AgfaPhoto Optima 100 vs. Concord 3045
Comparison
| change cameras » | |||||
|
vs |
|
|||
| AgfaPhoto Optima 100 | Concord 3045 | ||||
| check price » | check price » | ||||
Megapixels
10.00
3.10
Max. image resolution
3648 x 2736
2560 x 1920
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.33" (~ 6.08 x 4.56 mm)
1/2" (~ 6.4 x 4.8 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.11 |
| (ratio) | ||
| AgfaPhoto Optima 100 | Concord 3045 | |
Surface area:
| 27.72 mm² | vs | 30.72 mm² |
Difference: 3 mm² (11%)
3045 sensor is approx. 1.11x bigger than Optima 100 sensor.
Note: You are comparing cameras of different generations.
There is a 4 year gap between AgfaPhoto Optima 100 (2009) and Concord 3045 (2005).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 7.13 µm² (256%)
A pixel on Concord 3045 sensor is approx. 256% bigger than a pixel on AgfaPhoto Optima 100.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
AgfaPhoto Optima 100
Concord 3045
Total megapixels
Effective megapixels
Optical zoom
Yes
No
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600, 3200, 6400
100
RAW
Manual focus
Normal focus range
80 cm
100 cm
Macro focus range
5 cm
20 cm
Focal length (35mm equiv.)
35 - 105 mm
45 mm
Aperture priority
No
No
Max. aperture
f3 - f5.6
f2.8
Metering
Centre weighted, Multi-segment, Spot
Centre weighted
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1 sec
1/2 sec
Max. shutter speed
1/2000 sec
1/4980 sec
Built-in flash
External flash
Viewfinder
None
Optical
White balance presets
6
5
Screen size
2.7"
1.5"
Screen resolution
230,400 dots
61,600 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 1.1
HDMI
Wireless
GPS
Battery
Li-Ion
4x AAA
Weight
105 g
100 g
Dimensions
90 x 56.8 x 18.8 mm
97 x 28 x 63 mm
Year
2009
2005
Choose cameras to compare
Popular comparisons:
- AgfaPhoto Optima 100 vs. Fujifilm FinePix HS30 EXR
- AgfaPhoto Optima 100 vs. AgfaPhoto Optima 102
- AgfaPhoto Optima 100 vs. AgfaPhoto Compact 102
- AgfaPhoto Optima 100 vs. Leica V-LUX 30
- AgfaPhoto Optima 100 vs. Canon PowerShot S100
- AgfaPhoto Optima 100 vs. BenQ DC E1465
- AgfaPhoto Optima 100 vs. Fujifilm FinePix F300EXR
- AgfaPhoto Optima 100 vs. Pentax Optio S5z
- AgfaPhoto Optima 100 vs. Concord 3045
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
AgfaPhoto Optima 100 diagonal
The diagonal of Optima 100 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
| Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Concord 3045 diagonal
The diagonal of 3045 sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Optima 100 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
3045 sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
Optima 100 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
| Pixel pitch = | 6.08 | × 1000 | = 1.67 µm |
| 3647 |
3045 pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 2031 pixels
Sensor resolution width = 2031 pixels
| Pixel pitch = | 6.40 | × 1000 | = 3.15 µm |
| 2031 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
Optima 100 pixel area
Pixel pitch = 1.67 µm
Pixel area = 1.67² = 2.79 µm²
Pixel area = 1.67² = 2.79 µm²
3045 pixel area
Pixel pitch = 3.15 µm
Pixel area = 3.15² = 9.92 µm²
Pixel area = 3.15² = 9.92 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
Optima 100 pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.608 cm
Pixel density = (3647 / 0.608)² / 1000000 = 35.98 MP/cm²
Sensor width = 0.608 cm
Pixel density = (3647 / 0.608)² / 1000000 = 35.98 MP/cm²
3045 pixel density
Sensor resolution width = 2031 pixels
Sensor width = 0.64 cm
Pixel density = (2031 / 0.64)² / 1000000 = 10.07 MP/cm²
Sensor width = 0.64 cm
Pixel density = (2031 / 0.64)² / 1000000 = 10.07 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Optima 100 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 4.56 mm
Effective megapixels = 10.00
| r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
3045 sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 3.10
Resolution horizontal: X × r = 1527 × 1.33 = 2031
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
Sensor height = 4.80 mm
Effective megapixels = 3.10
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
Optima 100 crop factor
Sensor diagonal in mm = 7.60 mm
| Crop factor = | 43.27 | = 5.69 |
| 7.60 |
3045 crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Optima 100 equivalent aperture
Crop factor = 5.69
Aperture = f3 - f5.6
35-mm equivalent aperture = (f3 - f5.6) × 5.69 = f17.1 - f31.9
Aperture = f3 - f5.6
35-mm equivalent aperture = (f3 - f5.6) × 5.69 = f17.1 - f31.9
3045 equivalent aperture
Crop factor = 5.41
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.41 = f15.1
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.41 = f15.1
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.