AgfaPhoto DC-1338i vs. Casio Exilim EX-TR15
Comparison
change cameras » | |||||
|
vs |
|
|||
AgfaPhoto DC-1338i | Casio Exilim EX-TR15 | ||||
check price » | check price » |
Megapixels
10.00
12.10
Max. image resolution
3584 x 2688
4000 x 3000
Sensor
Sensor type
CCD
CMOS
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.33 | : | 1 |
(ratio) | ||
AgfaPhoto DC-1338i | Casio Exilim EX-TR15 |
Surface area:
37.90 mm² | vs | 28.46 mm² |
Difference: 9.44 mm² (33%)
DC-1338i sensor is approx. 1.33x bigger than TR15 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 6 years between AgfaPhoto DC-1338i (2007) and Casio TR15 (2013).
Six years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.43 µm² (60%)
A pixel on AgfaPhoto DC-1338i sensor is approx. 60% bigger than a pixel on Casio TR15.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
AgfaPhoto DC-1338i
Casio TR15
Total megapixels
12.76
Effective megapixels
12.10
Optical zoom
Yes
1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400, 800, 1600
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
10 cm
50 cm
Macro focus range
8 cm
Focal length (35mm equiv.)
35 - 105 mm
21 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.1
f2.8
Metering
Centre weighted, Multi Spot
Multi
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
1 sec
Max. shutter speed
1/2000 sec
1/16000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
6
Screen size
3"
3"
Screen resolution
921,600 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
Rechargeable lithium ion battery NP-150
Weight
140 g
170 g
Dimensions
97.5 x 25 x 62.5 mm
128.9 x 61.6 x 14.9 mm
Year
2007
2013
Choose cameras to compare
Popular comparisons:
- AgfaPhoto DC-1338i vs. AgfaPhoto DC-1338sT
- AgfaPhoto DC-1338i vs. AgfaPhoto Compact 102
- AgfaPhoto DC-1338i vs. Epson PhotoPC 3100 Zoom
- AgfaPhoto DC-1338i vs. Casio Exilim EX-TR15
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
- Canon EOS 1300D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
AgfaPhoto DC-1338i diagonal
The diagonal of DC-1338i sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Casio TR15 diagonal
The diagonal of TR15 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DC-1338i sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
TR15 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DC-1338i pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
Pixel pitch = | 7.11 | × 1000 | = 1.95 µm |
3647 |
TR15 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4011 pixels
Sensor resolution width = 4011 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.54 µm |
4011 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DC-1338i pixel area
Pixel pitch = 1.95 µm
Pixel area = 1.95² = 3.8 µm²
Pixel area = 1.95² = 3.8 µm²
TR15 pixel area
Pixel pitch = 1.54 µm
Pixel area = 1.54² = 2.37 µm²
Pixel area = 1.54² = 2.37 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DC-1338i pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.711 cm
Pixel density = (3647 / 0.711)² / 1000000 = 26.31 MP/cm²
Sensor width = 0.711 cm
Pixel density = (3647 / 0.711)² / 1000000 = 26.31 MP/cm²
TR15 pixel density
Sensor resolution width = 4011 pixels
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DC-1338i sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 5.33 mm
Effective megapixels = 10.00
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
TR15 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Sensor height = 4.62 mm
Effective megapixels = 12.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DC-1338i crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
TR15 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DC-1338i equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f5.1
35-mm equivalent aperture = (f2.8 - f5.1) × 4.87 = f13.6 - f24.8
Aperture = f2.8 - f5.1
35-mm equivalent aperture = (f2.8 - f5.1) × 4.87 = f13.6 - f24.8
TR15 equivalent aperture
Crop factor = 5.62
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.62 = f15.7
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.62 = f15.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.