Canon DIGITAL IXUS 30 vs. Canon PowerShot Pro1
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon DIGITAL IXUS 30 | Canon PowerShot Pro1 | ||||
check price » | check price » |
Megapixels
3.20
8.00
Max. image resolution
2048 x 1536
3264 x 2448
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
2/3" (~ 8.8 x 6.6 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 2.34 |
(ratio) | ||
Canon DIGITAL IXUS 30 | Canon PowerShot Pro1 |
Surface area:
24.84 mm² | vs | 58.08 mm² |
Difference: 33.24 mm² (134%)
Pro1 sensor is approx. 2.34x bigger than DIGITAL IXUS 30 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.49 µm² (7%)
A pixel on Canon DIGITAL IXUS 30 sensor is approx. 7% bigger than a pixel on Canon Pro1.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon DIGITAL IXUS 30
Canon Pro1
Total megapixels
3.30
8.30
Effective megapixels
3.20
8.00
Optical zoom
3x
7.1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
50, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
3 cm
3 cm
Focal length (35mm equiv.)
35 - 105 mm
28 - 200 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f4.9
f2.4 - f3.5
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
15 sec
15 sec
Max. shutter speed
1/1500 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Electronic
White balance presets
5
6
Screen size
2"
2"
Screen resolution
118,000 dots
235,000 dots
Video capture
Max. video resolution
Storage types
SD card
Compact Flash (Type I or II)
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-4L battery
Canon Lithium-Ion
Weight
135 g
640 g
Dimensions
86 x 54 x 21 mm
118 x 72 x 90 mm
Year
2004
2004
Choose cameras to compare
Popular comparisons:
- Canon DIGITAL IXUS 30 vs. Canon PowerShot Pro1
- Canon DIGITAL IXUS 30 vs. Canon Digital IXUS 40
- Canon DIGITAL IXUS 30 vs. Canon Digital IXUS 60
- Canon DIGITAL IXUS 30 vs. Panasonic Lumix DMC-TZ1
- Canon DIGITAL IXUS 30 vs. Canon IXY 30S
- Canon DIGITAL IXUS 30 vs. Canon Digital IXUS 100 IS
- Canon DIGITAL IXUS 30 vs. Canon Digital IXUS 80 IS
- Canon DIGITAL IXUS 30 vs. Fujifilm X20
- Canon DIGITAL IXUS 30 vs. Kodak EasyShare C433
- Canon DIGITAL IXUS 30 vs. Canon IXUS 125 HS
- Canon DIGITAL IXUS 30 vs. Canon Digital IXUS 50
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon DIGITAL IXUS 30 diagonal
The diagonal of DIGITAL IXUS 30 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Canon Pro1 diagonal
The diagonal of Pro1 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DIGITAL IXUS 30 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pro1 sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DIGITAL IXUS 30 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2063 pixels
Sensor resolution width = 2063 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.79 µm |
2063 |
Pro1 pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 3262 pixels
Sensor resolution width = 3262 pixels
Pixel pitch = | 8.80 | × 1000 | = 2.7 µm |
3262 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DIGITAL IXUS 30 pixel area
Pixel pitch = 2.79 µm
Pixel area = 2.79² = 7.78 µm²
Pixel area = 2.79² = 7.78 µm²
Pro1 pixel area
Pixel pitch = 2.7 µm
Pixel area = 2.7² = 7.29 µm²
Pixel area = 2.7² = 7.29 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DIGITAL IXUS 30 pixel density
Sensor resolution width = 2063 pixels
Sensor width = 0.575 cm
Pixel density = (2063 / 0.575)² / 1000000 = 12.87 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2063 / 0.575)² / 1000000 = 12.87 MP/cm²
Pro1 pixel density
Sensor resolution width = 3262 pixels
Sensor width = 0.88 cm
Pixel density = (3262 / 0.88)² / 1000000 = 13.74 MP/cm²
Sensor width = 0.88 cm
Pixel density = (3262 / 0.88)² / 1000000 = 13.74 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DIGITAL IXUS 30 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 3.20
Resolution horizontal: X × r = 1551 × 1.33 = 2063
Resolution vertical: X = 1551
Sensor resolution = 2063 x 1551
Sensor height = 4.32 mm
Effective megapixels = 3.20
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1551
Sensor resolution = 2063 x 1551
Pro1 sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 8.00
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Sensor height = 6.60 mm
Effective megapixels = 8.00
r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DIGITAL IXUS 30 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
Pro1 crop factor
Sensor diagonal in mm = 11.00 mm
Crop factor = | 43.27 | = 3.93 |
11.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DIGITAL IXUS 30 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Pro1 equivalent aperture
Crop factor = 3.93
Aperture = f2.4 - f3.5
35-mm equivalent aperture = (f2.4 - f3.5) × 3.93 = f9.4 - f13.8
Aperture = f2.4 - f3.5
35-mm equivalent aperture = (f2.4 - f3.5) × 3.93 = f9.4 - f13.8
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.