Leica C-LUX 1 vs. Sigma SD15
Comparison
change cameras » | |||||
|
vs |
|
|||
Leica C-LUX 1 | Sigma SD15 | ||||
check price » | check price » |
Megapixels
6.00
4.70
Max. image resolution
2816 x 2112
2640 x 1760 x 3
Note: Sigma SD15 uses Foveon X3 image sensor, which is a new type of sensor that
has 3 layers of photoelements stacked together in 1 pixel location. Traditional
CCD/CMOS sensors have 1 pixel for 1 color, whereas Foveon sensor captures all
3 colors (blue, green, and red) at every pixel.
Sensor
Sensor type
CCD
Foveon
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
20.7 x 13.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 11.5 |
(ratio) | ||
Leica C-LUX 1 | Sigma SD15 |
Surface area:
24.84 mm² | vs | 285.66 mm² |
Difference: 260.82 mm² (1050%)
SD15 sensor is approx. 11.5x bigger than C-LUX 1 sensor.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Leica C-LUX 1 (2006) and Sigma SD15 (2010).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 56.68 µm² (1363%)
A pixel on Sigma SD15 sensor is approx. 1363% bigger than a pixel on Leica C-LUX 1.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Leica C-LUX 1
Sigma SD15
Total megapixels
6.30
4.70
Effective megapixels
6.00
4.70
Optical zoom
3.6x
Digital zoom
Yes
No
ISO sensitivity
Auto, 80, 100, 200, 400, 800, 1600
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
3 cm
Focal length (35mm equiv.)
28 - 102 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f4.6
Metering
Multi-segment
Center-weighted average, Centre weighted, Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
60 sec
B+30 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
Optical (pentaprism)
White balance presets
6
8
Screen size
2.5"
3"
Screen resolution
207,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
SDHC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable battery
Lithium-Ion rechargeable battery
Weight
132 g
750 g
Dimensions
94.1 x 51.1 x 24.2 mm
144 x 107.3 x 80.5 mm
Year
2006
2010
Choose cameras to compare
Popular comparisons:
- Leica C-LUX 1 vs. Leica C-LUX 2
- Leica C-LUX 1 vs. Nokia 808 PureView
- Leica C-LUX 1 vs. Panasonic Lumix DMC-FX3
- Leica C-LUX 1 vs. Panasonic Lumix DMC-LX7
- Leica C-LUX 1 vs. Leica C-LUX 3
- Leica C-LUX 1 vs. Leica C (Typ112)
- Leica C-LUX 1 vs. Minox DCC 5.1
- Leica C-LUX 1 vs. Sony Cyber-shot DSC-RX100 II
- Leica C-LUX 1 vs. Panasonic Lumix DMC-FX1
- Leica C-LUX 1 vs. Sony Cyber-shot DSC-RX100 III
- Leica C-LUX 1 vs. Panasonic Lumix DMC-LX100
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Leica C-LUX 1 diagonal
The diagonal of C-LUX 1 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Sigma SD15 diagonal
w = 20.70 mm
h = 13.80 mm
h = 13.80 mm
Diagonal = √ | 20.70² + 13.80² | = 24.88 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
C-LUX 1 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
SD15 sensor area
Width = 20.70 mm
Height = 13.80 mm
Surface area = 20.70 × 13.80 = 285.66 mm²
Height = 13.80 mm
Surface area = 20.70 × 13.80 = 285.66 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
C-LUX 1 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2825 pixels
Sensor resolution width = 2825 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.04 µm |
2825 |
SD15 pixel pitch
Sensor width = 20.70 mm
Sensor resolution width = 2655 pixels
Sensor resolution width = 2655 pixels
Pixel pitch = | 20.70 | × 1000 | = 7.8 µm |
2655 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
C-LUX 1 pixel area
Pixel pitch = 2.04 µm
Pixel area = 2.04² = 4.16 µm²
Pixel area = 2.04² = 4.16 µm²
SD15 pixel area
Pixel pitch = 7.8 µm
Pixel area = 7.8² = 60.84 µm²
Pixel area = 7.8² = 60.84 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
C-LUX 1 pixel density
Sensor resolution width = 2825 pixels
Sensor width = 0.575 cm
Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²
SD15 pixel density
Sensor resolution width = 2655 pixels
Sensor width = 2.07 cm
Pixel density = (2655 / 2.07)² / 1000000 = 1.65 MP/cm²
Sensor width = 2.07 cm
Pixel density = (2655 / 2.07)² / 1000000 = 1.65 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
C-LUX 1 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.00
Resolution horizontal: X × r = 2124 × 1.33 = 2825
Resolution vertical: X = 2124
Sensor resolution = 2825 x 2124
Sensor height = 4.32 mm
Effective megapixels = 6.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2124
Sensor resolution = 2825 x 2124
SD15 sensor resolution
Sensor width = 20.70 mm
Sensor height = 13.80 mm
Effective megapixels = 4.70
Resolution horizontal: X × r = 1770 × 1.5 = 2655
Resolution vertical: X = 1770
Sensor resolution = 2655 x 1770
Sensor height = 13.80 mm
Effective megapixels = 4.70
r = 20.70/13.80 = 1.5 |
|
Resolution vertical: X = 1770
Sensor resolution = 2655 x 1770
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
C-LUX 1 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
SD15 crop factor
Sensor diagonal in mm = 24.88 mm
Crop factor = | 43.27 | = 1.74 |
24.88 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
C-LUX 1 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.6
35-mm equivalent aperture = (f2.8 - f4.6) × 6.02 = f16.9 - f27.7
Aperture = f2.8 - f4.6
35-mm equivalent aperture = (f2.8 - f4.6) × 6.02 = f16.9 - f27.7
SD15 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sigma SD15, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Sigma SD15 is 1.74
Crop factor for Sigma SD15 is 1.74
More comparisons of Leica C-LUX 1:
- Leica C-LUX 1 vs. Leica Digilux 2
- Leica C-LUX 1 vs. Panasonic Lumix DMC-LF1
- Leica C-LUX 1 vs. Leica D-Lux 6
- Leica C-LUX 1 vs. Leica D-LUX 4
- Leica C-LUX 1 vs. Sony Alpha 7
- Leica C-LUX 1 vs. Sony Cyber-shot DSC-RX100
- Leica C-LUX 1 vs. Fujifilm X20
- Leica C-LUX 1 vs. Sony Cyber-shot DSC-WX7
- Leica C-LUX 1 vs. Canon EOS 5D Mark III
- Leica C-LUX 1 vs. Nikon 1 J5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.