonal =  5.75² + 4.32²   = 7.19 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

Olympus SP 500 UZ pixel pitch:

Sensor width = 5.75 mm
Sensor resolution width = 2910 pixels
Pixel pitch =   5.75  × 1000  = 1.98 µm

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

Olympus SP 500 UZ pixel area:

Pixel pitch = 1.98 µm

Pixel area = 1.98² = 3.92 µm²

Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

You could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

Olympus SP 500 UZ pixel density:

Sensor resolution width = 2910 pixels
Sensor width = 0.575 cm

Pixel density = (2910 / 0.575)² / 1000000 = 25.61 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

Olympus SP 500 UZ sensor resolution:

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.37
r = 5.75/4.32 = 1.33
X =  6.37 × 1000000  = 2188
Resolution horizontal: X × r = 2188 × 1.33 = 2910
Resolution vertical: X = 2188

Sensor resolution = 2910 x 2188

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm

Olympus SP 500 UZ crop factor:

Sensor diagonal = 7.19 mm
Crop factor =   43.27  = 6.02

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

Olympus SP 500 UZ equivalent aperture:

Crop factor = 6.02
Aperture = f2.8 - f3.7

35-mm equivalent aperture = (f2.8 - f3.7) × 6.02 = f16.9 - f22.3

Enter your screen size (diagonal)

My screen size is  inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.