Canon Digital IXUS i vs. Canon EOS 40D
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Canon Digital IXUS i | Canon EOS 40D | ||||
| check price » | check price » | ||||
Megapixels
4.00
10.10
Max. image resolution
2272 x 1704
3888 x 2592
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
22.2 x 14.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 13.23 |
| (ratio) | ||
| Canon Digital IXUS i | Canon EOS 40D | |
Surface area:
| 24.84 mm² | vs | 328.56 mm² |
Difference: 303.72 mm² (1223%)
40D sensor is approx. 13.23x bigger than IXUS i sensor.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Canon IXUS i (2003) and Canon 40D (2007).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 26.29 µm² (424%)
A pixel on Canon 40D sensor is approx. 424% bigger than a pixel on Canon IXUS i.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon IXUS i
Canon 40D
Total megapixels
4.20
10.50
Effective megapixels
4.00
10.10
Optical zoom
1x
Digital zoom
Yes
No
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 100, 200, 400, 800, 1600, 3200 (H)
RAW
Manual focus
Normal focus range
10 cm
Macro focus range
3 cm
Focal length (35mm equiv.)
39 mm
Aperture priority
No
Yes
Max. aperture
f2.8
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
No
Yes
Min. shutter speed
15 sec
30 sec
Max. shutter speed
1/1500 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
None
Optical (pentaprism)
White balance presets
5
6
Screen size
1.5"
3"
Screen resolution
78,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SD/MMC card
Compact Flash (Type I or II)
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-3L battery
Canon Lithium-Ion
Weight
140 g
822 g
Dimensions
90 x 47 x 19 mm
146 x 108 x 74 mm
Year
2003
2007
Choose cameras to compare
Popular comparisons:
- Canon Digital IXUS i vs. Canon DIGITAL IXUS i5
- Canon Digital IXUS i vs. Olympus Stylus 810
- Canon Digital IXUS i vs. Nokia Lumia 1020
- Canon Digital IXUS i vs. Canon Digital IXUS 850 IS
- Canon Digital IXUS i vs. Canon IXUS 285 HS
- Canon Digital IXUS i vs. Nikon Coolpix L31
- Canon Digital IXUS i vs. Nikon D700
- Canon Digital IXUS i vs. Samsung ES95
- Canon Digital IXUS i vs. Canon IXY DIGITAL 200
- Canon Digital IXUS i vs. Canon Digital IXUS 40
- Canon Digital IXUS i vs. Fujifilm FinePix Z20fd
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Canon IXUS i diagonal
The diagonal of IXUS i sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Canon 40D diagonal
w = 22.20 mm
h = 14.80 mm
h = 14.80 mm
| Diagonal = √ | 22.20² + 14.80² | = 26.68 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
IXUS i sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
40D sensor area
Width = 22.20 mm
Height = 14.80 mm
Surface area = 22.20 × 14.80 = 328.56 mm²
Height = 14.80 mm
Surface area = 22.20 × 14.80 = 328.56 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
IXUS i pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2306 pixels
Sensor resolution width = 2306 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.49 µm |
| 2306 |
40D pixel pitch
Sensor width = 22.20 mm
Sensor resolution width = 3893 pixels
Sensor resolution width = 3893 pixels
| Pixel pitch = | 22.20 | × 1000 | = 5.7 µm |
| 3893 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
IXUS i pixel area
Pixel pitch = 2.49 µm
Pixel area = 2.49² = 6.2 µm²
Pixel area = 2.49² = 6.2 µm²
40D pixel area
Pixel pitch = 5.7 µm
Pixel area = 5.7² = 32.49 µm²
Pixel area = 5.7² = 32.49 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
IXUS i pixel density
Sensor resolution width = 2306 pixels
Sensor width = 0.575 cm
Pixel density = (2306 / 0.575)² / 1000000 = 16.08 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2306 / 0.575)² / 1000000 = 16.08 MP/cm²
40D pixel density
Sensor resolution width = 3893 pixels
Sensor width = 2.22 cm
Pixel density = (3893 / 2.22)² / 1000000 = 3.08 MP/cm²
Sensor width = 2.22 cm
Pixel density = (3893 / 2.22)² / 1000000 = 3.08 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
IXUS i sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 4.00
Resolution horizontal: X × r = 1734 × 1.33 = 2306
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
Sensor height = 4.32 mm
Effective megapixels = 4.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
40D sensor resolution
Sensor width = 22.20 mm
Sensor height = 14.80 mm
Effective megapixels = 10.10
Resolution horizontal: X × r = 2595 × 1.5 = 3893
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Sensor height = 14.80 mm
Effective megapixels = 10.10
| r = 22.20/14.80 = 1.5 |
|
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
IXUS i crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
40D crop factor
Sensor diagonal in mm = 26.68 mm
| Crop factor = | 43.27 | = 1.62 |
| 26.68 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
IXUS i equivalent aperture
Crop factor = 6.02
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 6.02 = f16.9
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 6.02 = f16.9
40D equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 40D, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 40D is 1.62
Crop factor for Canon 40D is 1.62
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.