BenQ DC C1420 vs. Fujifilm FinePix F30 Zoom
Comparison
| change cameras » | |||||
|
vs |
|
|||
| BenQ DC C1420 | Fujifilm FinePix F30 Zoom | ||||
| check price » | check price » | ||||
Megapixels
14.00
6.10
Max. image resolution
4320 x 3240
2848 x 2136
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.33" (~ 6.08 x 4.56 mm)
1/1.7" (~ 7.53 x 5.64 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.53 |
| (ratio) | ||
| BenQ DC C1420 | Fujifilm FinePix F30 Zoom | |
Surface area:
| 27.72 mm² | vs | 42.47 mm² |
Difference: 14.75 mm² (53%)
F30 Zoom sensor is approx. 1.53x bigger than DC C1420 sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between BenQ DC C1420 (2011) and Fujifilm F30 Zoom (2006).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 4.93 µm² (248%)
A pixel on Fujifilm F30 Zoom sensor is approx. 248% bigger than a pixel on BenQ DC C1420.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
BenQ DC C1420
Fujifilm F30 Zoom
Total megapixels
6.30
Effective megapixels
6.10
Optical zoom
Yes
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
40 cm
60 cm
Macro focus range
10 cm
5 cm
Focal length (35mm equiv.)
35 - 105 mm
36 - 108 mm
Aperture priority
No
Yes
Max. aperture
f3.0 - f5.6
f2.8 - f5.0
Metering
Centre weighted, Multi-segment, Spot
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
2 sec
15 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Electronic
None
White balance presets
6
6
Screen size
2.7"
2.5"
Screen resolution
230,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
xD Picture Card, Internal
USB
USB 2.0 (480 Mbit/sec)
USB 1.0
HDMI
Wireless
GPS
Battery
2x AA
Lithium-Ion (NP-95)
Weight
114 g
185 g
Dimensions
96 x 60.7 x 27.7 mm
93 x 57 x 28 mm
Year
2011
2006
Choose cameras to compare
Popular comparisons:
- BenQ DC C1420 vs. BenQ DC 2300
- BenQ DC C1420 vs. BenQ DC 3400
- BenQ DC C1420 vs. Fujifilm FinePix F30 Zoom
- BenQ DC C1420 vs. BenQ DC C1450
- BenQ DC C1420 vs. Panasonic Lumix DMC-FS28
- BenQ DC C1420 vs. BenQ GH700
- BenQ DC C1420 vs. Samsung ST66
- BenQ DC C1420 vs. Canon Digital IXUS 200 IS
- BenQ DC C1420 vs. Casio Exilim EX-N50
- BenQ DC C1420 vs. Samsung NX1100
- BenQ DC C1420 vs. AgfaPhoto DC-1030i
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
BenQ DC C1420 diagonal
The diagonal of DC C1420 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
| Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Fujifilm F30 Zoom diagonal
The diagonal of F30 Zoom sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
| Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DC C1420 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
F30 Zoom sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DC C1420 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 4315 pixels
Sensor resolution width = 4315 pixels
| Pixel pitch = | 6.08 | × 1000 | = 1.41 µm |
| 4315 |
F30 Zoom pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 2860 pixels
Sensor resolution width = 2860 pixels
| Pixel pitch = | 7.53 | × 1000 | = 2.63 µm |
| 2860 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DC C1420 pixel area
Pixel pitch = 1.41 µm
Pixel area = 1.41² = 1.99 µm²
Pixel area = 1.41² = 1.99 µm²
F30 Zoom pixel area
Pixel pitch = 2.63 µm
Pixel area = 2.63² = 6.92 µm²
Pixel area = 2.63² = 6.92 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DC C1420 pixel density
Sensor resolution width = 4315 pixels
Sensor width = 0.608 cm
Pixel density = (4315 / 0.608)² / 1000000 = 50.37 MP/cm²
Sensor width = 0.608 cm
Pixel density = (4315 / 0.608)² / 1000000 = 50.37 MP/cm²
F30 Zoom pixel density
Sensor resolution width = 2860 pixels
Sensor width = 0.753 cm
Pixel density = (2860 / 0.753)² / 1000000 = 14.43 MP/cm²
Sensor width = 0.753 cm
Pixel density = (2860 / 0.753)² / 1000000 = 14.43 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DC C1420 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 14.00
Resolution horizontal: X × r = 3244 × 1.33 = 4315
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Sensor height = 4.56 mm
Effective megapixels = 14.00
| r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
F30 Zoom sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 6.10
Resolution horizontal: X × r = 2134 × 1.34 = 2860
Resolution vertical: X = 2134
Sensor resolution = 2860 x 2134
Sensor height = 5.64 mm
Effective megapixels = 6.10
| r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 2134
Sensor resolution = 2860 x 2134
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DC C1420 crop factor
Sensor diagonal in mm = 7.60 mm
| Crop factor = | 43.27 | = 5.69 |
| 7.60 |
F30 Zoom crop factor
Sensor diagonal in mm = 9.41 mm
| Crop factor = | 43.27 | = 4.6 |
| 9.41 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DC C1420 equivalent aperture
Crop factor = 5.69
Aperture = f3.0 - f5.6
35-mm equivalent aperture = (f3.0 - f5.6) × 5.69 = f17.1 - f31.9
Aperture = f3.0 - f5.6
35-mm equivalent aperture = (f3.0 - f5.6) × 5.69 = f17.1 - f31.9
F30 Zoom equivalent aperture
Crop factor = 4.6
Aperture = f2.8 - f5.0
35-mm equivalent aperture = (f2.8 - f5.0) × 4.6 = f12.9 - f23
Aperture = f2.8 - f5.0
35-mm equivalent aperture = (f2.8 - f5.0) × 4.6 = f12.9 - f23
More comparisons of BenQ DC C1420:
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.