BenQ DC C750 vs. Sony Cyber-shot DSC-W110
Comparison
| change cameras » | |||||
|
vs |
|
|||
| BenQ DC C750 | Sony Cyber-shot DSC-W110 | ||||
| check price » | check price » | ||||
Megapixels
7.00
7.20
Max. image resolution
3072 x 2304
3072 x 2304
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| BenQ DC C750 | Sony Cyber-shot DSC-W110 | |
Surface area:
| 24.84 mm² | vs | 24.84 mm² |
Difference: 0 mm² (0%)
DC C750 and W110 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.07 µm² (2%)
A pixel on BenQ DC C750 sensor is approx. 2% bigger than a pixel on Sony W110.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
BenQ DC C750
Sony W110
Total megapixels
Effective megapixels
Optical zoom
Yes
4x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400, 800, 1600
Auto
RAW
Manual focus
Normal focus range
80 cm
50 cm
Macro focus range
15 cm
4 cm
Focal length (35mm equiv.)
34 - 102 mm
32 - 128 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.2
f2.8 - f5.8
Metering
Centre weighted
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
1/8 sec
Max. shutter speed
1/1600 sec
Built-in flash
External flash
Viewfinder
None
Optical (tunnel)
White balance presets
6
Screen size
2.5"
2.5"
Screen resolution
150,000 dots
115,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
Memory Stick Duo, Memory Stick Pro Duo
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
2x AA
Lithium-Ion (NP-BG1)
Weight
140 g
156 g
Dimensions
93.2 x 62.2 x 25.1 mm
88 x 57 x 22 mm
Year
2008
2008
Choose cameras to compare
Popular comparisons:
- BenQ DC C750 vs. Nikon Coolpix L25
- BenQ DC C750 vs. BenQ DC C800
- BenQ DC C750 vs. BenQ DC C640
- BenQ DC C750 vs. BenQ DC C740i
- BenQ DC C750 vs. Fujifilm FinePix J27
- BenQ DC C750 vs. BenQ DC C1020
- BenQ DC C750 vs. Sony Cyber-shot DSC-W110
- BenQ DC C750 vs. Canon IXUS 175
- BenQ DC C750 vs. Samsung WB500
- BenQ DC C750 vs. Canon PowerShot A800
- BenQ DC C750 vs. BenQ DC C1050
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
BenQ DC C750 diagonal
The diagonal of DC C750 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Sony W110 diagonal
The diagonal of W110 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DC C750 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
W110 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DC C750 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3051 pixels
Sensor resolution width = 3051 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.88 µm |
| 3051 |
W110 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3095 pixels
Sensor resolution width = 3095 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.86 µm |
| 3095 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DC C750 pixel area
Pixel pitch = 1.88 µm
Pixel area = 1.88² = 3.53 µm²
Pixel area = 1.88² = 3.53 µm²
W110 pixel area
Pixel pitch = 1.86 µm
Pixel area = 1.86² = 3.46 µm²
Pixel area = 1.86² = 3.46 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DC C750 pixel density
Sensor resolution width = 3051 pixels
Sensor width = 0.575 cm
Pixel density = (3051 / 0.575)² / 1000000 = 28.15 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3051 / 0.575)² / 1000000 = 28.15 MP/cm²
W110 pixel density
Sensor resolution width = 3095 pixels
Sensor width = 0.575 cm
Pixel density = (3095 / 0.575)² / 1000000 = 28.97 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3095 / 0.575)² / 1000000 = 28.97 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DC C750 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.00
Resolution horizontal: X × r = 2294 × 1.33 = 3051
Resolution vertical: X = 2294
Sensor resolution = 3051 x 2294
Sensor height = 4.32 mm
Effective megapixels = 7.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2294
Sensor resolution = 3051 x 2294
W110 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.20
Resolution horizontal: X × r = 2327 × 1.33 = 3095
Resolution vertical: X = 2327
Sensor resolution = 3095 x 2327
Sensor height = 4.32 mm
Effective megapixels = 7.20
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2327
Sensor resolution = 3095 x 2327
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DC C750 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
W110 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DC C750 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 6.02 = f16.9 - f31.3
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 6.02 = f16.9 - f31.3
W110 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 6.02 = f16.9 - f34.9
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 6.02 = f16.9 - f34.9
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.