BenQ DC 3400 vs. Praktica Luxmedia 14-Z80S
Comparison
| change cameras » | |||||
|
vs |
|
|||
| BenQ DC 3400 | Praktica Luxmedia 14-Z80S | ||||
| check price » | check price » | ||||
Megapixels
2.00
14.00
Max. image resolution
2048 x 1536
4320 x 3240
Sensor
Sensor type
CMOS
CCD
Sensor size
1/3.2" (~ 4.5 x 3.37 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.88 |
| (ratio) | ||
| BenQ DC 3400 | Praktica Luxmedia 14-Z80S | |
Surface area:
| 15.17 mm² | vs | 28.46 mm² |
Difference: 13.29 mm² (88%)
Luxmedia 14-Z80S sensor is approx. 1.88x bigger than DC 3400 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 7 years between BenQ DC 3400 (2004) and Praktica Luxmedia 14-Z80S (2011).
Seven years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 5.52 µm² (271%)
A pixel on BenQ DC 3400 sensor is approx. 271% bigger than a pixel on Praktica Luxmedia 14-Z80S.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
BenQ DC 3400
Praktica Luxmedia 14-Z80S
Total megapixels
Effective megapixels
14.00
Optical zoom
No
8x
Digital zoom
Yes
Yes
ISO sensitivity
Auto
Auto, 100, 200, 400, 800, 1600, 3200, 6400
RAW
Manual focus
Normal focus range
120 cm
Macro focus range
30 cm
Focal length (35mm equiv.)
24 - 192 mm
Aperture priority
No
No
Max. aperture
f3
Metering
Centre weighted, Spot
Multi, center, spot
Exposure compensation
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/20 sec
15 sec
Max. shutter speed
1/1000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical
None
White balance presets
5
5
Screen size
1.5"
3"
Screen resolution
230,400 dots
Video capture
Max. video resolution
Storage types
Secure Digital
SD/SDHC/SDXC, Internal
USB
USB 1.1
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
Rechargeable Li-ion battery
Weight
135 g
130 g
Dimensions
98 x 58 x 27 mm
98 x 57 x 20 mm
Year
2004
2011
Choose cameras to compare
Popular comparisons:
- BenQ DC 3400 vs. Sony Cyber-shot DSC-RX100
- BenQ DC 3400 vs. Canon Digital IXUS 110 IS
- BenQ DC 3400 vs. Canon PowerShot S110
- BenQ DC 3400 vs. Nikon Coolpix S3400
- BenQ DC 3400 vs. BenQ DC C1020
- BenQ DC 3400 vs. Praktica Luxmedia 14-Z80S
- BenQ DC 3400 vs. Canon EOS 200D
- BenQ DC 3400 vs. AgfaPhoto Optima 102
- BenQ DC 3400 vs. Olympus AZ-2 Zoom
- BenQ DC 3400 vs. Casio Exilim EX-N20
- BenQ DC 3400 vs. Epson PhotoPC 750 Zoom
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
BenQ DC 3400 diagonal
The diagonal of DC 3400 sensor is not 1/3.2 or 0.31" (7.9 mm) as you might expect, but approximately two thirds of
that value - 5.62 mm. If you want to know why, see
sensor sizes.
w = 4.50 mm
h = 3.37 mm
w = 4.50 mm
h = 3.37 mm
| Diagonal = √ | 4.50² + 3.37² | = 5.62 mm |
Praktica Luxmedia 14-Z80S diagonal
The diagonal of Luxmedia 14-Z80S sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DC 3400 sensor area
Width = 4.50 mm
Height = 3.37 mm
Surface area = 4.50 × 3.37 = 15.17 mm²
Height = 3.37 mm
Surface area = 4.50 × 3.37 = 15.17 mm²
Luxmedia 14-Z80S sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DC 3400 pixel pitch
Sensor width = 4.50 mm
Sensor resolution width = 1637 pixels
Sensor resolution width = 1637 pixels
| Pixel pitch = | 4.50 | × 1000 | = 2.75 µm |
| 1637 |
Luxmedia 14-Z80S pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4315 pixels
Sensor resolution width = 4315 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.43 µm |
| 4315 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DC 3400 pixel area
Pixel pitch = 2.75 µm
Pixel area = 2.75² = 7.56 µm²
Pixel area = 2.75² = 7.56 µm²
Luxmedia 14-Z80S pixel area
Pixel pitch = 1.43 µm
Pixel area = 1.43² = 2.04 µm²
Pixel area = 1.43² = 2.04 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DC 3400 pixel density
Sensor resolution width = 1637 pixels
Sensor width = 0.45 cm
Pixel density = (1637 / 0.45)² / 1000000 = 13.23 MP/cm²
Sensor width = 0.45 cm
Pixel density = (1637 / 0.45)² / 1000000 = 13.23 MP/cm²
Luxmedia 14-Z80S pixel density
Sensor resolution width = 4315 pixels
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DC 3400 sensor resolution
Sensor width = 4.50 mm
Sensor height = 3.37 mm
Effective megapixels = 2.00
Resolution horizontal: X × r = 1222 × 1.34 = 1637
Resolution vertical: X = 1222
Sensor resolution = 1637 x 1222
Sensor height = 3.37 mm
Effective megapixels = 2.00
| r = 4.50/3.37 = 1.34 |
|
Resolution vertical: X = 1222
Sensor resolution = 1637 x 1222
Luxmedia 14-Z80S sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.00
Resolution horizontal: X × r = 3244 × 1.33 = 4315
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Sensor height = 4.62 mm
Effective megapixels = 14.00
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DC 3400 crop factor
Sensor diagonal in mm = 5.62 mm
| Crop factor = | 43.27 | = 7.7 |
| 5.62 |
Luxmedia 14-Z80S crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DC 3400 equivalent aperture
Crop factor = 7.7
Aperture = f3
35-mm equivalent aperture = (f3) × 7.7 = f23.1
Aperture = f3
35-mm equivalent aperture = (f3) × 7.7 = f23.1
Luxmedia 14-Z80S equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Praktica Luxmedia 14-Z80S, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Praktica Luxmedia 14-Z80S is 5.62
Crop factor for Praktica Luxmedia 14-Z80S is 5.62
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.