Acer CL-5300 vs. Acer CP-8531
Comparison
change cameras » | |||||
|
vs |
|
|||
Acer CL-5300 | Acer CP-8531 | ||||
check price » | check price » |
Megapixels
5.00
8.05
Max. image resolution
2592 x 1944
3264 x 2448
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.53 |
(ratio) | ||
Acer CL-5300 | Acer CP-8531 |
Surface area:
24.84 mm² | vs | 37.90 mm² |
Difference: 13.06 mm² (53%)
CP-8531 sensor is approx. 1.53x bigger than CL-5300 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.26 µm² (6%)
A pixel on Acer CL-5300 sensor is approx. 6% bigger than a pixel on Acer CP-8531.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Acer CL-5300
Acer CP-8531
Total megapixels
Effective megapixels
Optical zoom
No
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200
Auto, 50, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
38 mm
36 - 108 mm
Aperture priority
No
No
Max. aperture
f2.8
f2.8 - f4.8
Metering
Centre weighted
Multi-segment, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
2 sec
1/2 sec
Max. shutter speed
1/2000 sec
1/1500 sec
Built-in flash
External flash
Viewfinder
Optical
Optical
White balance presets
5
6
Screen size
2"
2.5"
Screen resolution
153,000 dots
201,096 dots
Video capture
Max. video resolution
Storage types
Secure Digital
Secure Digital
USB
USB 1.1
USB 1.1
HDMI
Wireless
GPS
Battery
2x AA
Li-Ion
Weight
85 g
150 g
Dimensions
90 x 55 x 24 mm
91 x 57 x 27 mm
Year
2006
2006
Choose cameras to compare
Popular comparisons:
- Acer CL-5300 vs. Acer CI-6530
- Acer CL-5300 vs. BenQ AE100
- Acer CL-5300 vs. Acer CE-6430
- Acer CL-5300 vs. Nikon Coolpix P310
- Acer CL-5300 vs. Acer CP-8531
- Acer CL-5300 vs. AgfaPhoto Compact 103
- Acer CL-5300 vs. Canon EOS 700D
- Acer CL-5300 vs. Kodak PixPro AZ651
- Acer CL-5300 vs. Nikon D5300
- Acer CL-5300 vs. Panasonic Lumix DMC-FS42
- Acer CL-5300 vs. Nikon Coolpix A1000
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Acer CL-5300 diagonal
The diagonal of CL-5300 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Acer CP-8531 diagonal
The diagonal of CP-8531 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
CL-5300 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
CP-8531 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
CL-5300 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
2579 |
CP-8531 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 3272 pixels
Sensor resolution width = 3272 pixels
Pixel pitch = | 7.11 | × 1000 | = 2.17 µm |
3272 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
CL-5300 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
CP-8531 pixel area
Pixel pitch = 2.17 µm
Pixel area = 2.17² = 4.71 µm²
Pixel area = 2.17² = 4.71 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
CL-5300 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
CP-8531 pixel density
Sensor resolution width = 3272 pixels
Sensor width = 0.711 cm
Pixel density = (3272 / 0.711)² / 1000000 = 21.18 MP/cm²
Sensor width = 0.711 cm
Pixel density = (3272 / 0.711)² / 1000000 = 21.18 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
CL-5300 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
CP-8531 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 8.05
Resolution horizontal: X × r = 2460 × 1.33 = 3272
Resolution vertical: X = 2460
Sensor resolution = 3272 x 2460
Sensor height = 5.33 mm
Effective megapixels = 8.05
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2460
Sensor resolution = 3272 x 2460
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
CL-5300 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
CP-8531 crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
CL-5300 equivalent aperture
Crop factor = 6.02
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 6.02 = f16.9
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 6.02 = f16.9
CP-8531 equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 4.87 = f13.6 - f23.4
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 4.87 = f13.6 - f23.4
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.