Canon DIGITAL IXUS 55 vs. Sony Cyber-shot DSC-W110
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon DIGITAL IXUS 55 | Sony Cyber-shot DSC-W110 | ||||
check price » | check price » |
Megapixels
5.00
7.20
Max. image resolution
2592 x 1944
3072 x 2304
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Canon DIGITAL IXUS 55 | Sony Cyber-shot DSC-W110 |
Surface area:
24.84 mm² | vs | 24.84 mm² |
Difference: 0 mm² (0%)
DIGITAL IXUS 55 and W110 sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Canon DIGITAL IXUS 55 (2005) and Sony W110 (2008).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.51 µm² (44%)
A pixel on Canon DIGITAL IXUS 55 sensor is approx. 44% bigger than a pixel on Sony W110.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon DIGITAL IXUS 55
Sony W110
Total megapixels
5.00
Effective megapixels
5.00
Optical zoom
3x
4x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
3 cm
4 cm
Focal length (35mm equiv.)
35 - 105 mm
32 - 128 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.9
f2.8 - f5.8
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
15 sec
1/8 sec
Max. shutter speed
1/1500 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
6
6
Screen size
2.5"
2.5"
Screen resolution
115,000 dots
115,000 dots
Video capture
Max. video resolution
Storage types
SD/MMC card
Memory Stick Duo, Memory Stick Pro Duo
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-4L battery
Lithium-Ion (NP-BG1)
Weight
155 g
156 g
Dimensions
86 x 54 x 22 mm
88 x 57 x 22 mm
Year
2005
2008
Choose cameras to compare
Popular comparisons:
- Canon DIGITAL IXUS 55 vs. Canon Digital IXUS 50
- Canon DIGITAL IXUS 55 vs. Canon Digital IXUS 40
- Canon DIGITAL IXUS 55 vs. Canon Digital IXUS 60
- Canon DIGITAL IXUS 55 vs. Sony Cyber-shot DSC-W110
- Canon DIGITAL IXUS 55 vs. Canon DIGITAL IXUS 70
- Canon DIGITAL IXUS 55 vs. Canon DIGITAL IXUS 30
- Canon DIGITAL IXUS 55 vs. Canon PowerShot A3100 IS
- Canon DIGITAL IXUS 55 vs. Canon IXY DIGITAL 55
- Canon DIGITAL IXUS 55 vs. Sony Cyber-shot DSC-W170
- Canon DIGITAL IXUS 55 vs. Canon PowerShot G7 X Mark II
- Canon DIGITAL IXUS 55 vs. Olympus FE-26
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon DIGITAL IXUS 55 diagonal
The diagonal of DIGITAL IXUS 55 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Sony W110 diagonal
The diagonal of W110 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DIGITAL IXUS 55 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
W110 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DIGITAL IXUS 55 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
2579 |
W110 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3095 pixels
Sensor resolution width = 3095 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.86 µm |
3095 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DIGITAL IXUS 55 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
W110 pixel area
Pixel pitch = 1.86 µm
Pixel area = 1.86² = 3.46 µm²
Pixel area = 1.86² = 3.46 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DIGITAL IXUS 55 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
W110 pixel density
Sensor resolution width = 3095 pixels
Sensor width = 0.575 cm
Pixel density = (3095 / 0.575)² / 1000000 = 28.97 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3095 / 0.575)² / 1000000 = 28.97 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DIGITAL IXUS 55 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
W110 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.20
Resolution horizontal: X × r = 2327 × 1.33 = 3095
Resolution vertical: X = 2327
Sensor resolution = 3095 x 2327
Sensor height = 4.32 mm
Effective megapixels = 7.20
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2327
Sensor resolution = 3095 x 2327
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DIGITAL IXUS 55 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
W110 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DIGITAL IXUS 55 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
W110 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 6.02 = f16.9 - f34.9
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 6.02 = f16.9 - f34.9
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.